What is the use of embedding Xcelsius Swf file in to Crysatl report?

Hi all,
I read some documents related to this integration, but still am in a confusion about the final purpose.
Can any of you answer my question patiently?
1.Is the embedded SWF acts just like a static object (just like a SWF)?
2.If, I embed a swf file in CR 2008, Will both have any interactivity between those two?
I mean, if I change the source data for CR , will the data SWF be changed? (If I have same columns like Country, Sales)
3.How the interactivity will work..? From SWF to Crystal data OR Crystal data to SWF (as I asked above).
4.I read BO doc with an example, but its not clear up to my doubts.
It would be thank full if any of you spend your time for a clear description.
Thank you,
Krishna Pingali
Dell India.

Hi Mathew,
The Convert to Formula in Excel Allows you to Convert you Embedded Bex Query into API Calls. This enables you to Better Format the Excel Output by allowing you to move your Cells Around.
This helps because when you refresh you Query all the Changes you make will be maintained.
[More Info on Working with Formula|http://help.sap.com/saphelp_nw70/helpdata/EN/d3/015369f54f4a0ca19b28c1b45acf00/content.htm]
Hope this Helps
Datta.

Similar Messages

What is the code to load a .swf file in AS3 on the same layer?

I'm new to AS3 and am trying to figure out the code for loading a .swf file on the same layer of the same page, thereby replacing all of the information. I don't want to put it on layer 2, etc. Another easy thing I can do in AS2 but am struggling with in AS3.
thanks!
Steve

There are no 'layers' in AS3 - there is just the display list. You can use addChildAt to add things at a specific depth - thereby placing it behind or above something, but if you just use addChild it goes on top of whatever is currently there...
Anyway - to answer your question, you can load a .swf with a Loader object like so:
var l:Loader = new Loader();
l.load(new URLRequest("myFile.swf"));
addChild(l);
You can wait for complete like was shown, but you don't have to. And this will not 'replace' anything - it just loads myFile.swf on top of anything currently being shown. If you want to 'replace' what's there you need to remove it first:
while(numChildren){
removeChildAt(0);

What is the maximum size of a .swf flash file that can be created for DMM

Please help,
I am running DMM 5.2.1 and was wondering what is the maximum size of a .swf file that can be created and play SMOOTHLY on the screens (screen dimension 1366 x 768px).
Kind regards.

Hi Nicholas,
You can refer to the content creation best practices documented at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmd/best/practices/guidelines.html#wp1168116
As you can read there:
- if the SWF file size is greater than 500KB, you may start to see high memory consumption on the DMP.
- regarding resolutions, the SWF can be up to 1920 x 1080 when animations within the SWF are small and are restricted to a 640x480 region.
Regards,
Marco

What is the use of ST05 ? and how to use " ST05 "

can anybody tell me what is the use of " ST05 "
and how can we handle it.

SQL Trace
SQL trace(ST05) provides the developer with the ability to analyse database select statements. Simply execute ST05
to turn on SQL trace, then execute the statement/program you want to analyse. Now turn off SQL trace using ST05
and click on list trace to view the details.
You can also perform traces on other items such as authorisation objects.
Authorisation trace analysis 1. Open two sessions
2. Execute transaction ST01 in one of the sessions
3. Select the authorisation checkbox, note the other traces
you can perform (SQL, RFC, Table Buffer etc)
4. Click the 'Trace On' button
5. Within your other session execte the transaction/report
you want to trace or get the user in question to do it
6. Return to the session where you turned the trace on and
click on 'Trace Off' otherwise it will continue to record
all athorisation checks
7. Click on the 'Analysis' button
8. Enter appropriate data into selection screen such as
Username, type of trace records (i.e. Authorization check)
9. Click on the Execute button.
10. Report displaying trace results will now be displayed
http://www.sapdevelopment.co.uk/perform/perform_sqltrace.htm
Some useful transaction related to this are ..
ST01 SAP system trace
ST02 Buffer statistics.
ST03 Workload analysis.
ST04 Database performance analysis.
ST05 SQL trace .
ST06 Operating system monitor ...
From the recorded SQL trace you can deduce:
· Which SQL statements your application carries out
· Which values the system uses for specific database accesses and changes
· How the system translates ABAP OPEN SQL commands (such as
SELECT) into standard SQL commands
· Where your application positions COMMIT statements
· Where your application makes repeated database accesses
· What database accesses or changes occur in the update section of your
application
Look at the below links, you will get the idea
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html
Check the following links:
http://www.sapbrainsonline.com/TOOLS/RUNTIMEanalysis/SAP_runtime_analysis.html
http://www.sapbrainsonline.com/TOOLS/SQLTRACE/SQL_TRACE.html
Use
The Performance Trace allows you to record database access, locking activities, and remote calls of reports and transactions in a trace file and to display the performance log as a list. It also provides extensive support for analyzing individual trace records.
SQL Trace: This allows you to monitor the database access of reports and transactions.
Enqueue Trace: This allows you to monitor the locking system.
RFC Trace: This provides information about Remote Function Calls between instances.
While the trace is switched on, the SQL Trace function records all database activity by a particular user or group of users. The R/3 System takes OPEN SQL statements and converts them in to embedded SQL statements that it passes to the database. It is the embedded SQL statements, their parameters, return codes, and the number of entries retrieved, inserted, or deleted that are recorded in the SQL Trace file. The log file also contains the runtime of the statement and the place in the application program from which it was called.
The SQL trace tells you:
The SQL statements executed by your program.
The values that the system uses for particular database access and changes.
How the system converts ABAP Open SQL statements (such as SELECT) into Standard SQL statements.
Where your application executes COMMITs.
Where your application repeats the same database access.
The database accesses and changes that occur in the update part of your application.
Refer
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/cb632772cd0cd4e10000000a1553f7/frameset.htm
Regards
Vasu

What is the use of this form?

Hi all,
What is the use of this form in include RV61B901?
How does this code send any information to the program calling it? Is Sy-subrc global so that main program will know the reuslts?
Code:
FORM KOBED_901.
DATA : l_anzpk LIKE likp-anzpk.
SELECT SINGLE anzpk FROM likp
                      INTO l_anzpk
                      WHERE vbeln = komkbv2-vbeln.
IF l_anzpk NE 0.
    sy-subrc = 4.
    exit.
ENDIF.
sy-subrc = 0.
ENDFORM.
Thanks,
Charles.

Hello,
This form sets the value of sy-subrc(which is global) based
on the value of l_anzpk.
Regards
Greg Kern

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

What is the use of Serializable Interface in java?

Hello friends,
I have one dout and i want to share with u guys:
Why Serializable interface made and actully
what's the use of it?
At which place it become useful ?
It is not contain any method then why it is made?
If anyone have any idea about this then please reply.
Thanks in advace
Regards,
Jitendra Parekh

t is not contain any method then why it is made?To point out to the user of a class (and the programs) that the design of this class is conforming to certain restraints needed for Serialization.

What is the use of Data packet dim with Virtual cube with services

Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhari

Hi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

What is the use of HTTPS 8181 port

Hi,
I am wondering what is the use of the port 8181 on the EE5 application server.
the second question. Why the application server open so many port on the same local machine. I agree that for security raison it is a good idea. But does application serveur use tcp connection to communicate between the server thread ?
So it is possible to add a thread in the serveur application to process some internal work. And of course it is possible to include this new thread in the communication process of the server ?
Can we have the map of all the tcp trhead use by the server application.
Regards
Herve Terrolle.

Your app has to run as root to listen on ports up to 1024,
also, some other app (apache?) may already be listening on port 443.
AFAICT port 8181 is just arbitrarily chosen, it might as well have been port 4430, or any other free port above 1024.

What is the use of commit work and rollback work

hao friends,
what is the use of commitwork and rollback work where we can use these open sql statements .
thanks,
anji

hi all
i have written the following code in my development system to change the records of my database.
SELECT * FROM zyikostl INTO TABLE itab.
LOOP AT itab INTO wtab.
    tabix = sy-tabix.
    DO.
      READ TABLE itab INTO ktab WITH KEY kostl_alt = wtab-kostl_neu.
      IF sy-subrc = 0.
        wtab-kostl_neu = ktab-kostl_neu.
        MODIFY itab FROM wtab INDEX tabix.
        CONTINUE.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
ENDLOOP.
MODIFY zyikostl FROM TABLE itab.
In the development system i have only few records its working fine,but when it is been moved to test system there are 2500 records in the database so the report is taking much time(more than 5 hours )
i sthere any solution for this ....
thanks,
vaasu.

What is the use of 'ALTER DATABASE CLOSE'?

Hello Everybody,
SQL*Plus: Release 10.1.0.2.0 - Production on Ma Aug 15 21:28:30 2005
Copyright © 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn / as sysdba
Connected.
SQL> startup force
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145750508 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> select status from v$instance;
STATUS
OPEN
SQL> alter database close;
Database altered.
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16196: database has been previously opened and closed
If i have to shutdown the instance and database then
WHAT IS THE USE OF 'ALTER DATABASE CLOSE' ?
I need explanation. Why should i shutdown?
Dont give me this answer.
ORA-16196: database has been previously opened and closed
Cause: The instance has already opened and closed the database, which is allowed only once in its lifetime.
Action: Shut down the instance.

If you read the documentation you will see that there is no ALTER DATABASE CLOSE command.
This is an undocumented Oracle command, which we are not supposed to use. Consequently we are not allowed to complain about the way that it works. Instead we're supposed to use SHUTDOWN IMMEDIATE.
Cheers, APC

What is the use of end routine in bi 7.0

hi friends,
what is the use of end routine in bi 7.0. what scenerio we use end routine.
Thanking u
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine
An end routine is a routine with a table in the target structure format as input and output parameters. You can use an end routine to postprocess data after transformation on a package-by-package basis. For example, you can delete records that are not to be updated, or perform data checks.
If the target of the transformation is a DataStore object, key figures are updated by default with the aggregation behavior Overwrite (MOVE). You have to use a dummy rule to override this.
hope this helps.

What is the uses of this programe(accelerometer)?

what is the uses of this programe(accelerometer) in N95 original or N95 8g and from where I can get it?

This is Rotateme, but needs to be signed.
http://www.bysamir.fr/rotateme/
This is the movingball which just needs to be installed (doesn't require signing).
http://research.nokia.com/files/MovingBall_Example.sisx
Nokia N95
V 20.0.015
0546553

What is the use of embedding Xcelsius Swf file in to Crysatl report?

Similar Messages

Maybe you are looking for