What is this button?

I was playing around with my iPod touch 4th generation earlier and I noticed a new button I have never seen before when I was playing music. The button looked like a triangle and behind was a rectangle. The button was placed next to the Fast forward/Next Song button. When i touched the button, it showed me 4 different wireless networks and when I touched one wireless network the music didn't stop, but it I didnt here sound. when I pressed the button that said "Ipod Touch" I heard the music again. Can someone please tell me what this button is and what it does?

Here's a link to AirPlay on the AppleTV.
http://www.apple.com/appletv/#airplay

Similar Messages

What does this button on my keyboard do?

There is a button on my computer keyboard; at the top-left of the numeric keypad, just below the reduce-volume button; it's like a parallelogram with a big cross (X) through it. - What does this button do? - I can't seem to find a use for it.
Also, while we're talking buttons, the buttons above the arrow keys seem to correspond to Home, End, Page Up, and Page Down on PC's, but they seem (annoyingly) to perform slightly different functions. - Any explanations?
And finally, I know you can get a hash symbol using various modifier-key combinations, but it's so much simpler on a PC when you can see it above the 3 number. (Especially on a music computer when you need it frequently as the sharp sign).

I've found it interesting to learn that on some Apple keyboards, the button in question has the word "clear" marked on it (and nothing else).
My button doesn't have 'clear' on it, or any words, just this symbol of a crossed-out parallelogram. (It's in exactly the same place as the 'clear' key, but performs no delete function that I can tell).
I can't find a good picture, but you can sort of make it out here:
http://homepage.mac.com/noodlenick/GarageSaleImages/GarageSale_116276558123051.jpg
Doesn't anyone know what it does?

What's this button on HP G60 235DX?

i have a hp g60 235dx notebook...under the space bar and above the mouse pad, there is a thin small button that is illuminated constantly...i was wondering what this button does...can't find the info anywhere..

Hi,
Here is a link to the Notebook Tour for your notebook. It shows what all components (buttons, switches outputs and inputs) on your laptop are for.
This should answer your question beyond a doubt.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

What is this button / tool / feature ?

After upgrading Firefox to v.29, next to the new Open Menu button there is what at first sight appears to be a blank space but which on closer inspection has six grey dots forming a triangle in the lower right hand corner, giving it the appearance of a resizing tool. By clicking and dragging on it, I can change the width of the Firefox window, in just the same way as clicking-and-dragging on the right border of the Firefox window. If I right-click on it and choose "Remove from Toolbar" it disappears, but reappears as soon as I restart Firefox.
Is this simply a redundant resizer (or, more accurately, "re-widther")? If so, is there any way to get rid of it?

The image is very small that I almost deleted it. Can you possibly take a bigger screenshot?
Can you give me a screenshot so I know what you're seeing? Please see [[How do I create a screenshot of my problem?]] to create a screenshot 
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Can you start by giving us the troubleshooting information from the Firefox installation that's having problems. This is an essential step in troubleshooting. 
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the sub-menu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

On the side of my macbook pro, there is a round button with dots beside it. What is this?

What is the button on the side of macbook pro. There is a bunch of dots beside it that look like possible lights? What does this button do? and Should i touch it or not?

It's a battery meter.
You can press the button whenever you want to see the current status of the battery charge.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

What's wrong with this button code

Dear All,
I am trying to set up a button handler for many buttons
rather just one. The
intention of this code is to say if I press Load1 to Load40
that button and
only that button's alpha should change to 50%. This code
makes them all 50%
alpha when the frame loads rather than on the onPress event.
Can someone please help me out with this one?
i = 0;
while (i<40) {
this["Load"+i].onPress = btnEvaluate(this["Load"+i]);
++i;
function btnEvaluate(target_btn:Button) {
target_btn._alpha = 50;
Thanks again.
Alastair MacFarlane

kglad,
Thanks again. What would this group do without your help.
Alastair
"kglad" <[email protected]> wrote in message
news:gh0sq0$cbv$[email protected]..
> :
>
>
>
> for (var i = 0;i<40;i++) {
> this["Load"+i].onPress =function(){
> this._alpha=50;
> }
> }

My Power Mac G4 booted from an OS 9.1 install CD, and then froze up. Now I turn the machine on, beeps 3 times, power button blinks 3 times. What does this mean?

I tried to install Mac OS 9.1. I turned the computer on, heard the bong noise (although with some static), and inserted the OS 9.1 installation CD. It started to boot, but froze up. I rebooted the machine, and the same thing happened. One more reboot, and i get 3 beeps and the power button is blinking. What does this mean?

Hi, it indicates a RAM problem, (or Logic Board around the RAM).
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/ht1547

What does this mean? I cloud button said-.

What does this mean? When i click on i-cloud button on the top of window, it said: I-cloud automatically shows all the open tabs on the other device.
Thank.

Hi Susan,
I am afraid not.
I have the same iCloud ID on both the Mac and the iPhone.
I have the Safari item enabled in iCloud on both.
The cloud button does not work on the Mac and has only once worked on the iPhone.
Currently I can see neither device's open tabs one the other.
EDIT !!!!
Found it.
In that first pic (above but today's date) is a Private button.
It needs disabling for the Mac to "see" the iPhone's tabs
THEN the use the Double Squares and flick up the tabs which will then reveal the linked Computer (or other Device I presume
Example on Mac.
The Privacy button is not mentioned in the Link and it was only chance that I pressed it to see what it did.
9:13 pm Thursday; February 20, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

The loading bar at the bottom of my browser has disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the lastest version of Firefox 3.6.3 and Windows XP.

The loading bar at the bottom of my Firefox browser has suddenly disappeared and I want to reinstall or reactivate it. How do I do this please and what is this bar called? I use the latest version of Firefox 3.6.3 and Windows XP. I have many add ons and I usually automatically install the recommended updates. This problem has never happened before and switching my browser on and off again does not solve the issue.
== This happened ==
Every time Firefox opened
== I am not sure why this suddenly happened. I think it may have been after my usual updates but I am not sure if that has anything to do with it at all.

Loading Bar? Maybe the URL/address bar where you type sites you want to go to (like www.google.com)? See Navigation Bar below. You may also need to see the first item "Can't see the Menu Bar".
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
You can un-install the Mozilla ActiveX control as Firefox no longer uses it and hasn't since, as I recall, version 2. See: [[ActiveX]]
To remove Tools > Add-ons > Extensions, click on the item, click Uninstall, click Restart Firefox in the Extensions window.
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

I just bought a Mac today and have never had one, my Itunes shows to have all of my music on it but it won't allow me to play it out loud, it says my computer is not authorized? what does this mean?

I'm a first time Mac user and I went to play my music on Itunes out loud and all the music I previously purchased will not play and then a pop up appears saying my computer is not authorized? what does this mean and how can I fix it?

You need to authorize the new computer that youre working with. First hover over the store button at the top of the screen and then select the authorize this computer button then a popup will appear where you have to put in your Apple ID and Password. Hopefully this works for you

Images have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

What is this button?

Similar Messages

Maybe you are looking for