What is the use of additional file(s) in sender file adapter?

Hi experts,
what is the use of additional files parameter in sender file adapter?
give me some example.......
Thanks & Regards
E.Ravi Chandra Reddy

Hi,
please check the below link,
you can specify additional files to be included in the XI message as attachments.
http://help.sap.com/saphelp_tm90/helpdata/en/44/692ab8a4b633eae10000000a1553f6/content.htm
Regards

Similar Messages

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

What is the use of XML file in EJB

Hi,
Generally EJB contains
1) Home Interface
2) Remote Interface
3) Bean class
4) XMl file
In xml file we will mention something like
<home>name of home interface </home>
<remote?name of remote interface</remote>
what is the use of this xml file and how it works.
Thanks.

It's called the deployment descriptor and it's used by the container to support your bean's configuration. For instance, if you want container managed persistence for an entity bean then you need to tell the container which table to use in which database with the column mappings, etc.

What's the use of this file?

I found a file with the name [email protected] in $oracle_home/dbs.
I deleted it and my oracle works as usual.
What's the use of this file?
Thanks

I hope you took a backup of that file before zapping it. As a rule, it's a very bad idea to just delete a file in the Oracle directory to see whether anything breaks.
If you had read the documentation you would have discovered that [email protected] is part of the RMAN configuration. So your database will continue to work up until the point you try to use RMAN to recover it. If you don't use RMAN then you probably won't miss that file.
Cheers, APC

What is the use of properites file

what is the use of properites file

Hi there
Usally a program has some variables that the user can set.
These variables are then saved in a file.
The Property class can read these files and search for special keys in that file for example
Lets say that the program that you have developed
can change its background color.
the user sets the color to pink
and the program stores the valu in the property file.
then the property file entry could look like this
color = pink
On windows systems this is verry much like the ini files if you are familiar with these. (I think allmost any OS has something similair)
In JDK 1.4 there is a new system for dealing with property files. This new class is storing the attributes directly to the register on the os
/Markus

What is the use of targetNamespace in the WSDL file and what goes into it

I am not sure how is targetNamespace useful in WSDL definition. Are there any rules for putting value into that attribute. My code generator works for any value.
For example, Both the following code snippets work.
<xsd:schema
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.microsoft.com/ShopWS">
and
<xsd:schema
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="foo">
Then what is the use of having a 'targetNamespace' attribute.
I am new to Web Services, plz help me understand this, even if what I am asking is very silly.
Thanks.

The targetnamespace is used define the namespace for the definitions made in your schema.
For example,
<xsd:schema
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="foo">
<xsd:complexType name="fred">
</xsd:complexType>
Then "Fred" will be in the "foo" namespace
And if you had another schema in your wsdl like
<xsd:schema
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="bar">
<xsd:complexType name="fred">
</xsd:complexType>
Then you would have two "fred" types one in the "foo" namespace and one in the "bar" namespace.
Then later on in your WSDL you could refer to either one.

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the uses of this programe(accelerometer)?

what is the uses of this programe(accelerometer) in N95 original or N95 8g and from where I can get it?

This is Rotateme, but needs to be signed.
http://www.bysamir.fr/rotateme/
This is the movingball which just needs to be installed (doesn't require signing).
http://research.nokia.com/files/MovingBall_Example.sisx
Nokia N95
V 20.0.015
0546553

Why do we use open URL in default browser function? What are the uses of it?

Why do we use "open URL in default browser" function? What are the uses of it?

kdm7 wrote:
Okay.
So can we keep a web button to access the www.ni.com ? So that web site opens only when button pressed?
P.S I,m a newbie.
Yes, you can also, e.g. include a help file or manual as html and open that in the browser.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What is the use of Host in Technical system

Hi experts,
While creating Technical sytem what is the use of creating Host.
while creating Business System we create Logical System.When we are creating for Sap system then there we give client logical sytem name,but while creating for third party systems what is the use of it.....
while creating Technical system and Business system v have 4 radio buttons
Web As ABAP
Web as Java
Standalone
thirdParty
what is the use of Standalone when and in which senario we use this Standalone.
Note:valuable anser will be rewarded.
Regards,
Phani

Hi
1. Third Party: Can be any Tech System. For example you want to send a xml message from a file adapter residing on your PC. You can define your PC as a 3rd party Tech/Business System.
2. StandAlone Java: WEBAS640 has got Basis and Java Stacks. If you installed <b>only the standalone java Stack on a server</b>, then you define a standalone java tech system.
Regards
krishna

What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
regards,
Nick

What is the use of Multiple source in Logical Table under BMM Layer?

what is the use of Multiple source in Logical Table under BMM Layer?
thanks in advance

Or more generally speaking:
To create a "logical table" consisting of multiple "physical tables"...hence the names. It's the backbone of the whole BI server concept and the way the rpd handles the requests.
I.e.: how would you otherwise proceed for making an analyzable table from SAP, Teradata, Oracle and a flat file with no full change-access to all the data sources?

What is the use of version attribute in jnlp tag??

Hello,
I want to know what is the use of version attribute in jnlp tag.
For ex:
<jnlp spec="6.0+" codebase="$$codebase" href="$$name" version="1.1">
</jnlp>
In the spec it explains:
In the Jnlp tag:
version = The version of the application being launched, as well as the version of the JNLP file itself.
1. Is this version attribute would work as version attribute in jar tag. Ex: <jar href="application.jar" version="1.1"/> ?
i.e. can we specify different jnlp's with the same name as we do for jar's with the help of version.xml.
Any help is greatly appreciated.
//Anjali

Hi Reddy,
If one Info Object depends on another info object we will make that dependent info object as a compounding attribute of main Info object.
Eg: Storage Location – Plant
In above eg there is no meaning of Storage Location without Plant. So, we will make storage location as compounding attribute of Plant.
Regards,
Sreehari.

What is the Use of Imported Archives in Mapping Objects

Hi All,
What is the Use of Imported Archives in Mapping Objects ( IR )
Regards
Vamsi

Hi Vamsi,
When we are doing JAVA , XSLT mappings we have to do import archievs
after developing the JAva mapping in NWDS and create jar file come back to IR under imported archieves we will import the jar file.
Similarly XSLT als make the zip and import under imported archieves
Also when we have any java packages ,import it under archieves and make them to use in UDF
See the below links
XSLT Mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
Check this thread...
Reusability of User-defined Functions
Check this thread...
Re: User-defined function in multiple Message Mappings
Using external JARs in Web Dynpro Dev.Component
see sap documentation:
http://help.sap.com/saphelp_nw04s/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/frameset.htm
Cheers...
Vasu
<b>** REward POints if found useful **</b>

What is the use of additional file(s) in sender file adapter?

Similar Messages

Maybe you are looking for