What is the use of the auxiliary pins of 6602 counter card

Hello,
          I want to know about the Behavior of the auxilliary pins in 6602 counter card.

Hi Satish,
Counter n Auxiliary Signal
You can select any PFI or RTSI, as well as many other internal signals asthe Counter n Auxiliary (CtrnAux) signal. Much like this CtrnGate signal,the CtrnAux signal is configured in edge-detection or level-detection mode depending on the application performed by the counter. The aux signal can
perform many different operations including starting and stopping the
counter, generating interrupts, and saving the counter contents. You can
also use this signal to control the counting direction in edge-counting
applications.
Regards,
Santhosh M

Similar Messages

  • What is the auxiliary constructs in sql

    I need some help to know what's the auxiliary constructs, and examples in the auxiliary constructs

    Like everyone else, I am a bit puzzelled by "auxiliary constructs", but since, as michaels and Dave demonstrated, the update can be done in a single statement, I would guess that perhaps the:
    UPDATE Is_member
    SET Organization= 'EU11'
    WHERE Organization= 'NATO';query is an auxiliary construct, and perhaps even the query:
    UPDATE Is_member
    SET Organization= 'EU'
    WHERE Organization= 'EU11'; On the other hand, another method with a real construct (not sure if it is auxiliary or not) would be something like:
    CREATE TABLE member_temp AS
    SELECT * FROM is_member WHERE 1=2;
    INSERT INTO member_temp
    SELECT 'NATO' FROM is_member
    WHERE organization = 'EU';
    INSERT INTO member_temp
    SELECT 'EU' FROM is_member
    WHERE organization = 'NATO';
    TRUNCATE TABLE is_member;
    INSERT INTO is_member
    SELECT * FROM member_temp;but that is a really bad way to do it.
    Cheers
    John

  • What is the best e-Sata PCI RAID card for Mavericks.

    What is the best e-Sata PCI RAID card for Mavericks.  Bought a new MAC PRO with Mavericks and the older PCI 1095,3124 that I used on older MAC Pro does not work.  The MAC sees it, but the drivers never show up as being installed.  If I could find drivers that work or a recommended PCI card it would be appreciated.
    Thanks

    PM made sense - 6 yrs ago when disk drives were much slower. Today it is a bottleneck.
    SAS makes more sense. Outside of SSD, no disk drive maxes out by itself one PM interface (an SSD will) but it also means just two drives are enough to do so. So check out why to avoid PM:
    www.macperformanceguide.com

  • What's the easiest way to design business cards on a mac?

    what's the easiest way to design business cards on a mac?

    > If I understood him correctly, the Adobe salesperson I talked to
    > yesterday runs the Unix version of FrameMaker directly under OS X
    There is NO way to get the Unix (=Solaris) version of FM 8 to run
    under OS X. It's an executable compiled for the SPARC processor,
    and I don't think Apple has made a SPARC/Solaris emulator... :-)
    /Thomas Michanek

  • What is the "ingress over sub drops" counter // ASR1000?

    Hello,
    can you tell me what is the "ingress over sub drops" counter in the following output (ASR1004, 15.2(2)S1)?
    asr#show controllers
    <...>
    TenGigabitEthernet0/1/0
         21830397 input vlan errors
         7712082 ingress over sub drops
         18 Number of sub-interface configured
    <...>
    Thank you,
    best regards,
    Gergely

    Hello,
    thank you for your reply!
    This is a tengig interface which is not likely to oversubscribe (typical traffic rate is below 2.5 Gbps) however there could be some bursty traffic concerning this counter.
    There is no input queue drop on the interface - I wonder if the "input queue drop" related to "ingress over sub drops"?
    Best regards,
    Gergely
         asr#sh int ten 0/1/0 controller
         TenGigabitEthernet0/1/0 is up, line protocol is up
           Hardware is SPA-1X10GE-L-V2, address is a493.4cd0.c510 (bia a493.4cd0.c510)
           MTU 9216 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
              reliability 255/255, txload 1/255, rxload 60/255
           Encapsulation 802.1Q Virtual LAN, Vlan ID  1., loopback not set
           Keepalive not supported
           Full Duplex, 10000Mbps, link type is force-up, media type is 10GBase-SR
           output flow-control is on, input flow-control is on
           ARP type: ARPA, ARP Timeout 04:00:00
           Last input 00:00:00, output 00:01:29, output hang never
           Last clearing of "show interface" counters never
           Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 195
           Queueing strategy: fifo
           Output queue: 0/40 (size/max)
           30 second input rate 2371308000 bits/sec, 218149 packets/sec
           30 second output rate 2000 bits/sec, 4 packets/sec
              295771623646 packets input, 401390419037397 bytes, 0 no buffer
              Received 17352252 broadcasts (294214973196 IP multicasts)
              0 runts, 0 giants, 0 throttles
              0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
              0 watchdog, 2559103491 multicast, 0 pause input
              205479375 packets output, 266095482233 bytes, 0 underruns
              0 output errors, 0 collisions, 2 interface resets
              0 unknown protocol drops
              0 babbles, 0 late collision, 0 deferred
              0 lost carrier, 0 no carrier, 0 pause output
              0 output buffer failures, 0 output buffers swapped out
         TenGigabitEthernet0/1/0
              21831585 input vlan errors
              7712082 ingress over sub drops
              18 Number of sub-interface configured
         asr#

  • What's the difference between Gemplus and JCOP card?

    Hi~
    1. I'm using a Card that 'GEMPLUS' is written on golden contact point.
    I have to choose a card type among 'GemXpresso 211,211PK,Pro , GemXplore Xpresso' in JCOP Tool.
    Which I have to choose?
    Is there any way that what kind of card it is?
    2. What is the difference between JCOP card and Gemplus card?
    Is OS different?
    Anybody tell me the difference.
    Any help would be greatly aprreciated

    In some cases Gem+ sells JCOP cards under different name.
    Generally, JCOP is better (more security, more certificates, tools for free)

  • What is the secrect to print 4x6 Index Cards in an HP C309a

    I have a Microsoft Word Template for printing recipes on 4x6 Index Cards.    However, there is no known combination of settings on my HP C309a that will let me print Index Cards.    The built-in Printing Shortcuts contains an entry called Postcard Printing, but it call for using the Photo-Tray.     When I put my cards in the photo tray, it prints from the main tray.  If I remove the main tray it tells me add paper.
    This is a very simple task.  Why does HP make it nearly impossible to do something as trivial as printing on an Index Card?  I'm wasting sheet after sheet of paper trying to figure this out.   I need detailed, step by step instructions on how to proceed.   

    Yes, I did try that and it made no difference.     I must admit, the timing of your reply is perfect.    Just yesterday I accidentally stumbled on the answer to this problem.   And it clearly demonstrates how poorly designed the printing feature is in Microsoft Word.
    To print a 4x6" Index Card in Microsoft Word 2010, you must do the following on the Word Page Layout Toolbar:
    1. Click on the Orientation Icon and select "Landscape".
    2. Click on the Size Icon and select "Index Card 4x6 inch".
    3. Click on Margins Icon and select "Narrow".
    Place the Index Card stock in the Photo Tray and click on the Printer Properties for the HP C309a.   Then set the following preferences:
    Printing shortcuts: General Everyday Printing
    Paper source: Photo Tray
    Paper sizes: Index Card 4x6 inch
    Paper type: Automatic
    After setting the Printer Properties,  you must set the layout and scaling.  
    1. Click on the last drop-down setting in the Print Print Page.
    2. Next click on Scale to Paper Size and select Borderless 4x6in from the list.
    Lastly press the Print button.

  • What is the difference between corporate iTunes gift-cards and regular ones

    I have a small business and would like to make a competition and award iTunes gift-cards to the winners.
    I saw that there are corporate gift-cards but I don't know what their pros and cons are.
    And with regular gift-cards sent by e-mail: do the recipients receive my e-mail address or is it a no-reply e-mail?
    Thanks for the help.

    There are no functional differences that would affect the end user. I don't think there's any difference at all in the cards, actually, just the way you buy and the quantities you can purchase. See:
    http://www.apple.com/itunes/corporatesales/
    As to emailed codes sent through this program, I'm not sure if the recipient would see your email address. Call iTunes Corporate Sales and they should be able to tell you.
    Regards.

  • What is the correct USB 3.0 PCIE card for Z800?

    I'm looking to buy the correct USB 3.0 PCIe card for a Z800, but I cant find any thru HP. Any have any info> There's  12 and 60 dollar HP cards on EBAY, but I don't know if those are correct ones.
    This question was solved.
    View Solution.

    Hi,
    Based on the following specs, the machine has plenty of options:
       http://h18000.www1.hp.com/products/quickspecs/1327​8_na/13278_na.PDF
    You can buy 1-port card, 2-port card, 3-port card or even 4-port card such as:
        http://www.startech.com/Cards-Adapters/USB-3.0/Car​ds/2-Port-PCI-Express-SuperSpeed-USB-3-Card-Adapte​...
    You need to check the slot to get the right bracket for the card.
    Regards.
    ps eBay is a different story, you can buy few dollars card.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What are the benefits of having two video cards?

    I currently have a PNY Nvidio quadro FX 3800 video card installed.  I have another card that is not installed.  It is an EVGA E-GEforce 8800GT.  I only want to run two monitors.  I am thinking with two video cards I will have live preview on screen during HD video capture.  Is this correct?  What if any other benefits will I get from running two video cards?

    Hello
    I am using CS5 with a quadro 4000 card. I have two Eizo's attached to the quadro 4000 via the display port. Everything is working fine. I need to connect a plasma screen to my pc (3 monitors total) for viewing red files. I could use the red rocket to export video to the plasma screen but it would be nice if I didn't have to install another driver other than the quadro 4000 nvideo driver. My question is, will having 2 video cards installed in my pc cause any problems? If it will, I will have to use the red rocket for the third monitor. Thanks
    Bill Martz

  • What is the biggest size of compatible memory card...

    Hi,
    when I bought my E90 one year ago, I read somewhere (can't remember where) that there are problems if you use a memory card bigger then 2GB. If I remember correctly, there was a allegation that a bigger memory card would slow down the performance of the phone and would even freeze the phone from time to time.
    So, what memory card do you use with your E90?
    Please also mention what software you have installed, because this could be related with how it handles the additional memory!!!
    I recently updated my software to version 300.34.84
    Thanks in advance for your reply.
    Solved!
    Go to Solution.

    16GB cards works well but surely it slows down the phone as hell and the phone tends to hang a lot..........
    also during my six days alteast twice a day my phone would refuse to recognize this card........
    I tried installing my all apps on the phone memory but still the **bleep** was not repairable...........
    So i wud definitely advise not to experiment with the 16 GB card rather go for 8 GB either by Toshiba, kingston or even scandisk .......
    wat the hell nokia centers do also have made in Japan nokia branded 8GB cards..........
    Articles posted courtesy engadget
    keep us updated about the progress.... if u like wat I have to offer then click on khudos.

  • What's the difference in current iMac graphics cards

    I'm not really "up" on graphics cards, assuming that $++ = better performance what I'm wondering is how and when that difference becomes useful and noticeable.
    As we're shopping for a couple of new iMacs and are only interested in the 21.5" models would it make a difference to our workflow* to go for the more expensive option (discounting the .2ghz in processor speed).
    * Workflow being typical graphic design oriented tasks, indesign, photoshop, dreamweaver etc, no heavy video work or gaming.

    you would not notice a difference in .2 GHz.  Since you can not upgrade the graphics cards, it seems like you would benefit from a better one for the use you describe.

  • What is the point of Travel/Miles credit cards?

    If your going to that, you might as well keep using for the 2% right up until the AF is about to kick in then merge them!

    delaney1 wrote:
    YupYup413 wrote:
    kdm31091 wrote:
    If youre going for a travel card go for one of the actual miles cards, where you transfer points etc. The other ones are merely marketing scams IMO designed for people who dont know they can get the same rewards unrestricted elsewhere.
    Arrival and venture are examples of marketing and nothing else. BOA travel rewards mostly is too but at least it has no fee and you can access their travel portal for 3 percent back so its not as useless as the others IMO.I get that you hate the Venture, but it does have some benefits geared towards travel where you can maximize "miles" value. For 64,250 ($642) you can get a $900 gift card for Marriot, Ritz Carlton, Hilton, Fairmont, Raffles and Mandarin hotels.Also, you can redeem them for full cash value for tons of gift cards to all sorts of standard restaurants, travel, retail and amazon. So while it's not simple cash back, you can easily get full cash value for your your miles and sometimes even more. When I realized I could redeem venture points for giftcards and not lose any of the value, I put that on my app list. I'll just use it for the bonus then SD it until I can combine with my QS.The $642 to $900 does sound great value.   But in general, IMO, spending $100 in points for a $100 gift card isn't full-value, as a) you can often get gift cards at a discount from multiple gift card exchanges and b) when you use a gift card, you don't get the credit card rewards (or protection) you would get for the same purchase.   Which is why I prefer ACH cash or statement credit, unless the issuer offers heavily discounted gcs.

  • What is the icloud charge to my credit card about

    Icloud sends email that they will charge me $20 with credit card but doesn't give you a link to cancel
    How do I prevent the charge

    Hi Rstrickley,
    Here is an article that has information on iCloud storage upgrades, which sounds like what you are receiving an email about:
    iCloud: Storage upgrades and downgrades
    http://support.apple.com/kb/HT4874
    Downgrade your iCloud storage plan
    iOS 5 or later
    Tap Settings > iCloud > Storage & Backup > Change Storage Plan.
    Tap Downgrade Options, then select the storage plan you’d like to have when the next annual payment is due.
    There are also instructions for downgrading on a Mac or PC in the article.
    Cheers!
    - Ari

  • What is the maximum credit limit for this card?

    So I've had my Total Rewards Visa Signature for the past 18 months...started at 10k, always SP CLI every 4 months. Always got 4K CLI at a minimum but yesterday I only got a 2K.  The card is now at 30K.  Anyone ever get this card go beyond 30K or is that the maximum for this card?

    I don't think there is a maximum. I'm sure it's relative to income. I haven't seen it higher than 30k.

Maybe you are looking for

  • Appraisal template standard buttons not working via ESS/MSS

    Hi experts, The error which I am facing in appraisal template is as follows When I click on any button on appraisal template no action takes place. Kindly let me know how can I resolve this error. we are using BSP application HAP_DOCUMENT. according

  • Multiple Row in a Function

    Hi Guys, I have a function as below: CREATE OR REPLACE FUNCTION BUSOBJ.pos_countrycode_lookup ( record_locator VARCHAR2, pnr_creation_date DATE RETURN VARCHAR2 IS pnr_id NUMBER; city_code VARCHAR2 (10 BYTE); country_code VARCHAR2 (10 BYTE); record_lo

  • Best Practice Analyzer Results: Health Report Error EDS AlertValue Unhealthy.

    I ran the Microsoft Office 365 Best Practices Analyzer Beta 1.0 and I get the following error: C:\windows\system32>Get-healthreport -rollupgroup servername.. then I got lots of results.. I narrow it to the following! PSComputerName          : kaneex1

  • I cannot transfer purchased music from pc to iphone 4. Will not let me drag and drop.

    I purchased an album and downloaded to my itunes on my pc. I cannot get it to transfer (copy) to my iphone 4. It will not drag and drop nor will it copy and paste. Any solutions.

  • Disabling rows under item conditions tab in VA02

    Dear all, I want to disable the rows which are being displayed under item conditions tab in T-code VA02. is there any user exit to resolve the same problem or any other solution is also acceptable. help me to find that how i can achieve this. Its Urg