What is there to do to make mail work with iOS6?

Since i downloaded the iOS6 gmail won't work.
Please, anybody who knows? I dont want to reinstall a new adress?

Well, adding an exchange account is what finally worked.
http://www.youtube.com/watch?v=ywMPS3VyMnc

Similar Messages

HT4623 I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

No.

Is there a way to make Silverkeeper work with Snow Leopard?

I use a computer "given" to me by my school. I do have administrative privileges, but IT installs all OS software and configures it per the network on campus. Last February, they installed Snow Leopard and I began to restore all my files from my external backup. I'd been using Silverkeeper for years, I prefer the way it works (basically, it copies all files, then, with subsequent backups, can be set to only update changed files and add new files into the backup. In other words, there is only one folder. As a designer, I have the "v1,v2" so deeply ingrained in me that I never loose the early versions of documents). In short, Silverkeeper works for me. Time Machine is an interface that does not.
So, IT installed Snow Leopard, I bring my machine home, and start bringing files over. For every single file, I had to type in my password. The drive, every folder and every document was suddenly marked as "Read Only". I tried changing permissions. Didn't stick. I repaired permissions, tried changing, still wouldn't take. I contacted IT, one of the guys opened Terminal and typed in something (he never gave me the line of code, so I can't tell you what he did. I asked him what he did, he just said, "It's ok, I just gave you full permission. Don't sweat it." I got home, tried to bring over some files, and they still asked for my password. Nothing had changed. Except that the machine started sending urgent error messages. I disconnected my hard drive, rebooted, and could not get past the grey screen.
Even longer story short, IT wiped my computer, reinstalled SL, I brought in my hard drives, they worked with them to have them all "Read Write" again, and said I had to use Time Machine as a backup. They blamed the entire mess on Silverkeeper.
So, the semester went on, I've been using TIme Machine ever since and I hate it. Hate it. I want my Silverkeeper, or some other such backup that gives me one file, and all my records kept in that file, in a visual manner. I hate these dates, with the multiple folders, and the threat that it will throw away old files (I just resurrected a file from a Quark doc made in 1994!). But IT has me too afraid to use Silverkeeper. Personally, I think something went wrong with the first install, then IT screwed it up even more by opening up Terminal and "fixing" the code, and they refuse to admit they have ever made a mistake. BTW, I've been using Macs for 22 years and have never experienced anything like this. I have done more system upgrades myself than I can remember, I have troubleshooted my own machines for years, and kept them humming beautifully.
It's summer, and I want a different backup. Please help, or let me know if I dare brave my old favorite once again. If there is a utility that I have to buy, I will. I'm so fed up and frustrated with the interface on Time Machine, I'm ready to go back to the bad old days of manual backups.

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

How can I make Mail work with iCloud in 10.6?

I was really comfortable with the Mac Mail application on my computer. I was forced to move my email to iCloud. Now I have to do all mail business on the iCloud website. What a hassle. I cannot upgrade to Lion or Mountain Lion because my bread and butter relies on programs that work best in Snow Leopard. I heard there was a way to make the Mail application continue to work in 10.6 with the new iCloud mail. Does anyone know how?

Welcome to Apple Support Communities.
This step-by-step illustrated guide from Roger Wilmut is what I used as a guide to install iCloud mail in Apple Mail 4.5 on Snow Leopard 10.6.8.
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html

Cannot make Mail work with new iMac

I have been using Mail 2.1.3 with a G5 iMac and OS X 10.4.11.
Now using iMac G5 with OS X 10.5.8 and Mail 3.6.
I cannot persuade Mail to work on the later computer. I am using the same settings as on the other computer except that I allowed the computer to set the number of the ports.
I use two email accounts in Mail. I retained my old email address when moving suppliers, so for the main one that I use most, I use the incoming server belonging to that account, but use my new supplier to send email. This works fine on the old computer. On the newer one, I can neither send nor receive.
I can of course access my email using a browser, but I much prefer using Mail.

I missed your posting til now, asked the same question here:
http://discussions.apple.com/thread.jspa?threadID=1124570&tstart=0
OS or Mini? Keyboard not fully usable (Kinesis Ergo MPC)
at
Mac OS » Mac OS X v10.4 Tiger » Tiger Forums » Installation&Setup, Sep 10, 2007
It seems it's an OSX 10.4 problem. It was fine for years (still is fine) on my G3 "Pismo" with OSX 10.3.9.
I'll add to my topic if I find anything. I've found people writing about hacking Apple's keyboard files, but am still trying to figure out if anyone's solved this.

Is there any way to make Mail open next message?

Is there any way to make Mail open the next message on the inbox automatically after deleting, forwarding o saving a message?
I mean, is there any way to, after reading a message, going to the next or previous message without double clicking the main inbox window?
I used (on windows) to read mail on outlook, or even on entourage for mac, and after I read a message, even if I deleted it, forward it, replied it, or even saving it on a folder, automatically the program (outlook, entourage, hotmail, etc) opened the next message on the inbox, but I am not able to find any way to make Mail do that.
Is there a way to it? Or should I provide suggestions to Apple?
By the way, no meant to prefer microsoft for this, I just think this is a cool feature for reading several messages one after another without going back to the main inbox page and double clicking the message to read...
Thanks for any help

Down-arrow, Return. Return opens the selected message. I read through hundreds of messages without ever touching the mouse. Once you get used to the keystrokes, Mail is extremely efficient.

What program do I use to make mailing labels?

I can no longer use Apple works for my mailing list. What program should I get to make mailing labels, and how can I convert my old .cws databases to create mailing labels?
Extremely frustrated with OpenOffice!!!

I could not convert the database file from Appleworks, but I did get LibreOffice which is a free program, and it does open the old Appleworks files, and will convert them to .csv which can then be imported into "Contacts". (create your new group in Contacts first, and import it into that) LibreOffice might be able to convert into mailing labels, but I sure couldn't figure it out. So I had to pull the .csv file into "Contacts". Then from the print window, I can choose the options to print labels and it works.

Is there any way to make Mail forget previous search terms?

When I search for a mail starting with say, the letters 'and' it finds every email to, from or whatever associated with those three letters. However, it includes, in the cases of to or from, old email addresses that are no longer in 'Contacts' and or have bad memories for me. Is there any way to make 'Mail' forget those email addresses completely?
This is not or does not seem to be the same as removing an email address from the previous recipient list.
Thanks.

Hmm. This removes the recipient only in such a way that when I type the first 3 letters of an address in a new email, that particular recipient does not appear.
However, if the same first three letters of the addressee's name are typed in the Mail search function, the previous recipient's email address is still offered as an option. So I am afraid this does not help.
Removing a previous recipient's email address is apparently not the same as making the Mail application forget a particular email address.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.

Are there pepes out there using ipads to make group music with children who have profound and multiple learning difficulties? I am and I'd love to share the ideas.
I am the music teacher in a Special school in London UK currently working with Drake Music who are a charity that go into schools to enable music making through music technology. Our purpose is to enable a group of 7 children who have profound and multiple learning difficulties to play instruments on the ipads or through the soundbeam and to be able to play and jam together with me underscoring on the guitar. We're having a lot of fun and we're all learning a lot about what can be achieved using the amazing ipad technology. If you're doing a similar project I'd love to hear from you and we can swap notes!

See Recover your iTunes library from your iPod or iOS device.
You can use iTunes to easily manage multiple devices by having each sync with selected playlists. I don't personally have any recommendations for other software but perhaps others might.
tt2

Is there a way to make itunes autostart with windows in mini mode

Is there a way to make itunes autostart with windows in mini mode i.e the taskbar player mode where it is most less obstrusive . itune takes a lot of time to start under windows

Just delete the same songs from your library in iTunes. Select the first song, hold the shift key, select the last song (which will select everything in between) and press delete.

Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

NI have a Braun Photo Technik slidescan 3600 and it canot make it work with Lion: Is there anybody who sorted out the same problem? thanks

I have a Braun Photo Technik slidescan 3600 and I cannot make it work with Lion. Is there anybody who sorted out the same problem? thanks

We sure do have a problem - this is strictly a user to user assistance forum with users helping other users use the iPhoto program as it is - no one here has any ability to change or influnence the desigh or implementation of iPhoto
try the iPhoto menu ==> provide iPhoto feedback
LN

What is the correct setting to make facetime work

are there certain settings to make facetime work? My iPad will ring, but not connect.....HELP !

There has been a lot of problems reported with FaceTime today. If the problem just started give it a day or two to see if the problem has been fixed.

Is there a security surveillance system that works with a MacBook Pro or iPod touch?

Is there a security surveillance system that works with a MacBook Pro or iPod Touch?

Problem is most vehicles can't supply enough power to charge a MacBook Pro battery, not without placing a generator in the engine compartment someplace like police cars and campers have.
Apple provides the MagSafe Airline Adapter but it's designed for 15V, not the 12V of vehicles, then it's only to keep the battery from discharging on airplanes, it won't charge it.
http://store.apple.com/us/product/MB441Z/A?fnode=MTY1NDEwMQ&mco=MTA4NDE2Mjc
"It's designed for 15V DC that you find on airplanes. If you are the DIY type, you can make your own 15V DC automotive socket by using an automotive universal laptop supply to step up the car's 12V to 15V"
I found this online:
http://www.365laptop.us/product_info.php?language=en&currency=USD&products_id=10 64
Notice the device says:
"Input: 11-14V DC 8Amp MAX " - Cars are 12V DC.
Output: -DC 15V.... the same as the Airline Adapter
Looks like one needs to cut and splice the two parts/wires one needs together.
This 12V to 15V conversion is a lot better/streamlined than trying to upconvert 12V DC to a whopping 120 AC and then your Mac's power brick is downconverting 120AC to what it needs in DC to try to charge the battery which the vehicle can't supply the wattage for anyway.
Apple has a patent on the MagSafe adapter, they don't provide a 12V to 15V converter + MagSafe adaptor for the car. It would be nice if they did though.

Can i make this work with a number specified in the constructor?

Hi everyone
I posted a couple of days ago and i have managed to advance a bit since then.
Here i have a class called "flower" and it draws a flower with two leaves and 12 petals using the classes "petal and "leaf".
However, ideally i would like to be able to make this work with a number of petals specified in the constructor, not just 12.
is this possible or do i need to rewrite the entire class?
import java.awt.*;
import java.awt.geom.*;
public class flower {
    private Shape circle;
    private Shape stem;
    public flower()   {
        circle = new Ellipse2D.Double(-25, -25, 50, 50);
        stem = new Line2D.Double(0.0, 0.0, 0.0, -200.0);
    public void paint(Graphics g) {
    Graphics2D g2 = (Graphics2D)g;
    g2.setPaint(Color.green);
    g2.setStroke(new BasicStroke(5)); // Line width 8 pixels
    g2.draw(stem);
    // Add the petals
    petal P = new petal(Color.red);
    // Scale, translate and rotate the petal into place.
    AffineTransform orig = g2.getTransform();
    AffineTransform T = AffineTransform.getTranslateInstance(0.0, -25);
    for (int k = 0; k < 12; k++) {
      double angle = k*Math.PI/6.0;
      AffineTransform A = AffineTransform.getScaleInstance(1.0, 1.0);
      A.preConcatenate(T);     // Scale, then rotate
      AffineTransform R = AffineTransform.getRotateInstance(angle);
      A.preConcatenate(R);     // Scale, translate and then rotate
      g2.transform(A);
      P.paint(g);
      g2.setTransform(orig);     // Restore original transform
      g2.setPaint(Color.yellow);
      g2.fill(circle);
      leaf L = new leaf();
      AffineTransform B = AffineTransform.getTranslateInstance(0.0, 0.0);
      B.translate(340, 425);
      B.scale(1.0, 1.0);
      B.rotate (Math.PI/6);
      g2.setTransform(B);
      L.paint(g);
      g2.setTransform(orig);     // Restore original
      leaf L1 = new leaf();
      AffineTransform C = AffineTransform.getTranslateInstance(0.0, 0.0);
      C.translate(285, 430);
      C.scale(1.0, 1.0);
      C.rotate (Math.PI/-6);
      g2.setTransform(C);
      L1.paint(g);
      g2.setTransform(orig);     // Restore original
}I am tempted to make "flower into a class that extends "petal" would this make it easier for me to achieve my goal?
Any help would be great
Thanks Carl

Your NewFlower class extends petal. You NewFlower constructor calls super( color, petnum ), so the petal constructor is invoked. In the petal constructor, you ignore petNum. You do nothing else in the NewFlower constructor, so petNum is ignored there as well.
What makes you think that in this orgy of ignoring petNum, that any petNum variable will magically get set, or that your flower will now magically have the right number of petals?
� {�

What is there to do to make mail work with iOS6?

Similar Messages

Maybe you are looking for