What is the use of specifying an "End Date" when certifying conditionally?

Hi,
When certifying conditionally, it is possible to specify an "End Date".
* What does OIM do with this End Date?
* What happens on specified date?
* Will the entitlement be automatically removed at that date?
Note : Screen view for help.
The steps are:
1. Start any certification
2. Log in as the certifier
3. Open the certification task
4. Now you can certify any item "conditionally" and enter an end date (see screenshots 1, 2 and 3).
http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/managecert.htm#OMADM5063
http://docs.oracle.com/cd/E40329_01/user.1112/e27151/usingcert.htm#OMUSG3891

I had the same thought
wilnesse dericer

Similar Messages

What are the uses of diffrent concepts in data warehousing

What are the uses of diffrent concepts in data warehousing? Why?
naveen

Hi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T

What is the use of delta in BW side when we have delta in R/3

Hi,
what is the use of delta in BW side when we are already using delta in R/3 side?
Like,
Generic extraction:-
with different delta extractions (Time stamp, Calendar day, Numeric pointer).
Lo-Cockpit extraction with change log method.
Co/Pa extraction with time stamp method.
So from this delta activation first time full data will be loaded and after that only changed data will be loaded because of these deltas in R/3 side.
So now my question is what is the exact use of delta in BW side with ODS/DSO because data already reached to BW with delta activation right.
Can you please explain me what is the exact use of BW delta?
Thanks in advance.
Points to be added.
Regards,
Shyam.

The purpose of Delta Queue is same in R/3 and BW.
In BW, Delta Queue is used to capture changes made to objects within BW. (for Eg: BW Statastics)or Update data from one BW system to another BW system (if you have multiple BW systems).
Message was edited by:
Praveen Vujjini

What is the CRM 2007 support start & end date by CRM..?

Hi,
Could any one please let me know when does the Vendor Mainstream Support Begins ,
Vendor Mainstream Support Ends
& Vendor Extended Support Ends for CRM
Thanks in advance.
Regards,
Sanjay.

Sanjay,
For the official answer go to
http://service.sap.com/pam
However CRM 2007 has been GA for last several months(shown as default release 4/18/2008) and mainstream maintenance according to the PAM will end 3/31/2013.
Take care,
Stephen

What is the use of ABC indicator in functional location segment.

Hi Expert,
I want to know about ABC indicator in functional location segement actually, what is the use of indicators in master data?
Regards,
Ram Rathode

Hi,
As per Application help, ABC indicator signifies:
An indicator that is assigned by the procedure of ABC analysis.
The following ABC indicators are possible:
A - Important
B - Less important
C - Relatively unimportant
According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
Examples of use for ABC indicators are vendor master records, material master records, and master records of technical objects.
You can customize the values in ABC indicator as per your requirement
Thanks

What is the use of constructors

what is the use of constructors in abstract class when we cannot instantiate the class

Double posted and answered.
http://forum.java.sun.com/thread.jspa?threadID=740376

What is the use of end routine in bi 7.0

hi friends,
what is the use of end routine in bi 7.0. what scenerio we use end routine.
Thanking u
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
End Routine
An end routine is a routine with a table in the target structure format as input and output parameters. You can use an end routine to postprocess data after transformation on a package-by-package basis. For example, you can delete records that are not to be updated, or perform data checks.
If the target of the transformation is a DataStore object, key figures are updated by default with the aggregation behavior Overwrite (MOVE). You have to use a dummy rule to override this.
hope this helps.

What is the use of "end of selection" event in report

Hi all
As we can display the outputs in the "start-of-selection "using the write statement.
Then what is the use of "end-of-selection" in reports.
Please tell me with some real tiem examples.
God points will be rewarded.
Thanks

Hi,
The END-OF-SELECTION event is triggered in type executable programs once the logical database has finished reading all data and before the list processor is started.
It tells the server that all the database reading is completed and no further reading is going to take place..
For more details go through the following link:
http://help.sap.com/saphelp_me21sp2/helpdata/en/9f/db9aca35c111d1829f0000e829fbfe/content.htm
END-OF-SELECTION is used mostly when you are using Logical data base in your report. It is triggered when all selection get finished from the data base.
You can use write statments in start of selection and end of selection also.
But the one use of end of selection is... if you want to stop the processing of a certain code and directly display some message you can use this.
start-of-selection.
select data..
process data
if no data .
stop.
endif.
write data
end-of-selection.
write : 'No data to display.
Stop command will take the control to end of selection event.
thanks,
mahesh
Message was edited by:
I Can Solve It

What is the use of FOLDER NODE in SMARTFORMS?

what is the use of FOLDER NODE in SMARTFORMS?
please explain.

Hi,
By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Reward all helpfull answers
Regards
Omkar

What is the use of keyword SCAN ABAP-SOURCE

Hello experts,
what is the use of scan abap-source. please explain. what is tokens, statements, levels in that.

Hi
SCAN
This statement is for internal use only.
It cannot be used in application programs.
SCAN ABAP-SOURCE itab1 ...TOKENS INTO itab2
 ...STATEMENTS INTO itab3.
Parts marked with " ..." are interchangeable
Addition 1
... FROM n1
Addition 2
... TO n2
Breaks down the source code table itab1 into tokens not from start to finish, but only from line n1 to line n2.
The additions FROM n1 and TO n2 must, in this order, follow the specification of the source code table itab1.
When using the start specification n1, use the addition WITHOUT TRMAC to ensure that there are no unnecessary database accesses to the table TRMAC.
The end specification n2 is treated as "soft", i.e. a statement that begins on a line <= n2, but ends only on a line > n2, is returned completely.
If the end specification n2 is split in a chain statement, only the split part up to the next comma is returned completely, not the entire chain statement up to the next period.
Negative line specifications are not allowed and result in a runtime error.
A line specification of 0 amounts essentially to no specification.
If n1 number of lines in source code table, the scanner is not called (SY-SUBRC = 2).
If n1 > n2 and n2 > 0, the scanner is not called (SY-SUBRC = 2).

Addition 3
... KEYWORDS FROM itab4
Does not return all statements, only those specified in the key word table itab4.
If the key word table is empty (i.e. it contains 0 lines), all the statements are selected.
The lines of the key word table are treated as a character field.
To select a Native-SQL-statement or a macro definition, you can specify the pseudo key words EXEC_SQL or DEFINE_MACRO. It makes no difference whether the statements EXEC or DEFINE occur as well. Native SQL statements and macro definitions are returned as one statement (of type E or M even if the expansion of a macro definition results in more than one statement.
If the key word table contains a blank line, blank statements are also selected.
Addition 4
... LEVELS INTO itab5
Stores details about each edited source code unit (source code table itab1 itself, expanded include-programs, expanded macro definitions) in the level table itab5.
Specification of a level table makes sense only with the addition WITH INCLUDES.
The level table itab5 must have the structure SLEVEL.
The fields of the structure SLEVEL - and consequently the columns of the level table itab5 have the following meaning:
TYPE
Type of source code unit with the following possible values:
P (Program)
D (Internal DEFINE macro)
R (Macro from table TRMAC)
NAME
Name of source code unit (name of include program, macro name)
DEPTH
Current nesting depth of source code unit (>= 1)
LEVEL
Index of superior (i.e. including or calling) source code unit in the level table (>= 1, if DEPTH >= 2, otherwise 0)
STMNT
Index of superior (i.e. including or calling) statement in the statement table (>= 1, if DEPTH >= 2, otherwise 0)
FROM
Index of first statement of source code unit in the statement table (>= 1)
TO
Index of last statement of source code unit in the statement table (>= 1)
If the source code unit contains include programs or macro calls, the line range [ FROM, TO] in the statement table also covers the statements in subordinate source code units.
Addition 5
... STRUCTURES INTO itab6
Details of the construction of the source text table are given in the structure table itab6.
The structure table itab6 must have the structure SSTRUC.
The fields in SSTRUC (which are also the columns of structure table itab6) have the following meanings:
TYPE
Type of the structure with possible values:
P (Beginning of the source code)
R (Subroutine)
M (Macro, EXEC SQL)
I (Loop)
A (Case distinction)
C (Condition in a case distinction)
J (Goto command)
D (Structured declaration)
E (Event)
S (Follow-on from simple structured statement)
STMNT_TYPE
The statement type of the beginning of the structure. The values are listed in the type pool SCAN in structure SCAN_STRUC_STMNT_TYPE.
KEY_START
Flags whether the start of the structure is described semantically ('X' if there is a special statement, otherwise ' ').
KEY_END
Flags whether the end of the structure is described semantically ('X' if there is a special statement, otherwise blank).
STMNT_FROM
Index of the first statement of the structure in the statement table itab3.
STMNT_TO
Index of the last statement of the structure in the statement table itab3.
Index of the first substructure of the structure in structure table itab6.
STRUC_TO
Index of the last substructure of the structure in structure table itab6.
BACK
Index of the structure in the structure table itab6 that contains the structure as a substructure (0 if the structure is the root structure of a structure tree).
Addition 6
... OVERFLOW INTO c1
The addition is only allowed and required if the token table itab2 has the structure STOKEN or STOKEX.
If a token is too large to be stored in the token table in the field STR, it is placed in the overflow area c1. The offset of the token in the overflow area then lies in the token table in the field OFF1.
Addition 7
... WITH ANALYSIS
Breaks down each token t = a+b(c) according to the logic of the RSYN key word >ANALY into its three components a, b and c.
Offset and length of components a, b and c are stored in the fields LEN1, OFF2, LEN2, OFF3, and LEN3 in the token table. (The offset of OFF1 is always 0 and therefore not required.)
If you specify the addition WITH ANALYSIS, the token table itab2 must have the structure STOKESX, so that the fields LEN1, OFF2, LEN2, OFF3 and LEN3 are available.
If the token table has the structure STOKEX, you must consider the following:
If the whole token exists in the token table, the offset specifications are relative to the token start. If the token is in the overflow area c1, the offset specifications are relative to the start of the overflow area.
Addition 8
... WITH COMMENTS
Returns comments also, with each individual comment representing a token. The system additionally stores entries for each full block of comments in the table itab3, differentiating between comments that occur within statements and those that occur at program level. In itab3, an entry for a comment within a statement always comes before the statement containing the comment.
Example
Look at the following program fragment. The preceding numbers are the indexes of the tokens.
1 * An example *
2 * with scattered comments
6 MOVE
3 * Inserted comment 1
7 X
4 * Inserted comment 2
8 TO
9 Y
5 * Inserted comment 3
SCAN then enters the following values for the components TYPE, FROM and TO (in this order from left to right) into itab3.
'P' 1 2
'S' 3 5
'K' 6 9
If the addition ... WITH COMMENTS is used, the table itab2 must have the line type STOKES or STOKESX.
Addition 9
... WITH INCLUDES
Also breaks down subordinate source code units (included programs, called macros) into tokens.
You should normally combine the addition WITH INCLUDES with the addition LEVELS INTO itab5.
If (at least) one included program does not exist, SY-SUBRC is set to 1 and the relevant INCLUDE statement is flagged in the statement table itab3 by the statement type J (instead of I), but the breakdown process continues. The level table itab5 contains no entry for include-programs that do not exist.
If you combine WITH INCLUDES with WITHOUT TRMAC , TRMAC-Macros are not expanded because the system does not recognize them as subordinate source code units.
When macro calls are expanded, no position specifications are available. The corresponding fields in the token table itab2 and the statement table itab3 are then set to 0.
Addition 10
... WITH TYPE-POOLS
This addition has the same effect as the WITH INCLUDES addition, except that with the former include programs belonging to type groups are broken down into tokens.
Addition 11
.. WITH LIST TOKENIZATION
Tokens of the form (a1, a2, a3) are not returned as tokens but broken down into the elementary components.
Addition 12
... WITHOUT TRMAC
If a statement begins neither with an ABAP/4 key word nor with a DEFINE macro, the system does not check whether this is a TRMAC macro, but assumes an unknown statement. (Unknown statements are flagged in the statement table itab3 with a U in the field TYPE.)
To avoid unnecessary database accesses to the table TRMAC, you should use the addition WITHOUT TRMAC whenever you assume that the source code to be scanned contains unknown statements. Unknown statements are particularly likely to occur if you use the addition FROM n1, because the scanner does not start at the beginning of the source code, but from a specified point.
If you use WITHOUT TRMAC with WITH INCLUDES, TRMAC macros are not expanded because the system does not recognize them as subordinate source code units.
Addition 13
... PROGRAM FROM c2
Addition 14
... INCLUDE INTO c3
Addition 15
... MESSAGE INTO c4
Addition 16
... WORD INTO c5
Addition 17
... LINE INTO n3
Addition 18
... OFFSET INTO n4
The above additions have the same meaning as those for the
SYNTAX-CHECK: statement: c2 is an input field for a program name to be assigned to the source code, while the fields c3, c4, c5, n3 and n4 are output fields in case an error occurs.
To be able to analyze errors without modifying programs, use the additions INCLUDE, MESSAGE, WORD, LINE and OFFSET. These provide information about the errors which have occurred.
Variant 2
SCAN AND CHECK ABAP-SOURCE itab1 ...RESULT INTO itab2.
Parts marked with " ..." are interchangeable
Extras:
1. ... PROGRAM FROM c1 2. ... INCLUDE INTO c2
3. ... MESSAGE INTO c3
4. ... WORD INTO c4
5. ... LINE INTO n1
6. ... OFFSET INTO n2
The syntax of the program in table itab1 is checked. During the check, all of the information from the program, such as statement structures, statements, tokens, data objects, types and do on are placed into the result field. This field must have the type SYSCH_RESULT, which is defined in type group SYSCH. You must therefore declare type group SYSCH in your ABAP-program using a TYPE-POOLS statement.
&ABAP_ADDITION _1&
... PROGRAM FROM c1
&ABAP_ADDITION _2&
... INCLUDE INTO c1
&ABAP_ADDITION _3&
... MESSAGE INTO c3
&ABAP_ADDITION _4&
... WORD INTO c4
&ABAP_ADDITION _5&
... LINE INTO n1
&ABAP_ADDITION _6&
... OFFSET INTO n2
The above additions have the same effect as the corresponding additions in the statement SYNTAX-CHECK: c1 is an input field for a program name to be assigned to the source code, the fields c2, c3, c4, n1 and n2 are output fields, used when errors occur.
To enable you to analyze errors without having to modify the program, you should specify the INCLUDE, MESSAGE, WORD, LINE and OFFSET additions for the information about the error that occurred.
Reward if usefull

What is the use of creating proxy services using WSDL.

Hi
Am a beginner in ALSB and i have a basic question. Business services are created using WSDL,thats sounds logical as we need to invoke the actual backend services .
Proxy services are connected to business services and what is the need that it can be e created using WSDL.
What is the use of creating proxy services using WSDL.

Hi,
I beleive you are confused because of the apparent inclusion of transport information in WSDL (that is the host:port/endpoint where the service is hosted). However, if you refer to the w3c specification of WSDL1.0 ([url http://www.w3.org/TR/wsdl]www.w3.org/TR/wsdl), you will find that WSDL has three separate sections:
1. The schema information that describes data element(s): specified in types
2. The message information ie message and port sections that specify the parameters and the operations
3. The service section that specify the actual protocol and endpoint binding.
Ideally, a WSDL can be broken down into these three separate components. Any WSDL containing the first two is called an abstract WSDL and is used for a top-down approcah for web services, and if the third part is used, then you get a concrete WSDL, containing invocation end-point also.
Comming back to your question one can typically use an Abstract WSDL for creating proxy service. This way, the service requester and integration can go on two separate threads where the common denominator or agreement between these two parties in terms of operation name and data element are imposed using the WSDL.
Thanks and Regards
Vivek Nandey
BEA Certified Developer for Integration Solutions

What is the use of at new statement?

What is the use of at new statement?

Hi,
AT - itab
Syntax
LOOP AT itab result ...
[AT FIRST.
 ENDAT.]
 [AT NEW comp1.
 ENDAT.
 [AT NEW comp2.
 ENDAT.
 AT END OF comp2.
 ENDAT.]
 AT END OF comp1.
 ENDAT.]
[AT LAST.
ENDAT.]
ENDLOOP.
Extras:
1. ... FIRST
2. ... |{END OF} compi
3. ... LAST
Effect
The statement block of a LOOP loop can contain control structures for control level processing. The respective control statement is AT. The statements AT and ENDAT define statement blocks that are executed at control breaks, that is, when the control structure is changed. The additions to the AT statements determine the control break at which their statement blocks are executed. Within these statement blocks, the statement SUM can be specified to add together the numeric components of a control level. For the output behavior result, the same applies as for LOOP AT.
The prerequisite for control level processing is that the internal table is sorted in exactly the same sequence as the component of its line type - that is, first in accordance with the first component, then in accordance with the second component, and so on. The line structure and the corresponding sorting sequence gives a group structure of the content of the internal table, whose levels can be evaluated using AT statements. The AT- ENDAT control structures must be aligned one after the other, in accordance with the group structure.
The statement blocks within the AT- ENDAT control structures are listed if an appropriate control break is made in the current table line. Statements in the LOOP- ENDLOOP control structure that are not executed within an AT- ENDAT control structure are executed in each pass of the loop.
In order that control level processing is carried out properly, the following rules must be observed:
After LOOP, a restricting condition cond can only be specified if this selects a consecutive line block of the internal table. Otherwise, the behavior of control level processing is undefined.
The internal table cannot be modified within the LOOP loop.
A work area wa specified in the LOOP statement after the addition INTO must be compatible with the line type of the table.
The content of a work area wa specified after the addition INTO in the LOOP statement must not be modified.
If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa.
Addition 1
... FIRST
Effect
The control level is defined by the first line of the internal table. The control break takes place when this line is read.
Note
In the group level AT FIRST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Addition 2
... |{END OF} compi/>
Effect
: Control levels are defined by the beginning or end of a group of lines with the same content in the component compi (where i = 1, 2, and so on) and in the components to the left of compi. The control breaks take place when the content of the component compi or another component to the left of compi changes.
The compi components can be specified as described in Specification of Components, with the limitation that access to object attributes is not possible here.
Note
If the INTO or ASSIGNING additions are used in the LOOP statement, a field symbol can be entered after AT |{END OF} outside classes, to which the corresponding component of the work area wa or the field symbol <fs> is assigned. This form of dynamic component specification is obsolete and has been replaced by specification in the format (name).
Addition 3
... LAST
Effect
: The control level is defined by the last line of the internal table. The control break takes place when this line is read.
Note
In the group level AT LAST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Regards,
Prashant

What is the use of Withholding tax identification number field?

Hello SAP Experts,
I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
As per SAP: Withholding tax identification number
This is a number issued by the tax authorities per withholding tax type.
This number must be specified in Customizing either:
(a) As part of the withholding tax information defined for the company code, or
(b) As part of the withholding tax information defined in the customer or vendor master record.

Hi Pete,
The only thing that I could check is the content used in US:
See content of this field for US:
LFA1-STCD1 Social security number
LFA1-STCD2 Employer identification number
LFBW-WT_WTSTCD Withholding tax identification number for WT Type
In order to populate it, please kindly check the following:
The reason why you cannot fill in the field WT_WTSTCD in transaction
Fk02 however you can do it in XK02 (Change vendor centrally) can be due
to wrong customizing of the field status group.
Kindly check the following:
SPRO->
Finantial accounting -> Accounts receivable and accounts payable ->
Define screen layout per activity (vendors) -> Change Vendor(Accounting)
Company code data -> W/holding tax data, w/h tax 2 ->
FIELD Withholding tax code,w/h tax 2 will be probably just available to
display. Please, change it to optional entry.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista

Why do we create indexes for DSOs and Cubes.What is the use of it?

Hi All,
Can you please tell me why are indexes created for DSOs and Cubes.
What is the use with the creation of indexes.
Thanks,
Sravani

HI ,
An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
Regards,
shikha

What is the use of additional file(s) in sender file adapter?

Hi experts,
what is the use of additional files parameter in sender file adapter?
give me some example.......
Thanks & Regards
E.Ravi Chandra Reddy

Hi,
please check the below link,
you can specify additional files to be included in the XI message as attachments.
http://help.sap.com/saphelp_tm90/helpdata/en/44/692ab8a4b633eae10000000a1553f6/content.htm
Regards

What is the use of specifying an "End Date" when certifying conditionally?

Similar Messages

Maybe you are looking for