What is the voltage of the GeForceFX 5200 TD-128?

What is the voltage of the GeForceFX 5200 TD-128? (1.5v, 3.0v?)
Thanks!

Woot!, Thank god, Just bought a board with 1.5v Max :P
Thanks for info!

Similar Messages

  • GeForceFX 5200 tdr-128 overclock problems

    I have a msi k7n2 mobo with the last drivers (nforce2) and bios, I'm runing my msi GeForceFX 5200 tdr-128 with the last drivers and bios too on windows xp sp1 with the last updates, the system is runing perfectly with no problems at all, but when I try to overclock my video card using that D.O.T (dynamic overclock tecnology) my windows looks up with memory blow , the mostpowerfull option is commander, with 275 mhz on 3d core clock (250 by default) and 440 mhz on memory (400 by default) the 2d clock stay the same. But I can overclock my 3d clock up to 295mhz with no problems but if I put more 5mhz on memory clock the system loocks up in 30-45 min .
    WHY CANT I OVERCLOCK MY DAMN MEMORY CLOCK???  
    The msi site says it is full compatible with the D.O.T and I'm using a MSI MOBO dammit
    And yes... I have a cooler on the video card, and left 2 side cooler on my cpu case (1 on the dual memory and 1 on the video card) plus 2 back exaust and a vulcano 9 on my athlon 2.4 xp.
    what can I do???
    I think maybe the sollution it is the raise the agp voltage but im afraid  

    40MHz on your ram is quite large anyways, and if you dont have ram-sinks on your VGA card (both sides) that might be a good solution,  also stock cooling on the GPU with large increasements is not a good idea.  I would not overclock the 5200 card anyways your taking a risk of blowing something up for no performace increase that card is pretty much all budget there is not much helping that card sorry.

  • What is the voltage of ipadmini retina? is it 110v or 220v? I bought in US and would like to use it in Indonesia

    What is the voltage of ipadmini retina? Is it 110v or 220v? I bought in US and would like to use it in Indoensia

    Thanks, I saw that number in the charger, but what I meant Is what is the volatge in the equipment (the ipadmini) itself? because if the equipments only accept/ built for 110v can be charged with 220v. Indonesia all the voltge using 220v

  • What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

    What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
    Thanks for any help

    Hi Donavan,
    There are two options for zeroing with the NI-9237.  You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
    See the Bridge Balancing, Offset Nulling section in  the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements.  See the above tutorial to consider the tradeoff in accuracy between these two options.
    Hope this helps,
    Jennifer O.
    Applications Engineer
    National Instruments

  • What is the power voltage for appletv

    What is the power voltage required for apple tv? This is not mentioned in the booklet.

    It's described as a Universal power supply and as far as I know assuming you're not hooking it up to some non-standard home made power supply it should work worldwide on known mains systems (at the very least in those countries where it is sold ANY AppleTV should adapt to the local mains power).
    AC
    http://www.apple.com/uk/appletv/specs.html

  • What is the best way to detect peak to peak voltage for the following waveform ?

    I have two channels of waveform train ( ie W1 & W2 ), each of them is of frequency 64KHz.
    Each channel of waveform train consists of sinewaves of 64KHz of fixed amplitude, say 2 V pk to pk, running for 100 cycles, and then rest for 0.15 sec continue with a sinewave of 64KHz of another fixed amplitude, say 1 V pk to pk running for 100 cycles as well, and then rest for 0.15 sec. The above cycle considered as a complete waveform cycle.
    The above complete waveform cycle repeat for 10 cycles and rest for 1.3 sec and repeated itself.
    From the two simulated waveforms (ie W1 & W2), I need to detect and measure the peak to peak voltage of each of the 100 cycles sinewaves.
    What is th
    e best way to achieve that ?

    The waveform is free running as described above, ie sinewave running at approximate 64 KHz for about 100 cylce at fixed amplitude, say 2V ( actual number of cylce unknown, could slightly more or sightly less, depanding on the machine ) then rest for approximately 0.15sec, another sinewave running at approx. 64KHz at fixed amplitude, say 1.5V ( actual number of cylce unknown, could slightly more or sightly less, depanding on the machine ) running for approx 100 cycles continue...then rest for approx. 0.15 sec .....the above waveform repeated itself and free running .....I would like to capture or trigger each of the 100 cycles sinewave (rest time of 0.15 sec between each approx100 cycles of sinewave) to measure the peak to peak voltage and st
    ore them in array for analysis purpose....what is the best way to achieve that as I do not have time reference, I only know that the waveform is running at the pattern described above.
    Thanks for your help !

  • What is the DC voltage requirement?

    Have lost my manual.    What is DC voltage requirement for p2-1310?

    Hi,
    Please use the following information:
    Power Supply
    External 65W (100V-240V)Total wattage: 65W
    Input voltage:
    100-127V (50-60Hz)
    200-240V (50-60Hz)
    Output voltage:
    19V DC
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What are the safe limits of current and voltages

    What are the safe limits of current and voltage of an ac signal to the NI USB 6008.

    Hi hanan,
    current is voltage/resistance. There surely a resistance is given too...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • What is the optimum charge voltage for IPOD Touch latest version?

    Genuine Apple Chargers have either 5V, 10V or in some cases 12V for IPODs/IPADS; what is the optimum charge voltages for IPODs and IPADs?

    All the newer iPods, all iPod touches, all iPhones and all iPads use the USB voltage which is 5V DC. Some chargers say 5.1 V.
    Old iPods use FireWire charging which is 12 V DC

  • What are the voltage requirements for the charger?

    What is the range of voltages that you can plug the iPad 2 charger into?

    Thank you. I can't read the light colored font on the ac plug module. Thanks again!

  • What's the voltage input needed to run and charge the iPad 4?

    What's the voltage input needed to run and charge the iPad 4?

    As long as the charger is rated for at least 10 watts or 2 amps it well charge the iPad just fine. A higher rated charger such as the 12 watt 2.4 amp charger will also charge the iPad, possibly a little faster, but it will not damage it. Chargers rated at 5 watts or 1 amp may charge an iPad very slowly if not at all.
    Just be aware some cheaper dual port USB chargers share the 2 amps. It will charge an iPad in one port but adding another will reduce the current to both ports to 1 amp. An iPhone may charge fine but the power would be reduced to the lower level and slow an iPad charging on the other port. The one you link to will work fine although it looks as though one port is 5 watt/1 amp and the other is 10 watt/2 amp. There are many adapter's available that will supply 10 or 12 watts to both ports to future proof the charger giving you the capability to charge 2 iPads or other more demanding smart phones with larger batteries. I like Scosche reVolt chargers, they cost a little more but they are a quality product. If you want the best option go with a 12 watt charger which can speed up charging on many products a little more than a 10 watt can.

  • When using the analog inputs and analog outputs of the PCI-7344, what is the conversion between the voltage entering the card to counts? Similarly, what is the conversion between counts to voltage at the output of the card?

    I am using the PCI-7344 to control my system. The analog inputs are connected to the output of my system while the analog outputs serve as feedback to the system. The system is a servo. I want to know what is the conversion between the voltage read at the input, to card counts, and finally to the voltage output to the system.

    Carole,
    If you are trying to do analog feedback with a servo motor, Chapter 14 of the manual talks about how to set up the torque feedback. Also linked below is a LabVIEW example of analog feedback.
    Chapter 14
    NI-Motion User Manual
    Automatic Analog Feedback with FlexMotion example
    A. Talley
    National Instruments

  • What is the max voltage rating for motherboard on Satellite 1110?

    what is the maximum voltage rating for the motherboard in the Satellite 1110 please?
    Because my current cpu (1.5ghz celeron) is 1.025 volts and i would like to change the cpu
    to something faster (cooling will be dealt with btw XD)
    The only problem being that the new cpu needs 1.3 volts to run.
    Any info wud b much appreciated

    I had the same machine years ago and I suggest you no to do this, because nothing will happen.
    We tried to put a another CPU onto Mainboard and it simply didnt boot. I dont know why it didnt work, but luckily the machine started after that with the old CPU on the board again. I assume that the chipset is not giving enough power to CPU. I assume, when youre putting the wrong CPU on the Board then you, in the worst case, seriously damage your Mainboard.

  • What is the voltage coming out of the ear phone port?

    what is the voltage coming out of a apple4s ear phone port ?

    Hi Ewanant123!
    Here is an article for you that will help you troubleshoot this issue with your sound on your iPhone:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • What is the right charger for a MacBook Pro 13"  mid 2009 model?

    What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is  thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger.  A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
    All help much appreciated. THANK YOU

    Both power adapter I have are different (at the magnet end) from the one in link.
    Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
    Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

Maybe you are looking for