What is the technical reason for lack of Audible support on Zen Micro and othe

This is addressed to the any Creative developer who reads this. I am a developer and find it hard to understand why a relati'vely brain-dead product like a 28 Meg Muvo Nomad can support Audible but the more powerful Zen Micro's cannot.
Can someone give us the technical reason for this?

I dont think there is a technical reason behind it. A simple firmware update should be able to support Audible, OGG, and the rest of formats that the player does not support.

Similar Messages

What is the Technical Reason for Creating Message Type

Hi,
Is there any particular reason to use Message Type. Already we are defining Data Type. Please give me some detailed explanations.
Thanks in Advance.
Thanks & Regards,
Giridhar.C

Hi Giri,
SAP telling below reason why we are creating message type
"A message type comprises a data type that describes the structure of a message. For technical reasons, a data type alone is not sufficient to describe the instance of a message: Data types are defined in XML Schema as abstract types that are not yet tied to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message"
Regards,
Raj

HT201343 What's the technical reason for Apple not supporting AirPlay Mirroring in OS X Mountain Lion for earlier iMac's?

Apple support was of little help...

See this article:
Calm down, 10.8's AirPlay restrictions are technical - not planned obsolescence

Mac Pro first generation can't load Mavericks. What is the technical reason?

Someone I know has an original Mac Pro, from 2006. I know it says that Mavericks requires at least a 2008 Mac Pro. What is the technical reasons for not including older hardware? I understand the points about the G5 and before cannot go higher than Leopard, because they stopped supporting non-Intel Macs. However, the Mac Pro, is an Intel Mac, and of course I know that Apple wants you on newer hardware, but that original Mac Pro is still a capable machine. I would like to know if there is something about what is in Mavericks (and future OSes) that precludes them from installing on older Intel Macs.

That computer has a 32-bit EFI. Mavericks requires a 64-bit one.
(113006)

Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

Hi there, why my hp dv6700 laptop having a pink monitor. What's the main reason for that? thank you

If all is pink (but you see the desktop), then normally one colour cable is broken - I think blue is off.
In your case (laptop) the connection to the display seems to be damaged, so the blue information is lost.
Normally you can test it when you twist the connection between pc and monitor. But I don't know if this works with a laptop.
V.
*** Say 'Thanks' with Kudos ***

What is the best software for burning a large slideshow with 500 photos and music to DVD?

What is the best software for burning a large slideshow with 500 photos and music to DVD?

Are you talking about strictly burning an already put-together slideshow or composing one and then burning it?
My all time favorite slide show maker is Photo to Movie; you can then burn it from there or get it into iMovie and/or iDVD for the "finishing" touch. My favorite burn software is Toast, although you can use iMovie, iDVD, and Finder as well.
http://www.lqgraphics.com/software/phototomovie.php
http://www.roxio.com/enu/products/toast/titanium/

What's the common reason for socket write errors?

I just encountered some problem in my recent programming work.
The error message is something like "java.net.SocketException: Software caused connection abort: socket write error", strangely enough, sometimes it can work without the error, but sometimes, the error occurs with the same test case.
I just want to know what's the mainly reason of this error?
Thanks a lot.

After checking the codes, I realized that it is because when I return a String object from an function and send it to the other end through socket, sometimes the other end receive a "null" object, and because I have to use the instance method of the object, so the error occured.
But I am confused why I send a string to socket, but sometimes I got a "null" object at the other end, I am sure the string I send is actually not "null" the the send side?

What are the main reasons for SAP-HR Implementation Failures?

Dear Consultants,
Can some one shed the light on the following items:
1. At least 3 main reasons for failure of SAP-HR Implementations?

Hi,
Check this link
http://searchsap.techtarget.com/news/article/0,289142,sid21_gci892265,00.html

What are the possible reasons for bill simulation fail on one day or

one period? Thanks.
ie:
Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
Edited by: dan421 on Oct 24, 2011 11:23 PM

Hi,
There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
Ritesh

What are the possible reasons for a procedure to go into uncompiled state?

hi,
we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
following is the error message that is displayed when this procedures are failed:
ORA-04062: timestamp of package has been changed.
Kindly help me.
Thanks,
Raaji.

Thanks for the reply.
No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
SELECT name, value
FROM gv$parameter
WHERE name = 'remote_dependencies_mode';
Do I need to change this value to SIGNATURE?
Thanks,
Raaji.

What are the ideal specs for professional graphic designer using CS5 illustrator, photoshop and indesign?g

What are the ideal Mac Pro specs for a professional graphic designer using CS5 Premium- using mostly InDesign, Illustrator and PhotoShop?

24GB RAM
SSD for boot drive
GHz, but not necessarily dual. Apple doesn't sell dual 3.33s.
A single 3.33 6-core should do fine and "sweet spot" (when looking, there is "4-core" build to order..,. and like everything else on the Store, why in heavens they didn't be more accurate and clear and say "single socket" and then have "dual processor configurations" 0 I guess the writers don't understand or know workstations or jargon? I say that 'cause some have trouble even finding the 6-core 3.33 choice ($1200 over stock 2.8 4-core).
W3680 though can be found on Buy.com for $620 (was $589 at earlier date) and people are known to then sell the stock cpu $300 making it even more attractive and save $600-900 that way rather easily. Or not.
But yes, I would send you to MPG.com site as well and read through what is on there.

What are the possible reasons for adobe flash player crashing constantly?

I utilize mixcloud, soundcloud,and podomatic on a daily basis, and recently have been having problems getting these three to play. I'm not certain if there is a clash between the various plug-ins within my mozilla firefox browser. The error messages that I have been receiving sometimes acknowledge the problem as a adobe flash player error, a shockwave flash player error, and sometimes as a flash blocker being enable in my browser, which keeps me from receiving any audio playback and the music from downloading onto the page. I'm constantly being asked to reload the page, or request a crash report. Has anyone encounter this problem? Help!

Uninstall BOTH Flash Player and Shockwave using the Control panel.
Reinstall both using Flash Player Plug-in (All other browsers)
and http://get.adobe.com/shockwave/
Reboot
In Firefox, click Tools>Addons
Check to be sure BOTH plugins are enabled and the LATEST version

What's the best format for a movie to be in a site and be viewed by a PC?

I created a temporary web site using GoLive. I imported a short movie in 2 different versions (1 medium for DSL/Cable and 1 small for Dial-up). When I tested the site either in Explorer or Safari on different Mac computers at home, they both loaded and played OK. However, none of the videos show the bottom bar where the start/stop/volume control appears. Also noticed in a PC that the video had a broken link.
I created a link for QT for Windows so that any PC would be able to download for Free (I don't know if that's the answer).
Is there a universal format that could be saved or exported in QT for PC viewers?
And, why my movies don't show the control bar at the bottom?
The movies were exported as a QT ".mov" Streaming Medium and Low. You can visit: http://www.warreninstitute.com to check them out.
I'd really appreciate if anybody would suggets a better way of handling these short movies.
Thank you!
-sal
G3, G4, G5, iMac G4 Mac OS X (10.4.4)

Avoid H.264 video codec (default in many presets) so older versions of QuickTime can view your files. Use MPEG-4 or H.263 or Sorenson 3 instead.
The reason your controller isn't showing is because you've (probably) didn't allow for it in the movie dimensions. A 320X240 .mov file would become 320X256 (16 pixels for the controller).
Make sure you're using the proper "tags" (object and embed) in your page code.
More info here:
http://docs.info.apple.com/article.html?artnum=61011
No need for "streaming" (hint tracks) in your movies. They are only used by special software if your files are served from streaming servers. Your files download and the hint tracks only add to the file size and are not needed.

What are the methods available for passing data between Labview 6.0 VI and another custom windows program

The big picture is that I'm trying to use labview to interface to a DSP board.
I already have a small windows application "app" which communicates with the dsp. Now I want Labview to grab data from the "app" and plot/analyze ... etc.
I'm a novice at this 'interprocess communication stuff", what can I use to pass data back and forth between between the "app" and LV?
use ActiveX, DMA, streams, etc.?
In a crude sense I could just have the "app" write the data to a file and then have LV read the file. (can two applications read the file at the same time?), but
this seems very slow and clumsy. I'd rather have a RAM based FIFO which both could access.
Thanks!
G
Details:
Pentium120 Windows 95 Host
Spectrum TMSC30 DSP
VC++6
LV6

It depends on what 'interprocess communication' your "app" program has available.
I regulary use DDE to control a PLL App which controls our PLL via the LPT Port. This is only a write process, but works very easily. The read is equaly easy. You need to know the various "keywords" like service, topic and instruction which the "app" will respond to.
Generaly I found ActieX to be more extensive, meaning its probably going to take longer and more steps to achive similar simple results.
The file does not seem to be the best way.
Hope that helps a bit.

Understand the technical base for Enterprise Services?

Hi all,
I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
Note 1359215 u2013 Technical prerequisites for using enterprise services
sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
a. An EHP (with relation to a business function).
b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
Thanks for your feedback!
Chris

Hi Chris,
I'll try and provide answers where I can...
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
- If you want to enhance standard SAP Enterprise Services
- If you want to do additional transformation/s & routing.
If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
Regards, Trevor

What is the technical reason for lack of Audible support on Zen Micro and othe

Similar Messages

Maybe you are looking for