What is theTable to find status record information in an idoc
what is theTable to find status record information in an idoc
hi dheepak ,
To see the list of field in the status record , use the table EDIDC in the se11 , it ill shoe the table structure online.
For complete documentation of the STATUS record , you can view using Transaction <b>WE61</b>.
Similar Messages
-
10.10.3 Finder Status Bar information is wrong, TB not GB
Have you noticed how the 10.10.3 Finder Status Bar information is wrong and it shows Terabytes left on a drive of 750 GB after update. See attached. This is not possible
There's something wrong with your hard drive. Or you have Time Machine enabled and all that space is taken up by backup snapshots. I would do the following:
Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu. -
How to find the sender information from a IDOC
Hello Colleagues
I have a list of IDOCs which are transferred by by ALE and EDI methods, the customer idocs are using EDI and internal buyers use the ALE technology.
I have to write a report which tells me which was the originating system/ source of the order, so I wanted to know is there a way that I can find the origin system of the idoc message.
I had a look into EDIDC but the sender port here is a self pointing RFC for the edi messages, any idea how to get the origin system here ?, however the ALE messages gives the correct sender. But in future we are planning to have XI for internal transfer for idoc will that also have the same problem.
Best regards
SujoyHi ,
you can find receiver system details in partner profile , transaction we20.
the sender system details are
port = SAP+your systemID(can be found in login system details)
EX if i am using ides server(testing server) having system id ESR then port = SAPESR
partner number u can get by following the path
sale...>basic settings...>logical system....> assign logical system to client.
here you can find the logical system which is nothing but your partner number for a particular client.
Hope this helps you.
Thank you.
Regards,
Lokeswari. -
Internet problems what / where do i find the port information?
I just got the latest iPad A1416. Now for the internet. We just got new wireless boxes 2 it's NETGEAR.
I know the name and password of the new routers.
So now what?
Please help me.
Thanks.iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Status Record Error 51 in IDOC , Message no. B1252
Hi,
I have the follwoing error Function module not allowed: YPS_IDOC_INPUT_PROJECT
Message no. B1252
Diagnosis
The function module YPS_IDOC_INPUT_PROJECT and the application object type BUS2054 which were determined are not valid for this IDoc.
Procedure
1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.
Please help me out .
the process code is YNSNPSHi,
check whether WE42 whether the message type is assigned to the process code correctly.
You could also try process code "BAPI" which is for individual IDOC processing. Msg type ARTMAS is also assigned there.
Regards,
Kai
Edited by: Kai Lerch-Baier on Jul 29, 2009 3:10 PM -
Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.
Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…
-
I deleted some phone records (call numbers, dates) & texts. Can I access them from back-up without restoring the phone. Don't want to alter what I have, just find what I later deleted
Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud. -
Some question on IDOC (Control Record/Data Record/Status Record)
Dear all,
I am new in this area, and would like to enquire some question on this topic.
When I view a IDOC via WE02, each of the IDOC record will consist of Control Record/Data Record/Status Record).
Questions:
I notice that the data records consists of many segment (i.e. E1EDK01, etc) which are use to store application data.
1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
Thanks.
TuffHi Tuff,
As everything in SAP, with IDOCs too there are
1) Standard IDOCs
2) Standard IDOCs(Extending - Enhancement to an IDOC, to accomodate for custom values)
3) Custom IDOCs
And every IDOC has,
Control record - EDIDC Structure - This mostly reflects the partner profile information, along with few more details which are used for IDOC extension, Sequencing etc
Data Records - EDID4 Structure - These records contain the actual business data of the document in concern. So for ORDERS05 it would contain order details, INVOIC02 - Invoice details so on...
Status Records - These records capture the status of an IDOC from the time it is received/sent from your system and a corresponding business document is created/changed. So this will have messages like "IDOC sent to the port OK" etc which are status from the communication layer(ALE) to application specific messages like "Sales Order XXX created" or "Invalid Material" etc.
You would have noticed something called as Process code in the partner profile, this is associated with a FM(or work flow task etc) which has the business logic coded in.
So in case of an Inbound IDOC, the sending system updates the IDOC - Control and Data records, and sends it to the receiving system. On the receiving system the IDOC's control record is validated against the partner profiles set, if an entry is found then using the process code it finds the associated FM which will decode the data from the IDOC data records as per the IDOC type and then use it to post data into SAP (VIA BDC, Batch Input, BAPI etc).
And all this while the Status records are being updated accordingly.
So with the above context will try to answer your questions,
1 - My question is do I have to manually create all these segment and do a mapping to my application field one by one (i.e. that is when I want to create a brand new message type from scratch)?
In case of a custom IDOC, yes you will have to.
In case of a standard IDOC, you wouldn't have you just have set up the necessary configuration (Partner Profile, Process code etc)
In case of a standard IDOC extended to accommodate for some custom values(for which there are no fields in standard IDOC - Let us say you have added some new fields on VA01) - In this case you can still use the standard Process code and Standard FM associated with it, SAP provides several Function exits in these FM's which you can leverage to add your custom logic.
2 - If question no. 1 is Yes, how to do it, what are the transaction code to create it? can you show me the step by step.
There are several documents available on the net and on SDN detailing step by step approach for all the above three cases,
just search for step by step guide for IDOCS - sap.
3 - I don't have to create the Control record and the status record for my new message type right ? because those field value will automatically pull out from partner profile and system status message, am I correct?
Again it depends, in case of using a standard IDOC you wouldn't have to. But in case you have some customizations/enhancements then you might have to.
For Ex: updating the control record accordingly for indicating that you have extended the standard IDOC. Or append custom messages to the status record as per the business logic.
Try out the examples you find on the net and post any specific questions you might have.
Regards,
Chen -
I bought my iphone 4s in usa apple store
ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
i want to support for this issue.
but when i write my serial number to support center i see warning like that. What is the problem ?
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.Nobody here would know. Contact Apple and ask them
-
Hi SDNites,
I wanted to know that the Idoc contains three components... Control record, Data Record and Status record. Which table contains all the status records like 54,53,03. What I mean to say is the table EDIDS gives the status of the particular Idoc with Idco number being the key field but where will i find as to which status stands for what? Like 53 stands for success. How do I find this out??? Kindly help.
Thanks & Regards,
Nehal.hi,
an IDoc is assigned a two digit status for monitoring of the process.
as you have already mentioned table EDIDS maintains the status records.
status for outbound IDocs are btw '01' and '49' and for inbound IDocs '50' onwards.
to find out what each status msg means you have to go into customization.
goto tran. spro.
sap netweaver->application server ->IDoc Interface/Application Link Enabling->System Monitoring->Set IDoc Status Display
here you can find the text for all the status.
hope this helps,
cheers,
Rakesh.. -
Help with Finding Duplicate records Query
HI,
I am trying to write a query that will find duplicate records/cases.
This query will be used in a report.
So, here are the requirements:
I need to find duplicate cases/records based on the following fields:
DOB, DOCKET, SENT_DATEI was able to do that with the following query. The query below is able to give me all duplicate records based on the Criteria above
SELECT DEF.BIRTH_DATE DOB,
S.DOCKET DOCKET,
S.SENT_VIO_DATE SENT_DATE, COUNT(*)
FROM SENTENCES S,
DEFENDANTS DEF
WHERE S.DEF_ID = DEF.DEF_ID
AND S.CASE_TYPE_CODE = 10
GROUP BY DEF.BIRTH_DATE, S.DOCKET, S.SENT_VIO_DATE
HAVING COUNT(*) > 1;
//I AM GOING TO CALL THIS QUERY 'X'Now, the information to be displayed on the report: defendants Name, DOB, District, Docket, Def Num, Sent Date, and PACTS Num if possible.
The problem that I need help on is how to combine those queries together (what I mean is a sub query). the 'X' query returns multiple values. please have a look at the comments on the query below to see what I'm trying to achieve.
here is the main query:
SELECT INITCAP(DEF.LAST_NAME) || ' ' || INITCAP(DEF.FIRST_NAME) || ' ' || INITCAP(DEF.MIDDLE_NAME) DEFENDANT_NAME,
DEF.BIRTH_DATE DOB,
TRIM(DIST.DISTRICT_NAME) DISTRICT_NAME,
S.DOCKET DOCKET,
S.DEF_NUM DEF_NUM,
S.SENT_VIO_DATE SENT_DATE,
DEF.PACTS_ID PACTS_NUM
FROM USSC_CASES.DEFENDANTS DEF,
USSC_CASES.SENTENCES S,
LOOKUP.DISTRICTS DIST
WHERE DEF.DEF_ID = S.DEF_ID
AND S.DIST_ID = DIST.USSC_DISTRICT_ID
AND S.CASE_TYPE_CODE = 10
AND S.USSC_ID IS NOT NULL
AND // what i'm trying to do is: DOB, DOCKET, SENT_DATE IN ('X' QUERY), is this possible ??
ORDER BY DEFENDANT_NAME; thanks in advance.
I am using Oracle 11g, and sql developer.
if my approach doesn't work, is there a better approach ?
Edited by: Rooney on Jul 11, 2012 3:50 PMIf I got it right, you want to join table USSC_CASES.DEFENDANTS to duplicate rows in USSC_CASES. If so:
SELECT INITCAP(DEF.LAST_NAME) || ' ' || INITCAP(DEF.FIRST_NAME) || ' ' || INITCAP(DEF.MIDDLE_NAME) DEFENDANT_NAME,
DEF.BIRTH_DATE DOB,
TRIM(DIST.DISTRICT_NAME) DISTRICT_NAME,
S.DOCKET DOCKET,
S.DEF_NUM DEF_NUM,
S.SENT_VIO_DATE SENT_DATE,
DEF.PACTS_ID PACTS_NUM
FROM USSC_CASES.DEFENDANTS DEF,
SELECT *
FROM (
SELECT S.*,
COUNT(*) OVER(PARTITION BY DEF.BIRTH_DATE, S.DOCKET, S.SENT_VIO_DATE) CNT
FROM USSC_CASES.SENTENCES S
WHERE CNT > 1
) S,
LOOKUP.DISTRICTS DIST
WHERE DEF.DEF_ID = S.DEF_ID
AND S.DIST_ID = DIST.USSC_DISTRICT_ID
AND S.CASE_TYPE_CODE = 10
AND S.USSC_ID IS NOT NULL
ORDER BY DEFENDANT_NAME;If you want to exclude duplicates from the query and do not care which row out of duplicate rows to choose:
SELECT INITCAP(DEF.LAST_NAME) || ' ' || INITCAP(DEF.FIRST_NAME) || ' ' || INITCAP(DEF.MIDDLE_NAME) DEFENDANT_NAME,
DEF.BIRTH_DATE DOB,
TRIM(DIST.DISTRICT_NAME) DISTRICT_NAME,
S.DOCKET DOCKET,
S.DEF_NUM DEF_NUM,
S.SENT_VIO_DATE SENT_DATE,
DEF.PACTS_ID PACTS_NUM
FROM USSC_CASES.DEFENDANTS DEF,
SELECT *
FROM (
SELECT S.*,
ROW_NUMBER() OVER(PARTITION BY DEF.BIRTH_DATE, S.DOCKET, S.SENT_VIO_DATE ORDER BY 1) RN
FROM USSC_CASES.SENTENCES S
WHERE RN = 1
) S,
LOOKUP.DISTRICTS DIST
WHERE DEF.DEF_ID = S.DEF_ID
AND S.DIST_ID = DIST.USSC_DISTRICT_ID
AND S.CASE_TYPE_CODE = 10
AND S.USSC_ID IS NOT NULL
ORDER BY DEFENDANT_NAME;SY. -
Not able to find erroneous records in psa
hi sdn
In monitor I have some records for which bw is saying that these records are having invalid characterstic but unfortunately when i'm seeing in psa table i'm not able to find them out,
can some body give me the clues regarding this
rubaneHi
Have you did what i suggested
Select the PSA record. Open all the records. Now select the status column by pressing the header. Now press the sort button. red requests all will be in the bottom of the data record set.
Check in the monito detail list which PSA data packet is having errors. All PSA data packets will not have errors . Only a few data packets will have error records. Select that data packet and do what is suggested
To find out which data packet is having error see the detail screen of the monitor and open all the messages there in the transfer rules
Regards
N Ganesh -
hi all,
tell me the steps how to find a record in PSA.suppose there are >20 data packages..how can i find out that specific record from those datapackages with out knowing datapackage..
thanks,
jackHi Jack,
It so happens that when data is pulled into the PSA there will be no specific order. Hence it is impossible to know which record is present in which data package.
But if you want to know how many error records are there and what are those there are always options of selecting all the packets and display only erraneous records.
Regards,
Pramod -
From what table I can find the field STTXT?
From what table I can find the field STTXT (Description of maintenance status)?
Regards,
SubhasishHello,
Have a look at thgis thread.
what is STATUS_TEXT_EDIT function
Vasanth -
Report to display all the status records of an Idoc
Hi,
I need to find out all the status records for an idoc and display them as a report. Is there any existing SAP Report that does that. I checked in table edids and all the status records of the idoc are not stored in the status text which is empty althogh there are 12 counters for the idoc.
regards
AveekHey Aveek;
Try this, which will get the most recent one. You would just need to change it to loop at the edids records to get at them all...
TABLES: *edidc, *edids, *t100.
DATA: wf_string type string.
CLEAR *edids.
SELECT SINGLE *
INTO *edids
FROM edids
WHERE docnum = *edidc-docnum
AND status = '51'.
SELECT SINGLE text
INTO *t100-text
FROM t100
WHERE sprsl = 'EN'
AND arbgb = *edids-stamid
AND msgnr = *edids-stamno.
CLEAR wf_string.
MOVE *edids-stapa1 TO wf_string.
REPLACE '&' WITH wf_string INTO *t100-text.
IF sy-subrc EQ 0.
CLEAR wf_string.
MOVE *edids-stapa2 TO wf_string.
REPLACE '&' WITH wf_string INTO *t100-text.
IF sy-subrc EQ 0.
CLEAR wf_string.
MOVE *edids-stapa3 TO wf_string.
REPLACE '&' WITH wf_string INTO *t100-text.
IF sy-subrc EQ 0.
CLEAR wf_string.
MOVE *edids-stapa4 TO wf_string.
REPLACE '&' WITH wf_string INTO *t100-text.
ENDIF.
ENDIF.
ENDIF.
A little sloppy (OK, alot!), but it gets the job done...
Cheers,
John
Maybe you are looking for
-
Dreamweaver CS4 Lightbox Gallery Problem
Hello Everyone, I am using Dreamweaver CS4 on a Mac and I am a beginner at producing my website, just so you know. I am using lightbox gallery for my photo gallery on my website and everything works fine except that when you click on the picture to
-
How to solve "code of constructor" error in webdynpro
hi everyone, i had developed one application(1 poject)in webdynpro with more than 90models added to that..... approximately 90-100 webservices models to it.....and using single component controller.....as i cannot use EP, i am integrated all my views
-
HT2534 Removal of Payment Method
I am trying to remove my credit card from the iTunes store but when I go to payment method the "None" payment button is not appearing and it won't show up. How am I suppose to remove my credit card?
-
Trying to install Photoshop CC. Insuffient space on C:/.
I have now changed the directory to another drive but it still dumps large temp (?) files in C: and I get an error message (X10). I'm running Win7 and had no problems installing the whole Cs6 design premium package. How can I get around this? I can't
-
I am using Window 7 I have just put a link to my web site but it does not appear while using Firefox but it does if using Internet explorer or Chrome why would this be? It does appear on a friend's computer using Firefox. Barossa Vintage Festival ...