What is the "XperiaTransfer" file/folder?!

I was looking at the "Storage" section in settings on my Xperia Z1 and it says I have 3.12GB under "Misc." on my Device Memory. When I click "Misc." it lists several files (or folders?), one of them being "XperiaTransfer" which is 2.94GB in size.
What is this file? Is it vital to the phone operation, does it contain everything I've copied from my old phone (which I thought I had moved to the SD card?!) or is it perfectly safe to delete this file/folder? It's almost 3GB in size after all! I do want the stuff I've transferred from my old phone though, so if this is all contained in this file/folder then I think I'll have to keep it.
Thanks for any help with this,
Ian.

From my understanding this is basically a temp file created during the Xperia Transfer process. I would advise backing up the file before deleting it but it shouldn’t cause any problems if you remove it.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

What does the blinking file folder mean when I turn on my computer?

So my computer got unplugged while it was loading a web page and now when I turn it on it just shows a blinking/flashing file folder with a question mark on it. What am I supposed to do?

The startup disk has possibly been corrupted...try starting holding the Option key and then select the main hard drive and see if you can continue to normal startup. If that does not work, insert your Mac OS X install disk, you show you have 10.6.8, and restart either holding the Option key and select the install disk or holding the C key so you boot from the install disk. Then reinstall Snow Leopard to cleanup whatever is corrupted. If you do a normal reinstall you will not lose information.

What is the 'Recovered Files' folder often in my Trash??

???

[A folder called Recovered Files appears in my Trash|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2267.html]
http://discussions.apple.com/thread.jspa?threadID=2678276

What is the minimum file system access needed to run ODI 10.1.3.4.0 client?

Hi ODI discussion folks,
I have a couple of questions from an Oracle partner that I'm trying to find a definitive answer for if possible. The partner is setting up ODI 10.1.3.4.0 for a customer who insists that the absolute minimum amount of access to the file system is granted due to corporate security policies.
I have checked the bundled ODI documentation but couldn't really find anything about file system permissions needed to run the ODI client. I was pointed towards the "Setting Up Security for an Integration Project — What to Consider" document but this does not mention a great deal about how much access to the file system is needed for the ODI client to function.
What the partner is asking is the following:
"1. What are the minimum file/folder permissions needed for the ODI client installation? I'm installing at xxxxx
and their machines have to be locked down as much as possible.
2. Say you have 3 users all wanting to run integrations etc and the Master and Work
repositories have been set up. An admin installs the ODI client but doesn't
create the connection to the Master repository. What are the minimum
file/folder permissions required on the client machine to:
a) create the connection to the repository
b) run any subsequent integrations?"
If anyone can advise on this then that would be much appreciated.
Regards
Craig Huggans
Oracle Hyperion Support
Message was edited by:
user648991

Hi Craig,
How are you?
Let me try to contribute a little....
1) The minimum requirement is for its own installation directory, there is no reason to have access to other directories unless if it is necessary to read files from some other directory at the client
2) Again only to its own install directory. The connection setting is recorded at \bin install directory. After that, all information are recorded at repository, there is no client work.
Be free to contact me by email or phone if you have any new doubt. You can get my email from my profile.
Does it respond your doubts?
Cezar Santos

Is it safe to delete the cache file folder from library

is it safe to delete the cache file folder from library ?

As I understand it Robo doesn't really 'do' third-party
source control. We use SourceGear Vault, but really only as a
repository for the files. We can't really work concurrently because
Robo needs exclusive access to the top level project files. But it
kind of works for us, because we're on opposite sides of the globe.
I see what you're saying on the 'local' versions of (say) the
cpd files conflicting. If anyone else has an informed view, I'm all
ears. We've set it up this way ourselves - I don't know of anyone
doing the same. If someone tells me this is a bad idea, I'm happy
to think again.
Cheers!

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

What does a blinking file folder with a question mark indicate?

What does a blinking file folder with a question mark indicate? I cannot get past it or do anything with the unit.

glamiera wrote:
What does a blinking file folder with a question mark indicate?
That's the firmware telling you it can't find the operating system it's been assigned to boot from.
It could be because it forgot somehow, or the operating system is no longer there or readable or the hardware holding the operating system has failed.
Hold the power button to force a hardware shutdown, then reboot holding the option/alt key held down on the wired or built in keyboard, icons will hopefully load on the screen and if OS X appears, click the arrow to boot from it.
Once in OS X, head to System Preferences > Startup Disk and select your boot drive so it can remind the firmware.
If there is no OS X boot volume, just recovery or Bootcamp (if Windows installed) then you need to perform more work.
Create a data recovery/undelete external boot drive
To get a copy of your files off the drive.
Step by Step to fix your Mac
To fix your machine and find out (hardware test) if it's a hardware issue of some sort.

What does a grey file folder and ? mark blinking mean on my macbook?

What does a grey file folder and ? mark blinking on my macbook mean and how do I fix it???

With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
If you're running 10.7 Lion check this article
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
With 10.8 restart holding the Command and R keys, then from the drop down
of actions, choose Terminal. When Terminal opens type:
resetpassword
and press enter.
You will get a reset password window from which you can select the user you want to reset, the admin account in your case. Type a new password twice, do not do anything with the hint box. Click Save, then confirm you want to do this reset. Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart.

What is the exact file name for Adobe Photoshop Elements application?

what is the exact file name for Adobe Photoshop Elements application?
I jsut downn laoded it and the alias does not work. in the support folder I have an application titled Adobe photoshop Elements Editor and it lauches ok but when I got to import a photo it only asks for a frame from a video.

You do not import anything to the editor. You just open things there using File>Open. Import is only for frame from video and for scanning if your scanner is compatible and you install the PSE twain plug-in.
If you wish to use PSE to keep track of your photos, launch Adobe Elements 11 Organizer instead of the editor.

Using the recovered files folder in the Trash for Flash CS5 files

I'm creating a complex animation (hand drawing every two frames on a Cintiq) in Flash CS5 and, despite saving, lost the day's work upon my Mac freezing - over 300 drawings, just gone. The recovered files folder contains /tmp and .dat files, and I've found no guidance online as what to do with these. Please help!

Those files in the recovered files folder happen when an APP crashes with unwritten data/files.
It's not very likely those tmp or dat files will be of any use, but if critical get HexEdit and open those files for a look...
http://hexedit.sourceforge.net/
We should work on why the crashes & loses are happening.

Where do I find the Work Files Folder

Where do I find the Work Files Folder?

Do you mean Workspace? What version of Photoshop?
Here's the applicable Adobe tech Note for Photoshop CS6:
http://helpx.adobe.com/photoshop/kb/preference-file-names-locations-photoshop.html
Welcome to the forums, and for next time:
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What is the default iTune Folder Structure for iTunes 10?

What is the default iTune Folder Structure for iTunes 10? As far as I can tell in windows 7 it goes something like.
My Music\iTunes\iTunes Media\Music
Other folders for downloads, pod casts, mobile applications are all in the iTunes Media folder, however the iTunes library database files are located in the iTunes Folder.
The reason I ask is that I am re-doing my music collection and I set up the folder structure mentioned above, but iTunes re-arranded everything and copied all of my music into the iTunes Media folder.
Anyone have any idea how iTunes does it by default?

Here are typical layouts for the iTunes folders:
If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other.
Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is greyed out (already upgraded) or you prefer the older layout.
2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organised outside the designated media folder into it. NB This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards. If space is at a premium try my scripts Unconsolidated to find out what would need moving and ConsolidatebyMoving to move rather than copy it.
3. Select Edit > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
4. Select Edit > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
5. (Optional) Close iTunes, rename the folder iTunes Music as iTunes Media then restart iTunes. Check under Edit > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename.
6. (Optional - Windows only) If Windows Media Player has ever had access to your files it may have liberally scattered folder artwork files about which iTunes won't tidy up when it reorganizes things, thus leaving behind a heap of folders with artwork and no media. I've written a script for cleaning this mess up called CleanDeadArt.
PS If you really prefer the older layout, but it is already in the new one then edit the file called .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
tt2

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

What is the use of FOLDER NODE in SMARTFORMS?

what is the use of FOLDER NODE in SMARTFORMS?
please explain.

Hi,
By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Reward all helpfull answers
Regards
Omkar

What are the Jar files required,that for accessing the Type 4 Drivers.

what are the Jar files required,that for accessing the Type 4 Drivers.
Regards,

Well it is Database Specific.
Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

What is the "XperiaTransfer" file/folder?!

Similar Messages

Maybe you are looking for