What is the use of Return indicator in Service entry sheets

Hi,
I would like to know the use of Return Indicator ?, and When actually we can use this. Please advise.
Thanks
Udaya

Hi
The Return Active indicator enables you to specify that a return is possible when time sheets are converted into external services (i.e. incorporated in service entry sheets).
If you have selected the activation indicator for the return, you can retrospectively change a time or quantity in a time sheet that you have already incorporated in a service entry sheet. As soon as you convert this changed time sheet into external services, the system generates generates both a service entry sheet with the new data and a return document cancelling the original data. The system sets the Return Indicator in this document.
Where you can use this Indicator
In a time sheet for which you have already created a service entry sheet you subsequently change a specified time or quantity and reconvert the time sheet into an entry sheet for externally performed services. The system then creates both an entry sheet with the new data and an entry sheet in which the original data is cancelled and the returns indicator is selected.
The return indicator cannot be selected manually, but is set only by the system after the conversion of a changed time sheet into external services.
To facilitate the return of time sheets during the service entry process, you must select the relevant Activation Indicator in Customizing for External Services Management.
Source Determination and Default Values -> Specify for Client -> Returns Active.
Regards

Similar Messages

WHAT IS THE USE OF RETURN TABLE IN BW

Hi Gurus,
I would like to know what is the use of return table in bw.. can any one give me the perfect answer....
Ramesh

Hii
Imagine a situation where 1 record coming into a cube needs to be split into multiple records. Lets say you get values total values for sector in the PSA. Now you may want to partition that value based on the various sectors existing. In that case you can use a return table and split a single record into multiple records.
return table option is available in update rules
go thru these links
Return table
Return table
Message was edited by:
Sheeba Bhaskaran

How to set deletion indicator to SERVICE ENTRY SHEET

Dear Experts,
Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service entry sheet.
Also explain Procedural steps to set deletion indicator to service entry sheet.
Thanks in Advance

Dear,
First of all Revoke Acceptacne as
Entry Sheet --> Set Status --> Revoke Acceptance .
After that you can delete....but no Invoice must be exist.

What is the use of ABC indicator in functional location segment.

Hi Expert,
I want to know about ABC indicator in functional location segement actually, what is the use of indicators in master data?
Regards,
Ram Rathode

Hi,
As per Application help, ABC indicator signifies:
An indicator that is assigned by the procedure of ABC analysis.
The following ABC indicators are possible:
A - Important
B - Less important
C - Relatively unimportant
According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
Examples of use for ABC indicators are vendor master records, material master records, and master records of technical objects.
You can customize the values in ABC indicator as per your requirement
Thanks

Can anyone help me what is the use of business and proxy service in osb?

Hi,
I am new in Osb what is the use of business service and proxy service in osb.
I know little bit proxy service is used for actual message flow. I saw some project proxy service invoking the (using service callout,routing and publish) service,but the wsdl of the services of the proxy and business service is same.
Please can anyone explain the flow while executing through soapUI?(that means it will hit 1st business services or proxy service)
I have this project structure
business service
1.reference.biz----> this is the wsdl of ex:reference.wsdl
2.external.biz----> this is the wsdl of ex:external.wsdl
proxy service
1.referece.proxy--->this is the wsdl of ex:reference.wsdl(in this proxy we are routing to reference.biz proxy service both contains same wsdls why?)
xqueries of request and response.
Best Regards,
Raju.
Edited by: 996674 on Apr 2, 2013 10:53 PM

Hi Raju,
Proxy Service - It is the starting point of you OSB application which deal with receiving messages, inducing logic in it like transformation, if-else, replace, java call outs,etc. You can put in your program logic here and then invoke a business service to route it to your Database or to any other queue as per your requirement.
Business Service - It is generally used for routing purposes, like inserting the input in your Database or sending it to a different queue or BPEL process, etc..
Cheers,
Rit

What is the use of factoring indicator in Business partners master data

Hi All,
I am the biginner to SAP B1.please help me.I am creating the businee partners master data in that general tab factioring indicatior is there.what is need for that?

Hi,
Please refer to Note No. [593657|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=593657]
Symptom
What is the factoring indicator?
Other terms
factoring indicator, factoring, indicator, business partner, master
data,
Reason and Prerequisites
Solution
Factoring indicator
The factoring indicator is used in Reporting => Accounting Reports => General Ledger.
If a factoring indicator has been defined for a Business Partner, it
will be entered automatically into each Journal Entry that will be
posted for this BP.
In Reporting => Accounting Reports => General Ledger, you can
click on the "Expanded" pushbutton, check the "Indicator" button, select "From" and "To" and the system will only display the transactions which include the selected indicator.
This field is for the so-called subrogation, which means
demands to BPs are sold to the bank.
Through this field you can allocate an assignment code to
a Business Partner, this code can be used in an accounting reports.
This functionality is only intended for Austria.
Also, following information from the Online Help (F1)
Factoring Indicator
Assign a factoring indicator for the business partner. Note that both code and name are displayed.
This indicator is automatically inserted as default value in the invoice. The factoring indicator may be displayed in the account statements.
Choose to open a Choose From List window displaying the indicators that have been defined. Choose New to define new ones.
The indicator is only displayed after activating the field Indicator in Personal Settings.
Regards,
Jitin
SAP Business One Forum Team

Creating Service Entry Sheet without using Service Master/Service lines

We are invoking the BAPI_EntrySheet_Create to create the service entry sheet. We are currently facing this issue...
1) For assigned PO's, we are getting the PO item and Account assignment information from BAPI_PO_GetDetail. We are using these values to populate the parameters/tables to invoke BAPI_EntrySheet_Create. For population the Entrysheetservices table, we are not using information from Service Master/Service lines but use the information we get from an external system to populate the Service lines(ESLL). We do not provide a Package No/Service information when invoking the BAPI but populate the service lines with short text, quantity, Gross price etc without service information like package no, outline indicator etc. The BAPI creates a service enty sheet successfully(this is without the SES Acceptance indicator not being set) but when we lookup the SES# from ML81n transaction the ESLL details lines are not displayed.
When displaying the SES using transaction ML81N, the header information is displayed correctly but the lines are not displayed. The Header information is correctly populated in ESSR table and detail is also populated in ESLL table. I think the cross reference information is correctly set in ESLH table to pull up the detail when ML81N as it is missing the package/sub pack information.
Your expert advise in resolving this issue is very much appreciate. Please advise.

Hi,
Creating Service entry sheet using bapi BAPI_ENTRYSHEET_CREATE
For creating service entry sheet follow below link and it helps to you.
http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingServiceEntrySheetusing+BAPI
Regards,
Sekhar

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

How to create a service entry sheet based from the PO

how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!

HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran

Creating Service entry sheet using bapi BAPI_ENTRYSHEET_CREATE

Hello Guys,
I am trying to create a service entry sheet for single line item only using bapi BAPI_ENTRYSHEET_CREATE.
its is creating Service entry document but not populating the line item for me (here only one line item for me).
If you guys have sample code (how the poupulate the internal tables) could you please send it across?.
Thanks in Advance..
Steevan

Hi,
Creating Service entry sheet using bapi BAPI_ENTRYSHEET_CREATE
For creating service entry sheet follow below link and it helps to you.
http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingServiceEntrySheetusing+BAPI
Regards,
Sekhar

Commitment item error at the time of Service entry Sheet

Hi experts,
I have created a service PO, in which I have given the GL. Now when I am going to post the service entry sheet, I am changing the GL account. But system is picking the commitment item with reference to the GL earlier provided in PO.
I want to pick the commitment item with reference to the GL I am providing in service entry sheet.
Pl suggest how can I achieve this.
Regards,
Ankit Agarwal

Hi Eli,
Thanx for your response.
But derivation rule is same for all GL. Whether we put GL in PO or in Service entry sheet, system will derive the commitment item from the same single rule.
Regards,
Ankit Agarwal

Gross price of Service entry Sheet more than the value ordered in PO

Hi all!!
I have a PO that were created and changed by the following way:
The user created the PO of service with the quantity = 1 and the price = 50.000,00
Than he made the service entry sheet of this PO and MIRO normally.
As the fields on service tab wasn't blocked, the user changed the quantity to 105.000,00 and the price to 1.
After that, he made 3 services entry sheet to complete 105.000,00 quantities.
With this, the value delivered became bigger than the value ordered in the PO.
if I make a service entry sheet with a quantity of 200.000,00 for example, the message SE363 will be shown to me with a message that the "quantity entered exceeds quantity in purchase order".
I'd like to know if there's a way by customizing of control the price on Service entry sheet based on the value ordered in PO instead of quantity.
Can anybody help me?
Thanks in advance,
Cris

Hi Ajit and Rajesh
Thanks for the response.
The user made a PO with one line with quantity 1 and net price 50.000,00.
In the services tab, he put a sevice with quantitiy 1 and gross price 50.000,00, and than made the service sheet entry, and MIRO.
After this he changed in the services tab the quantity to 105.000,00 and the gross price to 1 (with the objective of making more than one service entry sheet by quantity).
With this, the system let the user make many entries of service allowing the user to make entries os sheet more than the net price that is in the line of PO.
I'd like to know if there's a way configure the system to make a compare between the gross price and the net price when i'm doing the service entry sheet, because now when I change a line of service tab, the system is not considering that other service entry sheet were made.
So that, i'm having the value of ordered bigger than the value delivered.
Nowadays, the block is made by quantity as I said, but i'd like to block by price too.
Sorry about the bad explanation before, I hope that now i explained better.
Thanks
Cris

Entering the scores in service entry sheet for vendor evaluation

Hi
I could not able to enter the scores for vendor evaluation in service entry sheet. How to do it.
With regards
G Narendra kumar

Hi
While defining the Sub Criteria for Service, you have select the Scoring Method as C (Determination from quality rating of service) or D (Determination from timeliness rating of service).Then u can find a tab for Vendor evaluation in Service Entry sheet where you can enter the scores for service.
Regards
Ramakrishna

What is the use of Indicator in defining sales document

HI pls explain what is the use of Indicator in defining sales document

Please go through this thread
[sales document type - field indicator |sales document type - field indicator]
thanks
G. Lakshmipathi

What is the use of additon in up to 1 rows in SELECT statement

Hi All,
         What is the use of up to 1 rows in select statement.
for example
SELECT kostl
      FROM pa0001
      INTO y_lv_kostl UP TO 1 ROWS
      WHERE pernr EQ pernr
      AND endda GE sy-datum.
    ENDSELECT.
I'm unable to get in wat situations we hav to add up to 1 rows
please help me out...
Thanks,
santosh.

Hi,
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s) you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Regards,
Bhaskar

What is the use of Return indicator in Service entry sheets

Similar Messages

Maybe you are looking for