What is the value sets?

Hi all,
What is the value sets? can somebody explain me about it with example
Regards
Kiran Kumar

hi,
chk the links
Precalculated value set
check the below link.
http://help.sap.com/saphelp_nw04/helpdata/en/84/00783b3af21f5ee10000000a11402f/content.htm
Defining Value Set Settings (SAP Library - BI Platform)
http://help.sap.com/saphelp_nw04s/helpdata/en/84/00783b3af21f5ee10000000a11402f/frameset.htm
Ramesh

Similar Messages

What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

Hi gurus
In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
on a 64-bit Windows OS?
According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
"By default, the
Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
occurs."
Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
Thanks
Michael Brandt Lassen

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What's the minimum setting for WL as a proxy server

What's the minimum setting of weblogic.properties for WL as a proxy server?

Hi Michael,
Recommended setting is the default setting which is 25 .dot.
If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
High process memory
Process memory usage (MB)
Process memory usage threshold (MB)
You can see these counters under “BizTalk:MessageAgent”
You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
high values and causing throttling, then you can update the Process memory usage.
Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
usage.
The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
hike (or any reasons) which caused throttling, then do changes to default throttling setting.
Just changing the default setting without actual reason could have adverse effect where you end up allocating
more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

What's the value of GLOBAL_DBNAME in the listener.ora ?

SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0      Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
SQL>
SQL> show parameter db_name
NAME                         TYPE      VALUE
db_name                      string    Oracle11
SQL> show parameter service_names
NAME                         TYPE      VALUE
service_names                        string      primary
SQL>
SQL>
SQL> ho
[oracle@primary admin]$
[oracle@primary admin]$ cat listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = primary)                        ================> Note Here , i asked this parameter .
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
      (SID_NAME = primary)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.178)(PORT = 1525))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@primary admin]$
[oracle@primary admin]$
[oracle@primary admin]$ exit
exit
SQL> in my option , i think the value of GLOBAL_DBNAME equal to the value of DB_NAME . But it's wrong , the remote client can't connect the database .
when its value equal to the value of SERVICE_NAMES , the remote client can connect the database .
what's the value of GLOBAL_DBNAME in the listener.ora ?

GLOBAL_DBNAME     The global database name is a concatentation of a domain and a database name. The GLOBAL_DBNAME is the same as SERVICE_NAMES parameter in the parameter file or a concatentation of the DB_DOMAIN and the DB_NAME parameters in the parameter file. For example, <SID>.xyz.com. Do not set the GLOBAL_DBNAME parameter in the listener.ora file when using failover / TAF or when using multiple listeners or Oracle Parallel Server. Setting the GLOBAL_DBNAME parameter under these circumstances will disable failover and TAF.from: http://oracledba.ezpowell.com/oracle/net8Listener.html

What is the Value of SY-UCOMM when we copy the SC?

SRM Experts,
What is the Value of SY-UCOMM(Function code) when we copy, create, delete and change the SC in SRM 5.0?
Thanks!
MP

Hi,
Just put a break point in the BADI and create a SC.At runtime,you can see the value of the field "SY-UCOMM".Also as Dean suggested ,you can look in the std program for the OK-codes for the various buttons on the screens.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

What is the value of sy-ucomm when tab is pressed

Hi Experts,
what is the value of sy-ucomm when tab is pressed or is there any way to detect or capture the pressing of tab as we do for the enter. if so kindly help
please advance thanks

Hi Samraj,
Consider this sample code, here based on user commands the code calls the Tab's.
Define
Data : pressed_tab LIKE sy-ucomm VALUE c_ticket-tab1,
IN PBO
MODULE ticket_active_tab_set.
CALL SUBSCREEN ticket_sca
INCLUDING g_ticket-prog g_ticket-subscreen.
MODULE ticket_active_tab_set OUTPUT.
ticket-activetab = pressed_tab.
CASE pressed_tab.
WHEN c_ticket-tab1.
g_ticket-subscreen = '0204'.
WHEN c_ticket-tab2.
g_ticket-subscreen = '0205'.
WHEN c_ticket-tab3.
g_ticket-subscreen = '0206'.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. " TICKET_ACTIVE_TAB_SET OUTPUT
Thanks,
Reward If helpful.

Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

What is the factory set password for the administrator for a macbook pro 13" retina display?

what is the factory set password for the administrator for a macbook pro 13" retina display?

Welcome to Apple Support Communities
Macs don't come with a password. You have to set up the password during the initial setup. If you have forgotten your password, follow these steps to reset your password > http://discussions.apple.com/docs/DOC-4101

What is the value of MacBook Pro 17 inch 160 GB?

What is the value of MacBook Pro 17 inch 160 GB?

You can try one of Apple's recycling partners to see how much they'll offer for it:
http://store.apple.com/us/browse/reuse_and_recycle
But you are likely to get more for it on ebay or craigslist.

CRM R12.0.6 Map Type does not exist in the value set

Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, Louise

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What Is The Best Setting To Use To Import Music?Please Help.

Hi, All
I have got an 80GB Apple Video iPod And I am still trying to figure out how to work it as I am new to using iPods.
What is the best setting to use to import CD Music and Music from the Internet to iTunes?? as I would like to listen to the highest quality there is on iTunes and my 80GB Apple Video iPod.
The settings are: ACC Encoder, AIFF Encoder, Apple Lossless Encoder, MP3 Encoder, WAV Encoder. If you have not got them to hand.
Many Thanks For Reading This And Replying To It, Much Appreciated!!
I Hope You All Have a VERY Merry New Year!!
Kind Regards, Rocky Robin

There really is no BEST setting. The "best" setting is the one that sounds the best to you.
Having said that, you also asked what setting provides the highest quality audio. In that case, you need to use a lossless format, such as AIFF, WAV, or Apple Lossless. MP3 and AAC are both compressed formats, and will not provide as good of an audio quality as a lossless format.
My personal preference would be Apple Lossless, but any of the lossless formats will produce an almost identical quality to the CD track.
Keep in mind, the files will be quite large.

On my mini ipad, I cleared the cookies/histories in the safari setting. But what does the advance-setting of the clearing the website data does? What's that used for? Thank you!

On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar. I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
Should I go to the cookies/histories in the safari setting and have it cleared out? Will that help resolve that??
And what does the advance-setting of the clearing the website data does? Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!

This indicates corrupt files.
A restore should resolve.

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

What is the best set up for video editing?

What is the best computer? The best software? The best external storage? The best ram? 3D editing? Everything!!!!!!
Running full HD and 720p at 60 fps videos. Clips ranging from a few seconds to 10-30 minutes.
Cost isn't an issue.
What is the best set up, not the most excessive. If it doesn't need to be there or it isn't greatly needed I would like to know. This is looking at the production aspects, not the camera and such. What is the best plug in for slow motion? Pros and Cons of the set up?
I would greatly appriciate everyones input in this. Thank you so much.

That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
A high end windows pc (only cause mac pro hasn't been updated in ages)
Avid Media Composer with Nitrus DX
Two monitors
Broadcast monitor
HD Deck
pimping 5.1 speakers
A good mixer
You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
If price is not an issue then there you go....
However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
Have a second monitor..
I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
Be more specific and you will get clearer answers..

What are the values and meaning of PaymentStatusID and statusTypeId from the API

What are the values of PaymentStatusID and statusTypeId from the API?
The WSDL just list the fact tht these exists but not the values and meaning.

Found more info on the BC site, figured I'd include it all.
PaymentMethodType
CreditCard = 1
Cheque = 2
Cash = 3
EFT = 4
PayPal = 5
HostedCreditCard = 7 - like google checkout etc.
DirectDebit = 8
GiftVoucher = 9
Free = 10
PaymentStatusID
Unknown = -1
Succeeded = 0
Failed = 1
Pending = 2
Denied = 3
AddressTypeId - AddressType
Home Address = 1
Work Addres = 2
PO Box = 3
Not Used = 4
Shipping Address = 5
Pickup Address = 6
Storage Address = 7
Billing Address = 8
OrderType
Quote = 1
Invoiced = 2

What is the value sets?

Similar Messages

Maybe you are looking for