What is the URL commands for pre-filling a widget

I want to enter fields for the singer

You're going to need to explain your question better. In the mean time though i think the REST api documentation may be of use:
REST API — Document E-signature Software — EchoSign

Similar Messages

I just got iTunes 11.0. I'm used to being able to return to the beginning of a song by hitting 'enter'. What's the new command for skipping to the head of a song?

I just got iTunes 11.0. From all the previous versions I'm used to being able to return to the beginning of a song by hitting 'enter'. What's the new command for skipping to the head of a song?

Mmmmmm. Works OK for me. I've tried every variation I can think of. Play from playlist, play from library, shuffle on, shuffle off, single song repeat on/off, playlist repeat on/off.
WAIT !! Now I've found it !! It happens when I have the sidebar hidden and play a playlist from the PLAYLIST pane. Hitting Enter then takes me to the FIRST song in the playlist.
WAIT AGAIN !!! In the time it took to write the above, it changed again and works properly. Well properly is not really true. It works if I stay in the PLAYLIST pane. If I switch to the SONGS, ALBUMS or ARTISTS pane, enter does nothing. BUT, if I switch to the GENRES pane, enter starts the first song there. AND, if I've switched away from the PLAYLIST pane and switch back, enter then starts the first song in the playlist.
WOW !! That was a crazy ride. I think we can safely say that there is something awry.

What Is The Terminal Command For PRAM & SMC Reset?

Hi Folks - Cant get my Macbook Pro to shut down (instead it does a re-start) thus the key combination for these re-sets doesnt seem to function (no chimes). I saw in another thread a terminal command entry "sudo nvram boot-args=”-p -r” but I also saw it mentioned that entering that casued the following to pop-up "Note that resetting the PRAM will wipe out the contents of the boot-args environment variable, which means the command would need to be reissued each startup." Whats with "reissued each startup"? Also would like a an SMC re-set command. THANKS in advance!

I dont know of a terminal command but here is how to reset the SMC:
Resetting the System Management Controller (SMC)
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

What is the sql command for SELECT with OR condition

Hi
What is the correct sql command for doing select with or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!

Hi
What is the correct sql command for doing select with
or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a
serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!Make sure you bracket your OR conditions
eg
SELECT * from TempData
WHERE column = 'VALUE'
and port = '123'
OR serialnumber = '555'
is read as
SELECT * from TempData
WHERE (column = 'VALUE'
and port = '123' )
OR serialnumber = '555'
which is not the same as
SELECT * from TempData
WHERE column = 'VALUE'
and ( port = '123'
OR serialnumber = '555' )

Voice Control - does it learn and what's the "Wrong" command for?

1) Like others, I find Voice Control laughably inaccurate sometimes when trying to get it to play an artist. I'm wondering if it "learns" and gets better the more you use it?
2) In the manual, there's a command you can called "wrong" or "nope". In what situation would I use it? Whenever I've tried so far, by the time I get to say it, the original (incorrect) command has already executed!

"Wrong" or "No" is for stopping a command and returning voice control to the listening phase. "Cancel" takes you out of voice control. If the command is to play or call a specific name, you can cancel it, but if it's a simple command like "play", "shuffle", "genius", or "what's playing" there is no cancel.
VC for iPod control seems to have a serious bug. It's not inaccurate, it's just not working.
There seems to be a condition where it will only recognize the first few artists in your library, and often not at all. I have restored my phone several times, rebuilt my iTunes library on the PC, and have yet to get it working properly.
I have experienced, variously, after each restore and reload of the phone:
- Voice control will not start, or never gets to where it is listening (with the waveform). This can usually be fixed by a hard reset.
- Only artists from the first part of the alphabet are recognized. Only albums by these artists are recognized, regardless of letter. If I say anything else, it will pick the artist/album from these artists that sounds the most like what I say. One time it was artists A-F, the other time it was just the first 4 "A" artists. Contacts and playlists are recognized OK.
- Even worse: No artists, albums, or playlists are recognized. Simple commands and contacts still work. This is where I'm at now, after a clean load of iTunes, a newly built iTunes library, a complete restore of the iPhone software, and set up as a NEW phone (no backup restored). That's as clean as you can get.
I've been to the Genius Bar, and I've called support. Both times they have escalated my case to an an engineer. Apple is willing to replace my phone in-store tomorrow, but I don't think it is a hardware problem: The mic works, the headset mic works, and other VC features work.
The only thing I can think of at this point is there is some artist/album name in my library that is causing it to fail?

What is the key command for locating a bar and beat

I record myself and clients who want to continually locate and start playing at different bars and beats very quickly so I can punch them in to record. In Digital Performer I use the period key to type in the bar and beat and in Pro Tools I use the equal sign. Maybe I'm asking the wrong key commands question but I can't find the locate bar and beat command in Logic 9. I know it's probably the most simple thing, but I can't waste any more time looking for such a basic operation. Seems like it should be easier to find the command.
Thanks,
gregosophy

Hi
Try a (basic) search of the keycommands for "Go"
Preferences:keycommands
HTH
CCT

What are the keyboard commands for these bodycopy adjustments?

Hi,
I've been through my CS3 manual (and all over my keyboard) - trying to understand how to add leading to my paragraphs. I've done it before - which is why this is so maddening. Also how do I create a "circle C" off the baseline?
Thank you in advance.
hab

A circle C? First if you don't know what the symbol is you probably shouldn't be using it. I think you are referring to a Copyright symbol which Wikipedia has a long definition for ( http://en.wikipedia.org/wiki/Copyright ). A Copyright symbol can be inserted using the Insert Toolbar -> Text tab and clicking the Drop-Down arrow at the end which will give you the © or similar HTML code depending on the charset of the page.
The next think you need is the CSS for text-indent. Adding the text-indent CSS to the class/id of your text will allow you to indent the first line of your paragraph:
http://www.w3schools.com/cssref/pr_text_text-indent.asp

What is the url field for?

That's it.
the iCal Help is non-existent, so I'm asking here.
I filled it in, but the alarm email didn't mention it. What's supposed to happen?
Thanks

Hi Johney..
Check this link..
SLD configuration and JCO connection
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/783c00eabd1ad0e10000000a114cbd/content.htm">Configuring and activating SLD</a>
<a href="http://127.0.0.1:3597/help/index.jsp?topic=/com.sap.devmanual.doc.user/43/e98e76e1582d53e10000000a422035/content.htm">Configuring SLD Step by step Process</a>
Urs GS

What is the keyboard command for opening the disc drive on a G5

fried old keyboard and am using an older one that doesn't have an "open" button. Thanks in advance

Yes, it’s the same for me. In this case I didn’t know about drutil. I don’t want to take this off-topic, but just a quick question to you, chorleyman: I see you’re using a Firebox. Are you satisfied with it? I believe it’s Core Audio compliant. Back then I had to decide to get the Edirol FA-66 or a Presonus Firebox. I’m absolutely happy with mine, but I’m just curious...

What is the URL link for Crystal Report samples from Richard Duffy or SAP?

Hey Experts,
I recall there is a website provided by Richard or SAP that gives away free sample of various crystal reports, or charges for some reports at a minimal price.
Anyone know the website link??
Thanks!
Chinho

Hi Chinho,
You may check his website first:
http://www.richardduffy.com/
Thanks,
Gordon

What is the new command for "Save As" in iWork?

How do I start a new file from an old file?

If you have inside knowledge of anything going on at Apple, you can't share it here.
If you don't, you are engaging in speculation.
I encourage EVERYONE to file feedback the more who file the more likely something will be done.

What is the key command to open Audition in Logic 8?

The little play icon in the bin, sample editor, etc.
The one for auditioning things.
Doesn't work for me. The only way I can get, for example, a playback from cursor position in the sample editor--is to manually click on the little green play icon with the mouse. Same with the bin, loops, and so on.
For many years I've had key commands to do this kind of thing, but it is broken for me since Logic 8. What is the key command for this called? I've tried disabling the space bar as a key command, and I've also tried re-enabling it for "play or stop". Although in the latter case, that should still function the way it does in the arrange window.
Actually, I've tried a lot of things and I'm completely out of ideas.
I posted on this subject several months ago and it remains unresolved. For the life of me I cannot get the audition button to work via any key command.
Help?
TIA
Message was edited by: danseq

Hi
If you imported your key commands from version 7 there can be problems in version 8.
Try using one of the key command presets from version 8.
HTH
CCT

What is the url for executing PL/SQL via 9i http

what is the URL for 9i http server pl/sql routines that I just compiled? I don't run 9ias just the 9i http server
http://machine:port/?????????/procedure_name
thnx
endre

do this if you are still having problemd
CREATE AND SETUP NEW USER
The second step is to create an application user that will
own the code for this example. Connect to SQL*PLUS as a user with
DBA rights, and execute the following commands:connect
SQL> CREATE USER user IDENTIFIED by user;
SQL> GRANT CONNECT, RESOURCE TO user;
CONFIGURE DAD IN THE PL/SQL GATEWAY
The third step is to create a new DAD.
Enter the PL/SQL gateway configuration menu. The generic address to the
page is
http://<machin:port/pls/admin_/gateway.htm
The is specified in your plsql.conf file. By default the address
will be
http://..:/pls/admin_/gateway.htm
(Replace ..: with the valid entry for your
configuration, e.g. www.acme.com:8080).
Click on the link 'Gateway Database Access Descriptor Settings' to access
your DAD settings. Then press the link 'Add for WebDB 2.x configuration'
to create a new DAD. Enter the following values:
Parameter Value
Database Access Descriptor Name give name
Schema Name the user you created
Oracle User Name the user you created
Oracle Password the password of the user
Oracle Connect String <- found in your
tnsnames.ora
Document Table documents
Document Access Procedure user.package.procedure
Extensions to be uploaded as LONG RAW
Leave the other parameters as they are. If you are not using an 8i database
or need to use the LONG RAW datatype for
some reason, you can place an '*' in the "Extensions to be uploaded as LONG
RAW" field. You can also limit this to
specific file name extensions such as jpg or pdf by entering the extensions
and using a comma to separate the
values. Click the OK button to save the DAD configuration.
Hope this helps

What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number

What is the URL that Adobe Acrobat needs to contact for Activation after you enter the serial number? We need to allow internet access to our users for it.

there are quite a few but they all are on the adobe.com domain.

What is the url for executing PL/SQL

what is the URL for 9i http pl/sql routines?
http://machine:port/?????????
thnx
endre

Hi endre,
Are you looking for the URL for executing Oracle9i PSP routines?
-shefali

What is the URL commands for pre-filling a widget

Similar Messages

Maybe you are looking for