What is the use of tab - "ALLOCATION" in Asset master creation (AS01)?

Hi experts...
in AS01, there are certain tabs like General, Time-dependent, Allocation, origine, Dep area...etc...
From these i am not understood the use of "Allocatio" tab. Please tell me when/why/where this can be useful?
Regards:
Dasu

The evaluation group fields are basically used in asset reports for classifying the assets based on various freely definable user texts. The investment support tab is basically used if assets are also defined as investment support measures in ANVEST. Lastly the equipment tab is used if there is integration between assets created in Asset acocuntng and equipment created in PM-Plant maintenance module.
Thanks and regards
Kedar

Similar Messages

Making Useful life field optional in Asset master creation(AS01)

Hi all,
I want to make 'Useful life' field in 'Depreciation area' tab as optional in AS01 (Asset master).
1. I made the screen layout changes using AO21 and made Useful life optional
2. I assigned the above screen layout in OAYZ
Despite doing this, during asset master creation, the field still shows as 'Required' and not as 'optional'.
Am I missing anything else? Kindly provide some pointers.
Thanks,
Sridevi

Hi Sridevi
Please check your depreciation key. If your depreciation is based on useful life, the key is required regardless the field status.
Thanks
Sanjeev

What is the use of OASV transaction in Asset accounting

Dear Experts,
Could you please advise me clearly what is the use of OASV transaction in Asset accounting and which GL account we need to use for debit and credit while using this t code. Can you please provide me along with examples for better understand and that would be great for me.
Thanks in Advance,
Murali

Transfer Balances
In this step you can post balances to G/L accounts which have already been defined as reconciliation accounts. You can only post these corrections in company codes which have implementation status.
The transfer of legacy asset data using the legacy asset transaction does not affect the balances of the corresponding reconciliation accounts in Financial Accounting. Therefore no automatic balance formation or reconciliation takes place and you will need to manually reconcile the balances. You can ascertain the Asset Accounting values using of the asset list. When you start this report, specify January 1st of the current fiscal year as the report date. The system will then provide data as of December 31st of the previous fiscal year (in other words, no depreciation from the current fiscal year is included).
Activities
Copy the balances from any suspense accounts to the Asset Accounting reconciliation accounts.

What is the use of access level

Hi Experts,
What is the access level and what is use of each option in access level
1 Application
2 Superior component
3. Top Component
4. Sap
5. Global
and in Details section what is the use Properties tab
1. Application Component
2. Software Component
3. Development Package
4. Settings Class
Please explain Each option use.
Thank you in advance,
Srini M.

Hi Srini,
just read the documentation (although the current status on SAP Help Portal isn't really up-to-date):
1. [Entry point|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm]
2. [Setting an Access Level|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/32/6aba9c49fd41a5a14f710e121220f1/content.htm]
W/r to "Application Component" etc., docu on Help Portal is definitely not sufficient. Here, the following applies:
An application offers attributes for the application component and the software component. The application component and software component have to be the same as defined for the development package. Application and software component are automatically derived from the development package if they are not set explicitly.
For the definition of the development package, application component, and software component, we recommend that you choose the same values that are in effect for the software solution that you want to enhance by a new BRFplus application. This simplifies all activities related to the software infrastructure, especially transports.
CU
Claus

What is the use of Module tab in Communication Channel ?

Hi Expertes
can any body tell me the that
What is the use of Module tab in Communication Channel ?
How we can use in the senarios?
Mainly What are the Situvation we can use this tab ?
Thank you
G,Praveen Kumar

hi rajesh
Thank You For Fast Responce
Error :
Exception caught by adapter framework: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified : com.sap.aii.af.service.util.configuration.ConfigurationExceptionSet: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
Can you Help me torectifiy the error .

What is the use of MiniApps Tab In PFCG?

Hi Friends,
can any one tell me what is the use of miniapps tab in PFCG.
thankx in advance....
regards,
kanthi reddy

Hi,
Sorry, but I don't think this is the right forum for miniapp issue.
anyway, how about:
http://help.sap.com/saphelp_47x200/helpdata/en/75/faf91a150f11d4964f00a0c94260a5/frameset.htm
cheers,
Vincent

What is the use of confirmation tab in Purchase order ?

what is the use of confirmation tab in Purchase order?

Hello Balaji
In Purchasing, the term Confirmation is an umbrella term for various kinds of information provided by a vendor to a customer with regard to ordered goods.
Possible types of confirmation include the following:
Order acknowledgments
Loading or transport confirmations
Shipping notifications. (Note that shipping notifications may also be referred to by a number of other names, including "advice (note)", "advice of dispatch", "ship notice", and "advance(d) shipping notice" ("ASN").)
A further form of confirmation frequently used in Purchasing is the Inbound Delivery, which is created on the basis of an incoming shipping notification. The shipping notification represents a vendors confirmation to a purchasing organization of a delivery date for a certain quantity of ordered materials (or the date of performance of ordered services).
You can enter incoming vendor confirmations manually. Alternatively, you can receive them via EDI and have them processed automatically.
When working with vendor confirmations, you have the following options:
You can enter the order acknowledgment number if you simply wish to provide a basis for monitoring the receipt or non-receipt of acknowledgments.
You should enter the confirmed quantities and delivery dates if you wish to provide more detailed information in support of the purchasing, inventory management, and materials planning/control functions within your enterprise.
Regards

What is the use of personalization tab in user creation?

what is the use of personalization tab in user creation

Hello Kumar,
Check these links for this
http://help.sap.com/saphelp_nw04s/helpdata/en/07/5430fbdb39fb4d9abb56754e039d0d/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ab/e70538389511d5974400a0c930dcc1/content.htm
Award points if helpful,
Regards,
Raju.

What is the use of Schedule Tab in Oracle BI Publisher

I am learning oracle bi publisher, here in the BI Publisher Enterprise screen , i got 3 tabs , 1) Reports 2) Schedules 3) Admin, here my Schedule tab is disabled..
What is the use of Schedule Tab ?
Edited by: joysaha123 on Mar 19, 2010 8:45 PM

Dont you think, this has to be posted in BI Publisher forum ?
If you had, this will get more visibility.
Neway, let me answer.
The reports can be scheduled for later, which can be monitored(download previously run report/re-run).

What is the use of Alternative Calculation Type =2 and 4

Dear Friends
In pricing procedure in gross value, Net value for Item and Net value has Alternative calucation type is 2.
What is the use of it?
Without using it these value line are also fetching net value then what is the work of it. Please give me detail information with its effects in pricing condition tab page in sales document.
Thanking You
Arun

Arun biswal,
Correct Biswal. We have at varoius stages within Pricing procedure the "net value" which is calculated. Not only the alternative calculation type "2" is used if you notice carefully they are stored as subtotals at various levels.
For Ex Gross Value --> Subtotal =1 --> Calc type = 2
similarly for Net value for Item --> Subtotal =2 --> Calc type = 2
Net value 2 --> Subtotal =3 --> Calc type = 2
See, these are used to calculate the net value at various levels in pricing. The calculation Type has got a set of routines that will facilitate us in pricing. SAP has provided certain clauclated formulas or routines to facilitate us during calculation within pricing . Here the "2" is used for calculation without tax and store it as subtotal and display it or use it for further calculations.
We can use this "netvalue" amount for further calculations. It is used for clarity purpose when you issue a statement to customer. (like Confirmation order) at various levels like discount amt involved, Freight involved, Rebate amount invloved.....
Even without this Calc type or using sub total u can proceed....
Finally we have TOTAL --> Subtotal =A --> Calc type = 4
In the above line we have Calc type as 4, which means when you use TAX this calc type is used .
Routines are used to facilitate your process....
Regards
Sathya

What is the use of T. code cj8g

Hi All,
Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
Thanks in Advance.
Chandu

CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas

What is the use of Standart text in SapScripts.

What is the use of Standart text in SapScripts?
How to Use in Forms?

Hi Puja Das,
Welcome to SCN,
As per knowledge, Standard text is mainly meant for Functional People
For eg : Try changing a Sale Order no. In VA02.
If you see the Header or Item details You will find Texts tab. In that you can see Form Header, Header Note1/2.
Here the Functional / User will enter some text according to their understand, when they print regarding they need that text on a FORM.
Thus these text will be stored in a Standard Text format.
And You can Use Standard Text in Script as follows:
/: INCLUDE DATE OBJECT TEXT ID ST
Regards,
Suneel G

What is the use of MAIN WINDOW in SCRIPTS

what is the use of MAIN WINDOW in SCRIPTS, y we con't create a script w/o main window.
Title was edited by:
Alvaro Tejada Galindo

Hi
See this
What are the different types of windows in SAP Scripts?
Windows are defined in the Layout sets which define the position and the text to displayed.
The different types of windows are:
MAIN - Main Window
The main window is a continous window which can extend over several pages. If the text in the main window fills up a page, a new page is created.
Only one main window can be defined in the SAP Script whereas upto 100 instances of main window can be created in a page.
VAR - Variable Window
This window can have the variable contents displayed on them. The contents of the window cannot exceed the window size. The content can be formatted for each page.
CONST - Constant Window
The constant window can have a fixed content and is formatted only once.
Main Windows (MAIN)
Each form must have one window of type MAIN. Such a window is called the main window of the form. For SAPscript forms, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the form. The SAPscript composer thus avoids reformatting of the text after each page break.
Variable Windows (VAR)
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different form pages.
Constant Windows (CONST)
Starting with Release 4.0, the system internally processes windows of type CONST similar to windows of type VAR. Therefore, if you create a new window, always use type VAR.
<b><REMOVED BY MODERATOR></b>
Anji
Message was edited by:
Alvaro Tejada Galindo

What is the use of E/F tables?

What is the use of E/F tables?

Hi,
When ever we are loading the data into the cube,the data 'll store in F table.
Ex: I have cube which Tech name is like 0RT_C03.And data is loaded.I can find the that data in F table bu navigating like this
Goto SE11 ,select Table radio botton and type /BI0/F0RT_C03.then click the display tab which is available in the bottom of the screen.
Ther you can find new screen the click the botton Content or 'shiftcontrolF10' and then click execute botton.Here you can find the loaded data.As this you can see E table data also .But you can find no data.
When we are generating the report based on this cube the F table data only available for reporting.not E table data.
I hope this 'll helps you.assign point if this helps
Regards
JT Goud

What is the use of T Code in RSRR in R/3 system?

Hi
Can anyone explain what is the use of RSRR tcode: BW RRI on the Web
in R/3 system.
How to use it?

CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas

What is the use of tab - "ALLOCATION" in Asset master creation (AS01)?

Similar Messages

Maybe you are looking for