WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

Similar Messages

What is the use of Activate GuiXT option

What is the use of Activate GuiXT option .

GuiXT is a frontend design tool that allows you to taylor SAP standard transactions without modifying the backend ABAP code. It is a part of SAPgui and runs on the client PC, based on script files either on the PC or a network drive.
Functionality of guiXT from the SAP help;
"You can insert default values in fields
You can hide fields and groups of fields
You can move fields
You can add and change texts
You can add input help
You can add new screen elements like checkboxes, pushbuttons, graphics, or documentation
You can customize tables
You can change field labels on a system-wide basis"
Regards,
Nick

What is the use of head,put options requests ?

What is the use of requests HEAD,PUT, OPTIONS etc. ?
How do we implement all these things ?
Namanc

See the HTTP specification (http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html#sec9) for definitions of the different methods.
You can implement them by overriding the appropriate doHead(), doPut(), doOptions(), etc methods in your servlet class.

What is the use of my alerts option in ibook store?

What is the use of the option " my alerts" in ibook store?

kutielah wrote:
What is the use of the option " my alerts" in ibook store?
It allows you to get email notifications of specific authors, when they release new titles, for example. You can select specific authors, or have it based on previous downloads.

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

What is the use of constraint option in Prompt

Hi all,
what is the use of constraint option in prompt.If which scenario it is useful.
pls give the clear explanation.
Regards
bharath

NB -- I am doing this from memory, but isn't the Constraint (or limits in EAS' HBRs) just a way to reduce member selection scope even beyond security?
I think I have used this once as I generally design apps to rely on Planning member security and not add in an extra layer.
Regards,
Cameron Lackpour

What is the use of hot key...

what is the use of hotkey in elementary search helps...how to use this in elementary search helps...can anybody send any navigations on these ..

Creating Elementary Search Helps
Procedure
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Elementary search help and choose .
The maintenance screen for elementary search helps appears.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the selection method of the search help.
You can enter the name of a table or a view (database view, projection view or help view) here. If you enter a table that has a text table, the name of the text table is automatically entered in the corresponding field.
Using the input help (F4 help), select fields of the selection method as parameter in the Search help parameter area. Select the fields that should be used in the dialog box for value selection or in the hit list.
If the selection method is a table that has a text table, both the fields of the table and the fields of the text table are offered in the input help.
The data element of the parameter is automatically copied from the selection method. The data element defines the output attributes and the F1 help of the parameter in the hit list and in the dialog box for value selection.
You can assign the parameter another data element. To do so, select the Mod flag. The Data element field is now ready for input. Then select a data element with the input help (F4 help). Only data elements whose data type, length and number of decimal places is the same as those of the previous data element can be assigned.
This removes the link between the data element of the search help parameter and the data element of the selection method field having the same name. If you cancel the Mod flag, the data element of the assigned table field is used again.
Define the attributes of the search help parameters.
Select the IMP flag if it is an import parameter. Select the EXP flag if it is an export parameter.
You can define the dialog for the input help with the fields LPos, SPos and SDis. Enter the parameter position in the hit list in LPos. If you enter nothing or the value 0 here, the parameter is not displayed in the hit list.
Enter the parameter position in the dialog box for value selection in SPos. If you enter nothing or the value 0 here, the parameter is not displayed in the dialog box for value selection.
Set the SDis flag if the parameter should be a pure display field in the dialog box for value selection. The user is thus informed that the contents of the parameter restrict the value, but he cannot change this restriction. This makes sense for example when the parameter is an import parameter or if it has a default value.
You can assign the parameter a default value in the Default value field.
Select the dialog type of the search help.
The dialog type defines how the hit list is displayed in the input help.
Save your entries.
A dialog box appears in which you have to assign the search help a development class.
Choose .
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
Result
The search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred during activation, the activation log is automatically displayed.
Other Options
Assign a hot key: If the search help is to be accessed with a hot key, you must enter a one-place ID in the Hot key field. All the elementary search helps contained in a collective search help should have different short cuts.
Assign a search help exit: In exceptions, you might have to change the standard flow defined by the search help with a search help exit. In this case enter the name of the search help exit in the corresponding field.
Test the search help: You can test the flow of an input help defined by the elementary search help with . A dialog box appears in which you can simulate the behavior of the search help under different conditions. You can obtain information about the options provided in this window with .
See also:
Example for Search Helps
Each customer of a carrier (see Flight Model) or of a travel agency has a customer number. You want to find a search option for this customer number.
The user must be offered two different search paths.
The user should be able to search for the customer number using the customer data, such as the name and address.
The user should be able to search for the customer number using existing customer bookings.
You can provide the required search option by creating a collective search help SCUSTOM. Two elementary search helps SCUSTOM_NAME (for searching with the customer data) and SCUSTOM_BOOK (for searching with the existing bookings) are created for the actual search paths. These elementary search helps are included in the collective search help.
Elementary Search Help SCUSTOM_NAME
This elementary search help should enable you to search for the customer number using the name and address (street, city, country). All this data is contained in table SCUSTOM. Table SCUSTOM must therefore be selected as the selection method of the elementary search help.
You now have to decide which fields of the selection method are needed for the input help process. These are the fields that should appear either in the dialog box for restricting values or in the hit list.
In the dialog box for restricting values, the user should be able to restrict values with the customers name and address, i.e. the fields for the street, city and country. These fields as well as the customers number (the information to be found must always be in the hit list) should appear in the hit list. The fields ID, NAME, STREET, CITY and COUNTRY of table SCUSTOM must be included in the search help as parameters.
The parameter ID is declared to be an import parameter. A pattern entered in the corresponding field of a screen template can therefore be used directly for the value selection. Restrictions for the other parameters of the search help must be entered in the dialog box for value selection.
All the parameters of the search help are declared to be export parameters. As a result, all the parameters of the hit list can be returned to the screen template if the corresponding fields are available there.
Elementary Search Help SCUSTOM_BOOK
This elementary search help should enable you to search for the customer number using existing customer bookings. The flight data for the booking (flight number, date of flight, city of departure, city of arrival) and the name of the customer should be used for the search here. This data is distributed on the tables SBOOK (bookings), SCUSTOM (name) and SPFLI (cities of departure and arrival). The following graphic shows the relationship between the relevant tables, that is the existing foreign key relationships.
In this case a database view SCUS_BOOK must be created on these three tables (see Example for Views) as selection method. The tables in the view (join) are linked as defined by the existing foreign key relationships (see Foreign Key Relationship and Join Condition).
In the dialog box for restricting values, the user should be able to restrict the search for booking data with the carrier ID, customer name, city of departure and city of arrival The flight date and of course the customer number should also be displayed in the hit list. Fields CARRID, FLDATE, CUSTOMID, NAME, CITYFROM and CITYTO of view SCUS_BOOK must be included in the elementary search help as parameters of the search help.
The parameter CUSTOMID is declared to be an import parameter. All the parameters of the search help are export parameters.
Collective Search Help SCUSTOM
The two elementary search helps are now included in the collective search help. You must now allocate the parameters of the elementary search helps to the parameters of the collective search help.
The parameter ID of the collective search help is marked as an import parameter. All the parameters are export parameters. The values can thus be copied from the hit list to the screen template.
Attaching the Search Help
In order to be able to use the search help SCUSTOM in screen templates, the attachment of the search help (see Attaching Search Helps with Screen Fields) must be defined.
Attaching to the Check Table SCUSTOM
The search help should be available for all the fields that are checked against table SCUSTOM. The search help therefore must be attached to table SCUSTOM. The search help parameters must therefore be assigned to the key fields of table SCUSTOM.
The parameter ID of search help SCUSTOM is here assigned to the field ID of table SCUSTOM in this field assignment. No assignment is possible for all other parameters of the search help (NAME, CITY and COUNTRY) since table SCUSTOM does not contain this information as key fields.
Attaching to a Field of Table SCUSTOM
In order that the search help is available when the field SCUSTOM-ID is directly copied to the input template, you have to attach the search help to this field.
With this type of attachment, all the parameters of the search help can be assigned to the corresponding fields of the table.
Structure of an Elementary Search Help
An elementary search help defines the standard flow of an input help. You can define the following components of this flow in the search help:
where does the data displayed in the hit list come from (selection method)
what information should be displayed in the dialog box for value selection and in the hit list (search help parameters)
what field contents can be taken into account for hit list selections and which values in the hit list can be returned to the screen fields (search help parameters)
what dialog steps should be executed in the input help (dialog behavior)
Selection Method
The possible input values displayed for a field in the hit list are determined at runtime by database selection.
If all the data required in the hit list comes from one single table, you only have to select this table (or a projection view on this table) as selection method. If there is a text table for the table, its fields are also available in the input help. A table entry is linked with the corresponding text by the existing foreign key.
If the data needed in the hit list comes from more than one table, you must link these tables with a view (database view or help view). This view must be defined as the selection method.
If the underlying tables are client-specific, the client field must be contained in the view. Otherwise selection for the input help would be for all clients.
Search Help Parameters
A search help has an interface consisting of parameters. These parameters define the fields of the selection method that should be used in the input help.
A parameter of the search help must correspond to each field in the dialog box for value selection and to each field of the hit list. The parameters are copied from the corresponding selection method, that is they always have the same name as the corresponding field of the selection method.
If the search is restricted with a parameter of the search help, this is used in the data selection for formulating a WHERE condition for the field of the selection method with the same name. Vice versa, the parameters of the search help are assigned the contents of the fields of the selection method having the same name.
The search help should not contain any parameters for the clients. In the input help, selection is automatically in the logon client of the user.
A data element must be assigned to each search help parameter, that is a type is always defined for the search help parameters.
A search help can contain further parameters that do not correspond to any field of the selection method. This is normally only necessary if the standard flow of the input help described by the search help still has to be modified by with a search help exit.
Import and Export Parameters
When an input help is called, the entries that the user already made in the input template are taken into consideration. For example, if a user calls the input help for the flight number and already specified the carrier, of course only the numbers of flights of this carrier should be offered.
On the other hand, if the user selects one row of the hit list, more than one field of the input template might have to be filled with data from the selected row of the hit list. For example, if the flight number is obtained from the hit list, the city of departure and the destination should also be returned in the screen template.
The interface of a search help defines the context data that can be used in the input help and the data that can be returned in the input template.
A parameter of a search help can be classified as:
Import parameters: Parameters with which context information from the processed input template (screen) may be copied to the help process.
Export parameters: Parameters with which values from the hit list may be returned to the input template.
A parameter can simultaneously be an input and an export parameter. A search help can also contain parameters that are neither import nor export parameters. Such parameters could be required for the internal input help process, for example.
When you attach a search help, you must define where the import parameters of the search help get their values from and the fields in which the contents of the export parameters are returned. See also Value Transport for Input Helps.
Description of the Online Behavior
The online behavior defines the steps executed in the input help process and the structure of the hit list and dialog box for value selection.
The dialog type defines whether or not the dialog box for value selection should be displayed. If you want to skip the dialog box for value selection, the hit list is displayed directly after calling the input help.
When you define an elementary search help, you can define how the dialog box for value selection and the hit list should look. For example, you can define the position of a parameter in the dialog box for value selection here. The column position in which the values of a parameter are displayed in the hit list can also be defined here
Please reward points..
regards

What's the purpose of copying the projects?

I use Enterprise PeopleTools 8.49 Installation for Oracle for a guide to install the peoplesoft. When I did the step of Updating Database to Latest PeopleTools Release of Chapter 7B, I found that it told me to copy the project to the database but no to tell me to build it. Without building the project, the objects of the project can not be built. Should I need to build the project? What’s the purpose of copying the projects?

I'm afraid, you were starting to speak about Peopletools installation tasks, which come with its own particularities, now you're speaking about maintenance packs which come with other particularities.
Honestly, I didn't read the MP6ML installation guide, and if you need to build the project or not, I do not know, and if you need, I don't know the options neither.
But I'm sure, because I did it several times by the past for other MPs, everything was well explained in the doc and/or template, including the exact options you need to set before building the project.
For MP application, PSCA should be used as most as possible, if not possible, then manuals steps are described in the templates. If not, then open a case to Peoplesoft support.
...the second one just told me to copy the projects named HC9_MP6_ML_1_CP and HC9_MP6_ML_2_CP from file to my target database. So should I build the projects? And which options should I choose when I build the projects?If the template describe only a manual copy project (without build), then copy and do not build the project.
Nicolas.

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

What is the use of 'ALTER DATABASE CLOSE'?

Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.

If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC

What is the use of access level

Hi Experts,
What is the access level and what is use of each option in access level
1 Application
2 Superior component
3. Top Component
4. Sap
5. Global
and in Details section what is the use Properties tab
1. Application Component
2. Software Component
3. Development Package
4. Settings Class
Please explain Each option use.
Thank you in advance,
Srini M.

Hi Srini,
just read the documentation (although the current status on SAP Help Portal isn't really up-to-date):
1. [Entry point|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm]
2. [Setting an Access Level|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/32/6aba9c49fd41a5a14f710e121220f1/content.htm]
W/r to "Application Component" etc., docu on Help Portal is definitely not sufficient. Here, the following applies:
An application offers attributes for the application component and the software component. The application component and software component have to be the same as defined for the development package. Application and software component are automatically derived from the development package if they are not set explicitly.
For the definition of the development package, application component, and software component, we recommend that you choose the same values that are in effect for the software solution that you want to enhance by a new BRFplus application. This simplifies all activities related to the software infrastructure, especially transports.
CU
Claus

What is the use of Storage loc.ref.in LE-WM Interface to Inventory Managemt

Hi Guys
What is the use of below fields
Special movement indicator for warehouse management and Storage loc. ref.
In the WM configaration LE-WM Interface to Inventory Management
How we can do the below scenario with this configaration
I have 3 scenarios all scenarios have MIGO and placing stock to WM
2 scenarios requres Immediate TO creation after MIGO 101 mvt type
But last scenario does not want Immediate TO ,it is having another Z transaction to create TO
But problem is for the last scenario also creating Immdiate TO after MIGI 101
How to avoid this Immdiate TO for this scenario
And How to allow it for first 2 scenarios
How we can to with that configaration

Hello ,
It is not possible directly in customising as all three cases are using the same Mvt Type.
Alternate Solution :
You may try an by creating a new Mvt Type 901 i.e making a copy of 101.
Thereafter try to link a new Ref Mvt Type to the same .You should use this case for the third scenario.
This may resolve your problem.
Regards
Ramesh Ch

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

What is the use of TCode: OOSE

Hi,
Can i know what is the use of TCode: OOSE
Where i can see a list of entries, let me know what is the use of these option.
When we would be using it.
Regards
Rajesh

Hi Rafiqh,
Thanks for your quick response.
What do you mean by switch, if you can provide me with some example it would be gr8.
Appreciate your early response.
Regards
Rajesh

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

Similar Messages

Maybe you are looking for