What is this code mean, ( 14 slow blinking lights and 5 fast blinking lights) mean

need to know what this means please, 14 slow blinking lights and 5 fast blinking lights) mean

thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom.

Similar Messages

I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?

http://support.apple.com/kb/TS1583

What does " this code must be redeemed in the Australian storefront " mean? And how can I fix it?

What does " this code must be redeemed in the Australian storefront " mean? And can I fix it?

All iTunes gifts and gift cards are country-specific, they can only be redeemed and used in their country of issue. Are you in Australia with an Australian billing address on your account ? If you are then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Australia.
If you are not in Australia then you won't be able to use it.

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

Blinking caps and num lock lights

Opened up the lid on sleeping laptop and had nothing but a blank screen and blinking caps and num lock lights. I finally got vista restarted after turning it off and on a couple of times. Everything seems to be working, however the caps and num lock lights are still blinking every 2 seconds. Any thoughts on what is causing this?
JRG
HP Pavilion Dv4

Hello,
The blinking caps and numlock are a diagnostic feature of the Dv7 Notebook ( and others ). Depending on the combination it can be a number of different symptoms. They can be as minor as the battery having an insuficient charge or as serious as a CPU failure. I would recommend updating the ROM BIOS on your unit to ensure you have the latest fixes.- Make sure you have the latest one for your model - Here is a link to a document on the Blink Codes.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
regards,
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

Please explain what does this code does exactly

Can any one explain me what does the below code does.
This is the code written in one of the BADI (ME_PO_PRICING_CUST) .This badi will be triggered when a sales order delivery address is changed and while saving it this will be triggered. Over all what i come to know is they re trigerring a new version in this code. Can anyone explain me what exactly they are doing in this.Thanks...
METHOD IF_EX_ME_PO_PRICING_CUST~PROCESS_KOMK.
FIELD-SYMBOLS: <EKKO> TYPE ANY,
                 <PROCSTAT> TYPE MEPROCSTATE,
                 <FRGKE> TYPE FRGKE,
                 <YNAST> TYPE TABLE,
                 <WA_YNAST> TYPE NAST.
IM_EKKO-PROCSTAT = 02.
*break-point.
ASSIGN ('(SAPLMEPO)EKKO') TO <EKKO>.
ASSIGN ('(SAPLMEPO)YNAST[]') TO <YNAST>.
IF <EKKO> IS ASSIGNED.
    ASSIGN COMPONENT 'PROCSTAT' OF STRUCTURE <EKKO> TO <PROCSTAT>.
    ASSIGN COMPONENT 'FRGKE' OF STRUCTURE <EKKO> TO <FRGKE>.
    IF <FRGKE> = 'R'.
      <PROCSTAT> = '02'.
    ENDIF.
ENDIF.
IF <YNAST> IS ASSIGNED.
    IF <FRGKE> = 'R'.
      LOOP AT <YNAST> ASSIGNING <WA_YNAST>.
        <WA_YNAST>-AKTIV = 'X'.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDMETHOD.

r_htkl must be a range table. check the declaration part of it.
p_htkl is a parameter on selection screen i hope.
so, there are four fields on a range table.(range table are similar to your select options)
1. SIGN ( I or E - Inclusive or Exculsive)
2. OPTION(options like EQ = euqal, BT = Between, CP = contains pattern etc)
3. LOW (value)
4. HIGH (value)
so..
IF NOT p_htkl IS INITIAL. " checks if some thing is being passed to the parameter
r_htkl-sign='I'. " give the sign a value I i.e it make inclusive sign
r_htkl-option='EQ'. " EQ to option means you value will be checked for a equal to condition
r_htkl-low=p_htkl. " the low field in now assigned the same value of the parameter p_hktl
APPEND r_htkl. " the range table is appended.
endif.
so this range table can be used in select statements as :
select * from abcd into gt where xyz in r_hktl. ==> this will check for a EQ condition with value in r_hktl-low in database or
in if statements like : if abc in r_hktl. ==> this will check the EQ condition of abc with the r_hktl-low.
Had it been
r_htkl-sign='E'.
then the condition is same but with a NOT.. that means NOT EQ or NOT BT etc.
as exclusive of the option.
etc.
hope this is clear.
AND PLEASE CLOSE THE OTHER THREAD (duplicate)

Serial port control -- what's this code snippet?

Hi, all.
I've just become active working with LabView, version 6.0i. And this because of a program which "suddenly" stopped working, with no changes made by anyone that I can see (yeah, likely story, right?).
In short, the screenshot which I'll include with this post is of one tiny code snippet buried deeply in the .vi which runs an X-Z positioning system. I'd like to know what people thing this code snippet does. I have my suspicions, but I can't believe that whoever wrote this code actually used it for this purpose!
The X- and Z-positioners which I'm using are controlled by separate power sources, and separate ports on the computer. The X-positioner is ultra-fine-resolution, and has an optical encoder. It's controlled by the RS-232 port on the computer, and it's meant to be moved only a little at a time. The Z-positioner is a bit more coarse, and usually moves quite a bit at a time. It's serial-port controlled.
The screenshot is of the portion of the code called "XMove" -- that portion of the code which controls the x-positioning stepper motor. Often, the Z-positioner is still running during this part of the code (the "ZMove" subroutine is called before the "XMove"), and then, after both parts of the positioner have stopped, the code should shut down the power to them, and update the position of the translation stage.
However, once the code gets to this portion (screenshot), that while loop just keeps running.
Here's what I think is happening (please correct me if I'm wrong!): The Z-positioner is run by the serial port, which, as far as I know, can be controlled by only one device at a time. Thus, this While loop does the following:
1) attempts to write the characters "1R" followed by a linefeed to port 0 (the applicable serial port on this computer);
2) reads how many characters are stored in the serial buffer;
3) reads all the characters in the serial buffer;
4) takes the first two characters from the string read;
5) compares these two characters to *R;
6) if the two characters are R, then the loop terminates and the code finishes.
As far as I can tell (I've probed many parts of this structure), the code fails when the "N" portion passes the number of characters in the serial buffer to the "R" portion -- it's always zero. It appears to me that the "W" portion writes to the buffer AFTER the number of characters is read (I wouldn't have suspected this unless I'd run it many times and monitored which steps were done in which order). This ain't right!
I found a similar question answered in the KnowledgeBase forum, but the answer to that one was that the serial port may have an "echo" mode. That doesn't change the fact that data is being from to the port before it's written, does it?
Is there a way to make sure that the "read" statement happens AFTER the "write" statement? Am I way off base with what this code snippet should do? And, most importantly, *** is this a good way to tell if the Z-positioner is done with its job? ***. Is this a standard trick to tell if a program is done with the serial port?
Thanks, all. I know the quandary of trying to debug with so few details, and not having the program in front of you. Any help is appreciated!
Sincerely,
Curtis Osterhoudt
Attachments:
VI_diagram.jpg ‏17 KB

I suspect someone did change it, but they just don't realize they did.
THe code snippet is an example of some very bad LV code! What you suspect is happeneing is indeed true. LV uses a data dependacy paradigm that says code execution order is dependent on data availablility. Data availability is determined by ythe rule that the output of a node or sub-VI is not available until the object completes.
In you snipet, the only node that has to complete before the read bytes at port and the write to port VI is the the constant port number constant. That means that LV can execute either the write or the check bytes at port VI's first. This is determined at LV compile time. If for some reason LV decideds to compile in the write before the check bytes at port, the
n the I/O may work as intended, BUT NOT POROGRAMMED!
For a quick fix, put the contant port number and the write VI in a single frame sequence structure. This way the read from the constant and wire operation must comlplete before the seq completes, therby forcing the read stuff to wait.
I hope this help,
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

What is this code?

public class CustomAnalyser extends Analyzer
     @Override
     public TokenStream tokenStream(String fieldName,final Reader reader)
          return new TokenStream()
               private boolean done;
               private final char[] buffer = new char[1024];
               @Override
               public Token next() throws IOException
                    if(!done)
                         done = true;
                         StringBuffer buffer = new StringBuffer();
                         int length = 0;
                         while(true)
                              length = reader.read(this.buffer);
                              if(length == -1) break;
                              buffer.append(this.buffer,0,length);
                         String text = buffer.toString();
                         return new Token(text,0,text.length());
                    return null;
well here what is written in {} after return new TokenStream()???is this like a method inside a method?

You must be using Antlr.
TokenStream is an interface, which doesn't have an implementation. The code you posted returns a TokenStream and defines all the required implementation right in place.
%

What does this code do

hi friends, i came across this code, and i am struck at understanding this code,
usually loop keyword will be followed by itab, but here there is nothing, same with sort.
    SORT.
LOOP.
    AT NEW MSEG-WERKS.
some code
    ENDAT.
    AT NEW MSEG-MATNR.
some code
      NEW-PAGE.
    ENDAT.
    AT DETAIL.
      WRITE:
      / MSEG-LGORT,
        MSEG-BWART,
        MSEG-MBLNR,
        MSEG-ZEILE.
    ENDAT.
    AT END OF MSEG-MATNR.
      SKIP 1.
      WRITE: 'x y z..'
    ENDAT.
    AT END OF MSEG-WERKS.
      SKIP 1.
     WRITE: 'x y z..'
    ENDAT.
ENDLOOP.
an some one please explain me this code, little briefly.
thank you.

sorry friends, i forgot to tell that the following piece of code was above this code:
INSERT
MSEG-WERKS                             "Plant
MSEG-MATNR                             "Material
MSEG-MBLNR                             "Material document
MSEG-ZEILE                             "Material item
INTO HEADER.
INSERT
LIPS-VBELN                             "Delivery
LIPS-POSNR                             "Delivery item
MSEG-LGORT                             "Storage location
MSEG-BWART                             "Movement type
MSEG-MENGE                             "Quantity
MSEG-SHKZG                             "Debit/credit
MSEG-MEINS                                                  "UoM
INTO DETAIL.

HT4061 Hello: My 4S phone went off and I tried to restore it but get a 4014 error code. What is this code and how can I get it to restore?

Hello: My 4s phone turned off and when I tried to restore I got a 4014 error. What is this error and how do I restore the phone?

Hello Linda,
Thank you for the details of the error you are getting when trying to restore your iPhone. I recommend the steps below for error 4014:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error4000
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT4059 what does the red light and 'not in store' mean

What does the red light in manage my books mean? And what does 'not in store mean'?

Hello Simon,
I believe you have two unrelated problems. The red light is only associated with the digital audio port and indicates the "mute" switch inside the jack that turns off the built-in speakers when phones are in use has jammed in the mute position. No way it should affect your ability to start the computer. That has to be something else.
Does your computer give the normal startup chime sounds when you turn it on?
If you are getting the normal startup chime and have a wired keyboard, boot while pressing the SHIFT key. Keep holding the SHIFT key until you get a desktop, then let go the key. At this point, do not try to do any work with the computer but rather see if it will restart normally (without holding any keys or key combos).

What is this hidden "feature" in mobile Safari for and how can I use it?

OK, one day, like any geek would, I was in the car messing with my iPod touch. I was playing in Safari, typing in email addresses and such to get the exciting "WARNING - PHISHING SITE" screen. So I then tried typing "/" into the address bar, and when I hit "go", something interesting happened. The "/" changed to "file:///", and it tried to load it, but then popped up with an error message that said "This page could not be opened because it is a local file". Now I'm not new to the "file:///" thing, and I've used it to access folders using Chrome that Explorer wasn't showing for some reason. So, what if that tag used for? Obviously Apple has a use for it somehow since they included a little shortcut to get to it. I'll post some screenshots below so you can see what everything looks like:
So if this happens to have any use at all, I'd like to know about it!
I also asked this question over here: http://lockergnome.net/questions/157444/what-is-this-hidden-feature-in-mobile-sa fari-for-and-how-can-i-use-it

That is a shortcut for opening a file locally stored on the iPod. This is not really useful since iOS does not permit such access to its file sustem.

When ever I reboot my device, I get an error message that says, "runtime error info.plist not found". What is this, how does it effect my ipod and how do I correct this error?

I have an ipod touch 64gb. Lately, I discovered an error message on the lockscreen that says "Runtime Error Info.plist not found". What is this, will it effect my ipod, how does it effect my ipod and how do I correct the error? (I see the error message when I power up my ipod and when I reboot).

Follow this article:
How to restart the Apple Mobile Device Service (AMDS) on Windows

What's this crap on my plot legend? And; how to get rid of it?

Forgive the lack of a technical term; but what's the crap (shading/vertical lines) added to the mini-plot previews on the Plot Legend on this XY Graph in LV2012 SP1?
And how do i get rid of it to make it look more like the original (e.g., just a solid color background)?
I would normally specifcally identify these parts by name; yet it appears these parts have no name:
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Figured it out: it's from setting the Plot Area:Colors:BG Color property to Transparent. Changing this to a solid color likewise changes the preview to a solid color.
Bonus points: who can describe those design elements that appear when plot area is transparent? This is not a trick question; i don't know the answer, and am curious.
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

The sys light blinks red and the GPS light is solid red even though the antenna is at a window. Wan light is blue.

My extender work fine for the last 8 months but now the system light just blinks red and the GPS is solid red even though the antenna is next to a window?

See the Network Extenders User Guide:
http://www.verizonwireless.com/support/pdf/network_extender_user_manual.pdf
There is a page dedicated to the light codes this device will display along with instructions on how to handle each situation.

What is this code mean, ( 14 slow blinking lights and 5 fast blinking lights) mean

Similar Messages

Maybe you are looking for