What is the yellow portion "other" when updating your phone on itunes? What makes up that category?

What is the yellow portion "other" when updating your phone on itunes? What makes up that category?

anything that's not music, photos, apps, etc. anything that is not whatever is shown next to the other on the bottom of your screen. for example, if you look on your phone at settings, general, usage and click on any of the apps it will show you how much the actual app takes up and also how much documents and data it has; that documents and data portion will be counted as other. most phones that are operating normally have around 1gb of other so if you have a lot more than that you probably have a corrupt file or something. in that case search "removing other from iphone" will help you, but usually restoring is what will fix it.

Similar Messages

  • What does the "yellow section"  "other" files mean under hard disk storage?

    what does the "yellow section"  "other" files mean under hard disk storage?

    david just to right of your initial post is a column entitled "More Like This." Check out some of the posts that seem similar.

  • When looking at how much room is taken up by audio, apps, etc. on your phone in iTunes, what is the "other" category?

    When looking at how much room is taken up by audio, apps, etc. on your phone in iTunes, what is the "other" category?

    "Other" contains documents and app data associated with apps.  It can also contain things like stored emails and browser history.  It's usually around 1-2gigs.  If it's any more than that, there's a chance that you have corrupted data on your iPad.  The only way to fix that problem is to restore your iPad to factory settings and start anew.

  • HT4623 after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

    after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

    If it now says "invalid" or "unsupported" SIM, your iPhone was almost certainly hacked to unlock it from the original cell carrier and updating has now removed that hack and the iPhone has relocked back to that original carrier. You will have to contact that carrier and ask if it would be possible to get your iPhone officially unlocked.
    Regards.

  • What does the yellow portion of the capacity bar represent when your iPhone is plugged into iTunes?

    Is this yellow "other" portion potentially destructive to one's iPhone? Is there anyway to "clean-up" your iphone?

    "Other" is anything that does not fit into the rest of the sections.  This can include pictures taken with the device, SMS/MMS history, iOS, application data, and sometimes corrupted files.
    If "Other" has grown extremely large, like over 1GB, try a restore first from backup.  This should significantly reduce the size.  Cleaning up old SMS/MMS messages will also go a long way towards reducing the size.

  • What's the exact trigger for when updating/inserting/deleting data from one DB to another DB which contains same info?

    Hi guys,
    I have created a copy of the AdventureWorks2012 DB called AdventureWorks2012_new on the same instance.
    I have created the following trigger below but my friend who is a DBA told me that this is not correct and I should be using the inserted table when creating this trigger. I would like AdventureWorks2012_new DB to be updating/inserting/deleting data from
    the same tables that have been updated/inserted/deleted in the AdventureWorks2012 DB. How exactly should I do this for all the tables in the whole database ? What I have written below is just for one of the tables, is there a quicker way to do it for all tables
    in this DB so that it performs the actions mentioned above, automatically ? Help would be greatly appreciated so I can understand how this works, thanks
    CREATE TRIGGER [HumanResources].[tr_HumanResources_AfterUpdate]
    ON [AdventureWorks2012].[HumanResources].[Department]
    AFTER UPDATE
    AS
    BEGIN
    SET NOCOUNT ON;
    UPDATE AdventureWorks2012_new.HumanResources.Department
    SET Name = t2.Name,
    GroupName = t2.GroupName,
    ModifiedDate = t2.ModifiedDate
    FROM AdventureWorks2012.HumanResources.Department AS t2
    INNER JOIN AdventureWorks2012_new.HumanResources.Department AS t1
    ON t2.DepartmentID = t1.DepartmentID
    END

    For insert it's easy:
    CREATE TRIGGER [HumanResources].[tr_HumanResources_AfterInsert]
    ON [AdventureWorks2012].[HumanResources].[Department]
    AFTER INSERT
    AS
    BEGIN
    SET NOCOUNT ON;
    Insert INTO AdventureWorks2012_new.HumanResources.Department
    (DepartmentID, Name, GroupName, ModifiedDate)
    SELECT DepartmentID, Name, GroupName, ModifiedDate
    FROM Inserted;
    END
    I didn't verify column names, so you may need to make sure to use correct column names for that table.
    Setting replication is a bit advanced topic although BOL is clear and you may start here
    http://technet.microsoft.com/en-us/library/ms151198.aspx
    If it will be complicated for you, you can ask extra questions in the MSDN Replication forum.
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

  • What does the HD storage "other" run on your mac book pro?

    My mac book pro is approx 4 years old and has a 120 GB HD. It seems like the "other" section has increased dramatically (now 52 GB) in recent weeks and I am wondering if something is wrong. I have run disk utility and verify permissions and corrected any errors and this has not changed anything. I have 32 GB free space on the drive. Does that seem logical. I have also trashed a lot of pictures and documents and that hasn't changed anything significantly. Thanks for any guidance.

    So from reading other entries, Time machine is doing local back ups and will stop doing that at 90% of the hard drive capacity. Guess this is something new with Lion, thought I had something that was gobbling up my HD space.
    Here is what disk inventory X shows for my HD usage. Not sure why mail is taking up so much space. I delete all my crap and literally save no mail.

  • Ipod touch 4th gen - what is the yellow bar know as "other" in storage on itunes?

    ipod touch 4th gen - what is the yellow bar known as "other" in storage on itunes?  It is using all the space and not allowing me to download anything else.  Is there a way of getting rid of it?

    It includes arwor, mail. messages and some app date. Basically, what is not icluded in the other categories. If over about 1 1/2 GB that usually indicates that the "other" includes corrupted files.  Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Backing up, updating, and restoring iOS software

  • What is the Yellow "Others" in Macintosh Hard Drive

    I'm using a Macbook Pro 13 inch mid 2009 running OS Lion. I'm making movie and doing graphic so the space of the hard drive is very important to me. I have no ideas what is the so-called "other" takes me 41gb and as 2 times higher than music, movie, apps combined. Please help me to solve this problem.

    Credit to Pondini.
    You may find relevant information in these articles.
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/TM/FAQ.html
    Hope this helps.

  • When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes.  When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126).  Can anybody tell me what this means?  Thanks

    When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes.  When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126).  Can anybody tell me what this means?  Thanks

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • What is the default staging mode when it is: (not specified) ?

    Hi All,
    What is the default staging mode when none is specified?
    As per docs, there are three: stage, no stage and external stage
    http://docs.oracle.com/cd/E17904_01/apirefs.1111/e13952/taskhelp/deployment/SetAServerStagingMode.html
    Many thanks.
    Running Weblogic 10.3.5.0 on OEL.

    "stage" directory means that the EAR file will be temporarily copied to that location and will be used only when the application source directory is not available OR when the administration server is down.
    It is like a local copy of the source directory for your application.
    Sometimes, during restart/redeployment, the managed server could pick the application files from the stage directory.
    But, in general if you use the "Update" option in "Deployment", the files in the stage directory are replaced by the files from the "source" directory.
    What I suspect here is in PROD, if you might have any permission issues with the stage directory?
    Can you please check that the stage directory is owned by the user running the server process AND that the directory permissions is set to 755. And not only directory the files also should inherit the same ownership and permissions.
    That is the only thing I can suspect.
    Arun

  • What is the exact use of statistical updates in V1,V2 and V3

    Hi,
    Can anyone answer me some questions.
    1. what is the exact use of statistial update in V1,v2 and V3. If data is same in both document update and statistical update the why u need a second table with redundant data.
    2. When BW extracts data is it recommended to extract from statistical tables or document updated tables.(i read that statistical updation is tailored for reporting)
    3. Is V3 applicable only when BW extracts data from R/3.
    4.In case of V3 the initialization of updates are done from BW side or R/3 side. i mean is there any relationship between scheduling of dataloading using an infopackage in BW and the V3 process taking place in R/3

    1. First one has to understand that R3 is OLTP system purely used for transactin processing while BW is used for OLAP ie reporting purpose only. At a table level if we do not have  a redundant second table the R3 system will be over loaded when the OLTP & the OLAP systems access the same table for their respective purposes. So we have to take data from the document table with a time lag and put into the statistical tables so that BW will get the data as and when required.
    2. This question is related to 1 and the above answers both.
    3. V3 is a generic process and is used for data extraction from the R3 transaction tables and can be used for any system as such.
    4. Both the processes are independent of each other and there is no relationship.
    Hope this helps
    Cheers
    Viva
    Assign points if this helps.

  • After running Magician app many files where deleted and after restarting I received the language portion of when you first start to set up a new Mac

    After running Magician app many files where deleted from my computer, nothing new,  After restarting I received the language portion of when you first start to set up a new Mac. Except after the language portion it went immediately to 5 options; install back-up from Time Machine, Disk Utility, Restart from start up disc, etc. I tried doing them all. Disc repair, rebooting from TM, but I don't save everything from TM I use an external HD for backup. None of those options are working for me. Now I get a grey screen with a flashing globe for so many minutes then a folder appears with a ? In the middle of it. What am I to do? Can anyone help me, please!!!

    I appreciate the extra forums you suggested I look into. I ended up forceing a Safe Mode reboot on my Mac  holding the Shift key. I let the installation process commence and I'm back to the way things were.

  • What is the difference between qued delta  update and serialized delta upda

    what is the difference between qued delta  update and serialized delta update?

    Hi Ks Reddy,
    Queued Delta:
    In case of Queued delta LUW's are posted to Extractor Queue (LBWQ), by scheduling the V3 job we move the documents from Extractor queue to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. Generally we prefer Queued Delta as it maintain the Extractor Log which us to handle the LUW's which are missed.
    Direct Delta:
    In case of Direct Delta LUW's are directly posted to Delta Queue(i.e. RSA7) and we extract the LUW's from Delta Queue to BW side by running Delta Loads. If we use Direct Delta it degrades the OLTP system performance because when LUW's are directly posted to Delta Queue (RSA7) the application is kept waiting untill all the enhancement code is executed.
    Non-serialized V3 Update:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
    https://websmp102.sap-ag.de/~sapdownload/011000358700007535452002E/HOWTOCREATEGENERICDELTA.PDF (need id)
    http://help.sap.com/saphelp_bw33/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
    Business Intelligence Performance Tuning [original link is broken]
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    How to load data
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    Delta Types and methods;�
    Hope this helps.
    ****Assign Points if Helpful*****
    Regards,
    Ravikanth

  • HT4972 What does network settings incorrect mean when updating?

    What does network settings incorrect mean when updating?

    Felipe,
    Thanks for the reply.  I was able to get it working by changing my access list from:
    ip access-list extended outside_to_inside
    permit tcp any any eq 8222
    permit tcp any eq 8222 any
    permit tcp any any eq 22
    permit tcp any eq 22 any
    to:
    ip access-list extended outside_to_inside
    permit tcp any host 192.168.10.10 eq 22
    Thanks for your help.
    Paul

Maybe you are looking for