What is the Tcode to see all the Tcodes

HI
What is the Tcode to see all the Tcodes

Hi Raj,
As you want to see the list of T Codes, you can get the same by following ways:
SE16 ==> Table TSTC ==> execute and you will get the list of the T codes.
SE93 ==> Give any T code initial which u want to see for ex V* and display this will list all the T codes starting from V.
Hope this will resolve the issue.
Do Reward if useful.
Regards,
Abhi

Similar Messages

On Win7 computer, how can I see all files on iPod touch?

I have an iPod touch 4.3.5 (8L1), model MC540C. When it's plugged into my Windows 7 computer, I want to be able to see all the files (not just the photos). What must i do to see all the files?
My ultimate purpose is to copy one file: the voice recording I created in the Voice Memos application. (The audio file is too big to be sent via email.)

Illass,
Thank you for your reply.
Though PhoneView is Mac only, Touch Copy has a Mac version and Windows version.
P.S. Nice avatar

Which report to see all in out time of an employee?what that is the tcode?

hi
which report to see all in out time of an employee?
which we see in pa61/pa30 in 2011 infotype
if i want to see all employee details in report what that is the tcode?
thanks
regards
rajani

Hi,
You can also check the below link.
http://help.sap.com/saphelp_46c/helpdata/en/8a/984de046c411d189470000e829fbbd/content.htm
Thanks & Regards,
Sandip Biswas

What is the tcode to see all the workitems with out agents?

Hi Gurus,
What is the tcode to see all the workitems with out agents?
Thanks in advancec

SWI2_ADM1
Thanks
Arghadip
Edited by: Arghadip Kar on Feb 21, 2008 5:45 AM

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

HT4085 My screen is larger then what i amviewing. How do i get the screenback to normal size inorder to see all on deck top?

My screen is larger than what I am viewing. Difficult to see all.
Can not get cheats with words to work anymore.
Unable to. Print

Double tap the screen with three fingers to disable the zoom function, then disable it permanently in Settings.

I have a big problem, I don't know what I touched but when I open up my iTunes I can't see all the icons. The only icons showing are "podcast, iTunes U and Downloads" so in other words I can't find the movies, music etc. Which means I can't buy/rent!

I have a big problem, I don't know what I touched but when I open up my iTunes I can't see all the icons. The only icons showing are "podcast, iTunes U and Downloads" so in other words I can't find the movies, music etc. Which means I can't buy/rent!

Not all content types are available in all countries - in each country Apple can only sell what they are licensed to (and in some cases what a country's laws allows them to). A list of what is available where is shown on this page : http://support.apple.com/kb/TS3599
Do you have access to other music and film purchase download sites ?

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

I canno't see the menu:file;help;tools;downloads,they dessapear,how to show them back?Also,what's the tastature tab for forward/back and minimizing all pages at once?I am speaking for mozilla latest version under win 7

What happened to the option to see all your purchased movies alphabetically? I can only see recent purchases and then I have to look by movie type. With over 500 movies purchased this is a huge pain.

What happened to the option to see all your purchased movies alphabetically? I can only see recent purchases and then I have to look by movie type. With over 500 movies purchased, this is a huge pain. For instance the movie Airport 77 is classified as Drama not action? But it is action? I have to look at both types to find the film. I will stop buying films via AppleTV if this is the way it is going to stay. I am not searching for films in this crazy manner.

Same issue here. Might have to do with size of library. I too have over 300 purchased movies. "ALL PURCHASED" folder disappeared yesterday on all my AppleTV's. My son only has 20+ purchased movies and his still shows "ALL" folder. However, I had him log in under my account and "ALL" folder is missing??? I hope Apple gets this resolved quickly. I too do not want to flip through various Genres looking for movies.

HT3576 I accidently cleared the push notifications on my i pad and now i want to see them back.is there any way to see them,because i have to see all the application what the notifications was for.it takes a lot of time.i am isking this to save my time in

I accidently cleared the push notifications on my i pad and now i want to see them back.is there any way to see them,because i have to see all the application what the notifications was for.it takes a lot of time.i am isking this to save my time in future

I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt!

I have saved a FB-site and can not any longer see all the pictures on that saved site. What to do?

I do not have FB myself but a friend saved some FB-sites for me with text and pictures.
At first I could not see all the pictures. Then my friend told me to download Mozilla Firefox and I also noticed that I had to be online to see all the pictures. Otherwise I could only see a few of them.
Suddenly my problem came back although I use Mozilla Firefox and are online.
I don´t think that I have changed anything. What can the problem be. What do I need to do?

Hi,
Please try a '''Ctrl''' + '''F5''' refresh. You may also have to '''Clear Now''' the '''Cache''', '''Site Preferences''' , and '''Cookies''' with '''Time range to clear''' set to '''Everything''' via '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
Please note that as the file is permanently saved in your PC, and if the picture/content location changes, or is deleted on the site then you may not be able to access it.
You can also reset Firefox and check though this would not help if the location has been changed/deleted.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.
If you are able to view all the pictures again, it would also be a good idea to re-save the site as MHT or MAFF using either [https://addons.mozilla.org/en-US/firefox/addon/unmht/?src=search UnMHT] or [https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/?src=search Mozilla Archive Format]. Additionally you may also want to save another copy after choosing '''Work Offline''' via '''File''' ('''Alt''' + '''F''') and you can later check both the saved files when not connected to the internet and keep one that is complete.

HT201272 Hey I just got an iphone 4S as my 4 was stolen. I synched it and I can see all of my music but I can't get the songs to play... When I hit play it screen starts flipping thru all my music then goes back to main screen. What do I do. Thanks :)

Help! On my new iPhone 4S, I can see all of my music and vidoes that I downloaded from itunes that I had previously purchased on my iPhone 4, BUT I can not play any of the songs! When I hit "play" from my 'albums' and 'playlist' or 'songs' it looks like it is going to play the song when the song screen comes up showing the album but then the screen starts flipping from album to album or song to song randomly. Then after flipping thru anywhere from 10-15 songs, it stops and goes back the previous page showing my list of music.... I have synched my phone, restored it and downloaded all of my music and videos. The only things I can get to play from my iPod on my iPhone 4S is my videos, no music. Can anyone help me? I have been trying to figure it out for days and I am a bit frustrated. Thanks in advance for any help I may receive.

Basics from the manual are restrt, reset, restore.
Have you tried each of these?

What do the Tcodes mean?

Hi,
I have joined SAP recently. Please provide information about why Transaction Codes (SE, SM, etc...) are named so?
What is the expansion of SE, SM...?
I appreciate the help.
Thanks,
Shwetha

Hi Shwetha,
SE means System Environment
SM means System Management
As such there is no logic behind using SE or SM. But looking at the transactions one can say that all the SM transactions are for Monitoring purpose while all SE transactions are Executable transaction.
See here:
Re: Usefull Transaction Code
Go SE11 and give the table name "TSTC" and click on display, u can get all the tcodes.
or
Goto Transaction SE84 --> Other Objects --> Transactions
--> In the Transaction Code enter 'RS', 'SE', 'SM*' those are all the BW & R3 transactions used.
Assign points if it helps.
Rgds,
P.Naganjana reddy

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

What is the Tcode to see all the Tcodes

Similar Messages

Maybe you are looking for