What is the transaction to fill Setup tables for 2LIS_08TRFKZ

Hello Friends,
I am using OLI8BW setup table transaction for 2LIS_08TRFKZ extractor. Is this transaction correct?  Its not just working.
Thanks
Simmi

why don't you go through the menu if you're not sure about the transaction code?
SBIW > Settings for Application-Specific DataSources > Logistics > Managing Extract Structures > Initialization > Filling in the Setup Table > Application-Specific Setup of Statistical Data > LES - Shipment Costs - Carry Out Restructure
then launch it and follow menu
System > Status
it will tell you the transaction code (= VIFBW)

Similar Messages

  • Transaction to fill setup table for 2LIS_18_I3HDR

    Hi
    What is the transaction code for filling up the setup table in R/3 for 2LIS_18_I3HDR?
    Kind regards,
    Torben

    hi,
    Navigate like this sbiw-> Application specifcic data sources-> Logistics->
    iniitlization-> perform the execute set up for the relevant application.
    I wanted to know whether it is lo data source or not
    regards
    Message was edited by:
            Shahid Syed

  • How to Fill Setup tables for MAP (IS- Retail)

    Hello,
    I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
    2LIS_40_REVAL
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208
    Your reply is highly appreciated.
    Regards,
    Naresh

    Hi Naresh,
    We cannot fill setup tables for each data source.
    ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
    If you want setup tables names of your data sources please check below.
    2LIS_40_REVAL      ---   MC40RP0REVSETUP.
    Comes to your second post.
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208   these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
    If you are using LO data sources then no need to use LIS data sources.
    Regards,
    Venkatesh

  • How to fill setup table for Application 18 Customer services

    Hi,
    How can I fill setup table for application 18.
    Regards,
    ST

    Hi,
    To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
    SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
    Also pls chk this;
    Re: query on setup table filling
    Regards
    CSM Reddy

  • Trying to fill setup table for 2LIS_04_P_ARBPL

    Hi
    I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
    Am I missing a step?
    Thanks
    Pooja

    I went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
    Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
    I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
    Then I got the message - datasource still contains data to be transferred.
    Thanks!

  • Tcode to fill setup tables for application 0CS( Customer Service)

    Dear Experts,
    i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
    the datasource comes under the appilcation 0CS( Customer Service).
    when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
    Could you please let me know the transaction to fulfill the same.
    Regards,
    Sunil...

    Hi SunilKumar Bolle,
    For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
    The only way to say thanks in SDN is to assign Points.

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • How to stop document posting when filling setup tables for logistic app.

    Hello Boys
    I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP,  are running?
    So I have some questions
    1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
    3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
    4) Every logistic applications has a different procedure??
    thanks (with points of course) for any help
    rgds
    A. Garduñ

    Hi Azael:
    Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
    2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
    3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
    hope it helps.
    assign points if helpful
    kalyan

  • Filling setup tables for 2lis_03_um

    hi
    i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
    its asking Archiving Run  . i am trying to give or f4 its not allowing me?
    please let me know

    Hi Suneel........
    Check this thread by Roberto Negro......
    Archive run.
    Hope this helps.....
    Regards,
    Debjani.....

  • Steps for setup tables for 2lis_08trfkz?clarification?

    Hi guru's
    we want to enhance the extrator 2LIS_08TRFKZ.
    I just want to know which transaction we use to fill setup table for this extractor.
    Do we use OLI8BW or something else
    A quick response wil be highly appericiated.
    Regards,
    Amandeep

    Hi Srikanth,
    Thank you for a quick response.
    Yes i have deleted the setup tables before filling them
    the job status say it is finished
    the only bit i am worried is the log which says the setup is for application 12 although we are running it for 2lis_08trfkz and which is under application 8(shipment).
    Please clarify if this is the it is suppose to work.
    Once again thank you very much for your help and time.
    Regards,
    Amandeep.
    Start date        14.10.2006   Name of run      TRFKZ      
    Start time        19:49:49     User name        SINGAM     
    Date of terminatio00.00.0000   Application      12         
    Time of terminatio00:00:00     Source table     LIKP       
    Finish date       15.10.2006   New run                     
    Finish time       03:53:37     Document from    0000000000 
    Duration (min)    483.8        Document to      ZZZZZZZZZZ 
    No. of docs       1,707,237    Version          &(         
                                   Variant

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • How to fill setup table for the Extractor: 2LIS_02_CGR

    Hi,
    Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
    Could any one provide me the step-by-step to fill the setup table.
    Regards,
    Prem
    Edited by: pannalde on Dec 2, 2010 6:03 AM

    Hi Prem:
        For more details please refer to the blog by Paulo Junior.
    "The SET UP!"
    /people/paulo.junior/blog/2010/11/25/the-set-up
    Regards,
    Francisco Milán.

  • Error while filling setup table for Quality Mangement D/Sources

    HI Experts,
    Iam trying to fill the QM setup tables.
    Steps iam following are
    1.T-code OLIQBW
    2.Selecting Event QV, QE and gave selection parameters and name for Run.
    3. Execute
    4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
       Exception  CX_SY_DYN_CALL_PARAM_NOT_FOUND
       Date and Time          27.08.2009 11:21:01                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.

    Hi Mansi,
    Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN                                                 
    Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND                                             
    Date and Time          27.08.2009 11:56:20                                                                               
    ShrtText                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLQMER" had to be terminated because one of the                  
         statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                                     
         with the parameter "I_ADDITIONAL_DATA".                                                      
         This parameter is not defined.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                     
         . The exception, which is assigned to the class                                              
          'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither                                               
         caught nor passed along using a RAISING clause, in the procedure                             
          "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                     
          to occur, the running program was terminated.                                               
         The reason for the exception is:                                                             
         The reason for the exception is:                                                       
         Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                               
         with the parameter "I_ADDITIONAL_DATA".                                                
         This parameter is not defined.                                                                               
    Missing RAISING Clause in Interface                                                        
         Program                                 SAPLQMER                                       
         Include                                 LQMER$01                                       
         Row                                     5                                              
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS                                                                               
    Trigger Location of Exception                                                              
         Program                                 SAPLQMER                                       
         Include                                 LQMERU01                                       
         Row                                     488                                            
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS

Maybe you are looking for

  • Output in RTF format

    does HTMLDB provide any option for displaying the data in RTF format? I have a PLSQL procedure that creates a HTML report on the fly. Now I am planning to generate XSLFO output and use FOP to create RTF document from this XSLFO output. Is there any o

  • How to put header in a report?

    hi, I am working on a  cash flow report. In this, in the selection screen, I am giving selection fields as Profit Center and Period ( MM/YYYY) format. now, while displaying the report I want that the period which has been selected in the selection fi

  • Dreamweaver created website on Apache/Tao Linux host

    I was creating a simple 5 page website based on a DW template, and once I FTP'd the home page ("Index.html") to the web host, I recieved an Apache setup screen - as if the file I placed wasn't read or understood. I renamed the original Index.html bac

  • Can't Save Photos on Iphoto

    Hello, so I recently upgraded my MacBook Pro to the new OSX Mavericks and now I can't save my photos on Iphoto. Before I could totally just take a picture no problem but now I get the message "Photo Booth encountered an error when trying to save your

  • Itunes don't recognise my new ipad

    itunes don't recognise my ipad