What is the use of Data packet dim with Virtual cube with services

Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhari

Hi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

Similar Messages

I cannot find all my installed apps on the "use cellular data for" tab on the settings menu.

I have a new iphone 5s and on the first day I've received it, I updated to IOS 8.0.2.
Today, I've decided to turn my cellular data on and, in order to consume less data, I thought I would disable some of the apps. However, only a few were available/visible on the "use cellular data for" tab. However, when, with the cellular data turned on, I opened a missing app on the phone, it would start to appear on the list (where it wasn't previously). Also, when I go to the app on the settings menu, it would not have shown the option, "use cellular data" before I've opened the app and now it does. Do I need to turn on every single app before I can select my cellular data preferences? I know people with the same phone and their apps appear all, as expected.
I don't know if this is a problem of my own carrier but I don't think so, because the people I mentioned earlier have the same carrier.
Any help would be appreciated.
Thank you.

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

What happens if I switch off the "Use Cellular Data for Facetime"?

So I got a notice saying that my phone's storage was almost full which makes no sense to me because I barely have about 300 pictures on my phone, barely any apps, but I do have music. I have mail turned OFF, and I am always on WIFI. I don't know how this is a problem.
So what would happen if I pressed the switch off button for the "Use Cellular Data for: facetime"?
I use facetime A LOT with my friends WHILE ON WIFI but if this is causing my storage to go so full, I will do it.
Please heLP!

Using cellular data has nothing to do with the storage capacity on your phone. By turning it off you will only be able to FaceTime when your connected to wifi, thus saving you on your data plan if you do not have unlimited data from your carrier.
You can go to settings > usage to view what is filling up the capacity of your phone. You should import and back up your pictures to your computer following the directions here http://support.apple.com/kb/HT4083

What are the uses of diffrent concepts in data warehousing

What are the uses of diffrent concepts in data warehousing? Why?
naveen

Hi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T

What is the use of inverted date format

In table TCURR - Exchange rates, the field GDATU - Date As of Which the Exchange Rate Is Effective is stored as an inverted date. So 01/01/2008 is actually stored as 79919898.
What is the use of inverted dates. Why does SAP use them. Why not just use normal date format? If I want the latest record from the table, instead of sorting by descending, I actually have to sort by ascending because the date is stored in inverted format.

Hi,
Inverted date is a old concept which helps in soring the dates sometimes. but now ASCENDING and DESCENDING sorting is more easy and quick. Check this application help. maybe useful for you
1. CONVERT DATE f1 INTO INVERTED-DATE f2.
2. CONVERT INVERTED-DATE f1 INTO DATE f2.
Effect
Calculates the nine's complement of the internal date format (YYYYMMDD - for more information about internal display, meaning and initial values of types, see TYPES) and places it in the field f2. For example, 19950511 becomes 80049488 and 80049488 becomes 19950511.
In the inverse date format, the most recent date has the numerically smallest value. You can make use of this effect when sorting dates.
Note
The technique of manipulating the sort sequence of dates by inverting the internal date format is now rarely used. You can sort internal tables in order of ascending or descending date values much more efficiently using the ... ASCENDING or ... DESCENDING additions to the SORT statement.
Example
DATA DATE_INV LIKE SY-DATUM.
CONVERT DATE SY-DATUM INTO INVERTED-DATE DATE_INV.
Suppose, for example, SY-DATUM contains the date 11.05.1995 in its internal format 19950511. After execution of the CONVERT statement, DATE_INV would contain the internal format 80049488.
//Kothand

What is the use of change pointer concept in ale?

what is the use of change pointer concept in ale?
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 5:10 PM

ALE Architecture:
It consists of an Outbound process, an Inbound process, and an Exception Handling process.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
Over view of IDocs:
IDoc is a container that is used to exchange data between any two processes. The document represented in an IDoc is independent of the complex structure SAP uses to store application data. This type of flexibility enables SAP to rearrange its internal structure without affecting the existing interface.
IDoc interface represents an IDoc Type or IDoc data. IDoc Type represents IDocs definition and IDoc Data is an instance of the IDoc Type.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programs design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocs packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Creation of IDoc:
Basic Type:
Basic IDoc type defines the structure and format of the business document that is to be exchanged between two systems.
Segments:
Segments form the basic building blocks of an IDoc type and are used to store the actual datta. A segment type is the name of a segment and is independent of the SAP elease. A segment definition is the release-specific name of a segment.
Steps in creating Segments:
T.Code WE31
Enter the name for your segment type and click on the create icon.
Type the Short text.
Enter the variable names and data elements.
Save and Go back.
Go to Edit -> Set Release.
Repeat the steps to create more segments.
IDOC TYPE:
Business data is exchanged with an external system using the IDoc Interface.
IDoc types (Special Structures) An IDoc type is defined through its permitted segments. Segments can be dependent on each other (parent and child segments). The IDoc interface can check for each IDoc whether thhe segments contained are compatible with thhe definitiion of its type. This systax check is activated or deactivated in the Partner Profiles.
Steps in creating IDoc Type:
T.Code WE30 to create IDoc Type.
Enter the Object Name, Select Basic Type and click Create Icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDoc name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press enter
The system transfers the name of the segment type to the IDoc editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation.
Save it and go back.
Go to Edit -> Set Release.
Message Type:
Steps in Creating Message Type:
T.Code WE81.
change the details from Display mode to Change mode
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
Assign Message Type to IDoc Type:
T.Code WE82
Change the details from Display mode to change mode.
After selection, the system will give this message "The table is cross client (See help for further info)". Press enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 5:10 PM

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

What is the use of 'ALTER DATABASE CLOSE'?

Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.

If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC

What is the use of end routine in bi 7.0

hi friends,
what is the use of end routine in bi 7.0. what scenerio we use end routine.
Thanking u
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine
An end routine is a routine with a table in the target structure format as input and output parameters. You can use an end routine to postprocess data after transformation on a package-by-package basis. For example, you can delete records that are not to be updated, or perform data checks.
If the target of the transformation is a DataStore object, key figures are updated by default with the aggregation behavior Overwrite (MOVE). You have to use a dummy rule to override this.
hope this helps.

What is the use of access level

Hi Experts,
What is the access level and what is use of each option in access level
1 Application
2 Superior component
3. Top Component
4. Sap
5. Global
and in Details section what is the use Properties tab
1. Application Component
2. Software Component
3. Development Package
4. Settings Class
Please explain Each option use.
Thank you in advance,
Srini M.

Hi Srini,
just read the documentation (although the current status on SAP Help Portal isn't really up-to-date):
1. [Entry point|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm]
2. [Setting an Access Level|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/32/6aba9c49fd41a5a14f710e121220f1/content.htm]
W/r to "Application Component" etc., docu on Help Portal is definitely not sufficient. Here, the following applies:
An application offers attributes for the application component and the software component. The application component and software component have to be the same as defined for the development package. Application and software component are automatically derived from the development package if they are not set explicitly.
For the definition of the development package, application component, and software component, we recommend that you choose the same values that are in effect for the software solution that you want to enhance by a new BRFplus application. This simplifies all activities related to the software infrastructure, especially transports.
CU
Claus

What are the uses of portal

Hi,
Iam new to Enterprise portal.
Can anybody tel me what are the uses of portal
correct me if iam wrong " EP can be used from anywhere where the internet conncetion is available and anybody who is authorised to view the content"
Thanks in advance
SAI

Hi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T

What is the use of initial value in a database table?

Hi can anyone help me in knowing what is the use of initial value which is present besides primary key while creating a table?

Initial Value:
Indicator that NOT NULL is forced for this field
Use
Select this flag if a field to be inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field.
Please note that fields in the database for which the this flag is not set can also be filled with initial values.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.
Restrictions and notes:
The initial value cannot be set for fields of data types LCHR, LRAW, and RAW. If the field length is greater than 32, the initial flag cannot be set for fields of data type NUMC.
If a new field is inserted in the table and the initial flag is set, the complete table is scanned on activation and an UPDATE is made to the new field. This can be very time-consuming.
If the initial flag is set for an included structure, this means that the attributes from the structure are transferred. That is, exactly those fields which are marked as initial in the definition have this attribute in the table as well.
hope it helps,
Saipriya

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

What is the use of delta in BW side when we have delta in R/3

Hi,
what is the use of delta in BW side when we are already using delta in R/3 side?
Like,
Generic extraction:-
with different delta extractions (Time stamp, Calendar day, Numeric pointer).
Lo-Cockpit extraction with change log method.
Co/Pa extraction with time stamp method.
So from this delta activation first time full data will be loaded and after that only changed data will be loaded because of these deltas in R/3 side.
So now my question is what is the exact use of delta in BW side with ODS/DSO because data already reached to BW with delta activation right.
Can you please explain me what is the exact use of BW delta?
Thanks in advance.
Points to be added.
Regards,
Shyam.

The purpose of Delta Queue is same in R/3 and BW.
In BW, Delta Queue is used to capture changes made to objects within BW. (for Eg: BW Statastics)or Update data from one BW system to another BW system (if you have multiple BW systems).
Message was edited by:
Praveen Vujjini

What is the use of Data packet dim with Virtual cube with services

Similar Messages

Maybe you are looking for