What is this and what updates would I use?

Hi all,
Just bought a Gateway system based on the Intel i7 - 920 chipset, ATI HD49850 video and many other things...
The audio that comes with it is very confusing.
In the systray there are TWO audio panels. The first is for the Realtek HD audio. The second is for something called the Creative X-Fi MD audio.
In the system manager it shows two audio hardware entries, Realtek and ATI (from the video card).
It does not show anything for Creative. Yet, the creative control panel handles all the excellent audio controls and effects for the machine and without it, I do not get access to any of the high end sound.
So what is this? Is the hardware Realtek or Creative and why or what is the difference here between the two? Based on the ports on the back, this appears to be built into the mainboard and since I have not opened the machine yet I cannot tell much about the hardware layout.
The questions come about because this machine has built in hot swappable hard dri've bays for E-SATA and SATA. Awesome feature!
And while working on making sure all drivers were current, I wanted to update all audio as well but I have no idea what I should be looking for now in terms of drivers. Checking the Creative drivers area shows no entries for the X-Fi MD whatever that is. Thus the only drivers I currenly have are the ones that came with the machine, which when installed again do so via the full Creative installer. It fully supports and installs Alchemy and all other tools.
So if you are confused by all this, join the club... Anyone know anything about this?
BTW, this machine is fast and loaded with features.. I recommend it big time.

stretchtee wrote:
I cannot figure out how to delete it the normal ways.
As in holding the app untill they wiggle?

Similar Messages

A simple percentage? How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

How does one add a percentage to a number? If I have 100 and I want to add 15% and get a total, what formula would I use?

You can do something like this:
D2=B2*(1+C2/100)
this means in the cell D2 type the following "=B2*(1+C2/100)"... leave out the double quotes

Our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

Just use the same one on all devices.

Hey what program would you use to make Kinetic Typography

What program would i use and if there is one please post the link for it thanks

I found this thread, you may find it helpful:
https://discussions.apple.com/thread/2302254?start=0&tstart=0

What program would I use in creative cloud to search a large audio file for sounds.

I have sleep apnea and want to search large audio files for my snoring. what program would I use and any other tips would be great.
thank you

Moving this discussion to the Audition forum.
VTX1300C Audition is the sound editing program included with your Creative Cloud Membership. The users in this forum may have some additional Audition specific tips or an alternate workflow which you can utilize.

What command would you use to check for allocation, structural, or logical integrity problems?

What command would you use to check for allocation, structural, or logical integrity problems?

Wondering if you are looking for DBCC CHECKDB command? For more information, on that command, try to look at this:
http://technet.microsoft.com/en-us/library/ms176064.aspx

HT4623 Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i do

Hi, Im using an iPhone 4 8gb and recently updated my software using my computer to iOS 6.1.3 and some of the tabs are now grayed out and cant function (specific reference to "Show My Caller ID - On/Off tab"). is there a way to fix this or can i downgrade back to my default software?

Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff.

What api would I use to get the number of chars in string?

What api would I use to get the number of chars in string?

Assuming that you really mean that you want the number of charaters in a String (not string), that would be documented in java.lang.String
The method is length()

What behavior would I use to make a bitmap image shake? Thanks.

What behavior would I use to make a bitmap image shake? Thanks.

There are several options for making images (or any object) shake:
-Earthquake Filter
-Randomize Behavior (Parameter Behaviors)
-Wriggle Behavior (Parameter Behaviors)
You can apply these to the X&Y together, or 1 instance to each channel.

What app would I use to create an online report like this?

What Adobe CC app would I use to create a web based report like this?
http://sowc2015.unicef.org
Could it be done with Muse or does it need something like Dreamweaver and bespoke coding?

HI,
Yes, you can create such site using Adobe Muse. You will need anchors points to scroll down. You can take a look this article
http://www.lynda.com/Muse-tutorials/Understanding-anchor-links/161871/179008-4.html
Do let me know if you have any question.

What function would you use instead of "IF" when referencing durations from a pop-up menu. Ie; if c4 equals 1h enter 280, if c4 equals 30m enter 160, etc. IF works fine if c4 is formatted as text but returns 0 when formatted as pop-up.

What function similar to IF would one use when the reference cell is a pop-up menu of items in duration format?
Example: if C4 equals 1h enter 280, if C4 equals 30m enter 160, etc
i can get it to work fine if I format the cell to text but I not only need it pop-up, I also need it to be written in duration format because it's used as duration in other functions.
thank you for your help in advance
Christina

Hi Christina,
A screenshot is always helpful.
C4 is your popup? You want to chose a duration there and have 280 or 160 show up somewhere else? Are they the results of a mathmatical formula or do you want a lookup table to show them?
I suspect something else is going on in your table. I have no trouble having a popup recognized as a duration:
The formula in C2 =DUR2MINUTES(B2) displaying "60" as expected. Note that "60" is not a duration. If I want C2 to be a duration I need the formula to read:
=DUR2MINUTES(B2)&"m".
I hope this helps, if not, post a screenshot including relevant formulas.
quinn

I purchased a PDF Pack last November and I'm having problem combining pdf files into one with the subscription that I purchased. I have no idea why it's not doing this and therefore I would like to cancel the subscription. There is no other way of commu

I purchased a PDF Pack last November and I'm having a problem with combining multiple pages into a single PDF file. Please let me know why this is otherwise I would like to cancel the subscription

Hi aspenavenue,
I've checked your account, and there are no issues there. What happens when you try to combine files? Do you get an error message? I would love to help, if possible.
Best,
Sara

What equation would I use...

I appreciate the help on this question. I am an attorney I would like to develop a spreadsheap in Numbers (and Pages) that does the following simple thing:
Column B would have a retainer figure. Say $1000 for the first entry.
Column C would have my total running for the month. At the first entry that would be $1000.
Column B, row 2, would have 1500 for my next retainer. Column C, row 2, using an equation would have the new figure of $2500. Also, Column C row 1 would retain the previous total of 1000.
Column B, row 3, would have 500 for my next potential retainer. Column C row 3 would automatically, using an equation, would have the figure of $3000. The previous rows in column C would retain the previous totals.
What equation or formula would I use to populate column C with a running total?

=SUM($B$1:$B1)
Put that in C1 and then copy it down the column. C2 should have the exact same formula except the last B1 is now B2, and likewise down the table. You're telling it to start at B1 for each entry, but to stop at the row in B that is identical to that row in C.
Vince

What script would I use for a timesheet using 12:00 am?

I have been able to add a document level script using Acrobat Pro to show midnight as 12:00 am. But my calculations still don't work. As I have it scripted right now a start time of 12:00 am and an end time of 1:00 am equals -11.00 hours not 1.00 hour. What script would I have to add so the calculation is correct?
Here is the script I have right now:
// start time
// Start time field name
var cStartName = "start1mon1";
// Start time format:
var cStartFormat = "HH:MM";
// end time
// end time field name
var cEndName = "end1mon1";
// End time format:
var cEndFormat = "HH:MM";
// some conversion functions
// function to convert time string to minutes
function Time2Num(cTime, cFormat) {
// convert time string to minutes
// convert time string to date object
var oDate = util.scand("mm/dd/yyyy " + cFormat, "01/01/1970 " + cTime);
// convert date object to number of milliseconds
var nTime = oDate.getTime();
// convert milliseconds to minutes and return value
return Math.round(nTime / (1000 * 60));
} // end Time2Num function
function Num2Time(nMinutes) {
// convert time string to Hours and Minute
// hours in nMinues
var nHrs = Math.floor(nMinutes / 60);
// remainder minutes from hours in nMinutes
var nMins = nMinutes / 60;
// return formatted time string
return nHrs, nMins;
} // end Num2Time
// end conversion functions
// perform the calculation using the fields:
// get the values of the fields
var cStartTime = this.getField(cStartName).value;
var cEndTime = this.getField(cEndName).value;
// clear the value
event.value = "";
// test for not null time strings
if(cStartTime != "" && cEndTime != "") {
// compute the time difference in minutes
nDiff = Time2Num(cEndTime, cEndFormat) - Time2Num(cStartTime, cStartFormat);
event.value = Num2Time(nDiff);
} //end not null values
I have no prior knowledge of JavaScript, only what I have found here on the forums and a lot of luck. I would appreciate help on this problem. Thanks!

Thank you Gilad D, that worked making a hidden field and just creating the subtraction for the break with that field! But for future reference if anyone else comes across this question, this is what I used for the time without subtracting the break.
// Get first field value
var v1 = getField("Finish Time 1").value;
//Split field value
var time1 = v1.split(":");
// Get second field value
var v2 = getField("Start Time 1").value;
//Split field value
var time2 = v2.split(":");
var min1 = time1[0]*60 + time1[1]*1 //
var min2 = time2[0]*60 + time2[1]*1 ;
event.value = ((min1 - min2) / 60) ;
If anyone know how to add a break into this script, have at it! But creating a hidden field with the answer of the above script and then creating another box that takes that number minus a break worked good.

What software would I use to make an ios app?

What software could I use to make an IOS app?

Apple's IDE, Xcode.
See Xcode Versions ~ iOS - As of 9.19.12

What is this and what updates would I use?

Similar Messages

Maybe you are looking for