What is this error message in single user mode?

When in single user mode, I was given this message at the prompt
:/ I have no name! #
If you want to make modifications to files
/sbin/fsck-fy
/sbin/mount-uw
:/ I have no name! #
HOW DO I FIX THIS?

Firefox's Error Console (Ctrl+Shift+J) collects lots of those style rule warnings. Some style rules only work in particular browsers (such as "filter" which is for IE), so Firefox notes that it doesn't recognize them. This information is more for the web developer's benefit than yours, since you can't do much to change the site.
To see serious errors and filter out the style warnings, click the Errors button at the top. Hopefully a lot less clutter.
Anyway, are you asking because something isn't working correctly?

Similar Messages

  • HT1386 I am trying to sinc my iPhone with my iTunes to get my music on my phone and i keep getting an error message 42001 pop up when i attempt to sync what is this error message and what do i do to fix this problem??

    I am attempting to sync my phone with iTunes and I keep getting an error message 42001 so my phone can not sync with iTunes... What is this error message and what can I do to fix this problem and sync my phone to iTunes?

    Dear Apple team,
    I recently bought an iphone3GS from USA and jail broke it. Since I heard the there are lots of disadvantages I thought to unlock it officially through the original owner (in copy). He assisted me and confirmed that he unlocked it with AT& T (See the attachment). According to the instructions I restored the phone. But it is not activating with “Activation server is currently not available, please try again or try with iTunes”
    When I try with iTunes , it says “you haven’t inserted a SIM” even though I insert the original AT&T SIM.
    My current location is Sri Lanka ,so don’t have any apple support.
    Please help me to be a good fan of apple.

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

  • What does this error message mean? disc recording not found

    What does this error message mean? disc recording not found

    Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • TS2753 Unknown error 23.   What is this error message all about ?

    Unknown error 23.   What is this error message all about ?
    My phone not starting up. When I updated Itunes - it came up with that error message.
    Cheers
    Vinay

    core audio error mssg -39?
    core audio is telling you it needs a break and is "goin' down the pub for a guinness".
    the tricky one is: ca error -39bs. where it asks you to shout the guinness.

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • TS1846 What does this error message mean?

    What does this error message mean? I am trying to burn a project to DVD...
    Formatting was not successful.  Layer 0 exceeds the maximum layer size allowed.  Please choose a suitable marker location that will support this condition.

    The project is 1:22:30  - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

  • TS1702 0xE8000004-what does this error message mean?

    0xE8000004-what does this error message mean?  I get it when trying to sync my Garmin USA app.

    See http://support.apple.com/kb/TS3221.

  • What does this error message mean?  MFMessageErrorDomain error 1028.

    What does this error message mean? 
    MFMessageErrorDomain error 1028.
    I can't seem to delete a message from my mailbox.  The above error message comes up every time and the message then reappears in my inbox.

    Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
    From the Mail menu bar, select
    Mail > Preferences > Accounts > Advanced
    From the menu labeled
    Keep copies of messages for offline viewing
    choose
    Don't keep copies of any messages
    Close the window and save the change. Relaunch Mail and test.

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • What's   "...start in Single User  mode"? HOW? and WHY?

    A silly question...
    What's "...start in Single User mode"? HOW? and WHY?
    Can anyone, please explain that to me?
    Cheers!

    Hello Nando,
    The only silly questions are the ones that never get asked
    Have a look in here...
    Single User Mode
    Hope that helps
    Regards
    Ian

  • What is this error message?

    Hi all, I have been having probs with my iBook for a couple of weeks now where it just sits on the grey screen with the spinning gear. I cannont start in safe mode, hardware test reveals no errors, disk utility says that HD and permissions are fine, clearing the PRAM didnt help, I cannot do an archive and install as there is not enough room left on my HD. I can start in single user mode but cannot remove files as super user (su) or by using "chmod" to change the file permssions, "sudo" doesnt work either for "rm <file>" or "rmdir <folder>". Also, i cant login to my user account (login) because it says that user doesnt exist. I have also run "fsck -yf" and "mount -uw" and this doesnt help either.
    I just tried to boot into verbose mode and it stopped. here are the previous lines so that you may be able to tell me what is going on:
    Creating RAM Disk for syslogd
    hdik: IOKit timed out waiting for driver to load: error e0002d6.
    hdik: attach fail: error e0002f0
    syslogd: cannot create /var/run/syslog: Read-only file system
    syslogd: child pid 113 exited with return code 1
    Creating RAM Disk for Crashreporter
    hdik:IOKit timed out waiting for driver to load: error e0002d6.
    Launching Crash Reporter
    com.apple.SecurityServer: database /vardb/CodeEquivanceDatabase opened READONLY (R/W failed errno=30)
    com.apple.SecurityServer: error writing entropy file /var/db/SystemEntropyCache
    com.apple.SecurtiyServer: Entering service
    Can anyone tell me what this means? I would like to avoid doing a format and install if possible and the bad thing is i dont know anyone else that owns a mac so that i can direct link them.
    Any advice or suggestions would be greatly appreciated.
    rossco
    iBook G4   Mac OS X (10.3.9)  
    iBook G4   Mac OS X (10.3.9)  
    iBook G4   Mac OS X (10.3.9)  

    Hello! "READONLY (R/W failed errno=30)" would indicate that the write failed because user doesn't have write access to the disk. Have you booted from the install cd and tried repairing from there? If you ever get to the HD see if you can change the ownership so you'll have write privileges. Tom

  • What's this error message mean?

    Keep getting a crash on starting up After effects 7. It gives me this error message. Anyone tell me what this might mean in terms of my next step to resolve it?
    Date/Time: 2006-04-19 16:59:08.561 -0700
    OS Version: 10.4.6 (Build 8I127)
    Report Version: 4
    Command: After Effects
    Path: /Applications/Adobe After Effects 7.0/Adobe After Effects 7.0.app/Contents/MacOS/After Effects
    Parent: WindowServer [86]
    Version: 7.0 (7.0)
    PID: 352
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
    Thread 0 Crashed:
    0 com.apple.CoreFoundation 0x907c56a8 CFStringGetLength + 52
    1 AdobeCoolType 0x026a74c8 OSUtils::GetNameFromFamilyID(short, __CFString const*&, unsigned char*, __bool8&) + 96
    2 AdobeCoolType 0x026a6fc4 CarbonFontHandler::GetMacFamilyUniName(short, unsigned char*) + 60
    3 AdobeCoolType 0x026a7ae0 CarbonFontHandler::FindNextFont(ATMCFontID*, ATMCUIInfo*, char*, CTCacheFile*) + 240
    4 AdobeCoolType 0x026aca80 FontHandler::GetNextFont(ATMCFontID*, ATMCUIInfo*, char*, CTCacheFile*) + 88

    I can think of 2 things to check:
    1. does the same thing happen with a different user account?
    2. Perhaps the prefernces has been thrashed in some way.
    Home directory

  • What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

    I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule.  Thats when I learned that Time Capsule stopped backing up back in January.  So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message.  What does it mean and how can I fix the problem?

    The backup is corrupted in some way.. you need to verify it.
    The error is common enough but there seems to be a range of solutions.
    Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
    Look particularly for the posts by Pondini.
    And check his troubleshooting for methods of doing things like verify.
    http://pondini.org/TM/Troubleshooting.html
    A5

  • What does this error message even MEAN??

    So as I've been posting on here recently, I'm in the process of upgrading the OS on my old G4 from Panther to Tiger. I've received 2 different suggestions on how to safely do so (the 1st was simply to install Tiger on the 2nd partition of my internal drive, and then designate that one as my boot drive).
    But for the 2nd method, it was suggested that I clone my current boot partition (using something like Carbon Copy Cloner, which I'm attempting), save the clone to my external drive (so I can boot off that if something happens), and then Upgrade my Panther to Tiger on the same partition, so that I can keep all my Preferences, Bookmarks, etc.
    In preparation, I Verified and Repaired Permissions on both the Source Disk and the Target volume--the External Drive, which is actually formatted in Mac OS Standard; the drive I'm cloning is formatted in Mac OS Extended (Journaled)--and had run the "Clone" command, but immediately got this error message:
    "There was an error during correcting volume privileges: chown:/Volumes/Untitled/: operation not supported. Would you like to ignore this error or stop?"
    So I stopped.
    What does that even MEAN? Should I "ignore" it? Or simply skip Cloning the damned drive, install the new OS to the 2nd partition, and designate that one as my boot drive?? I've been worried about Permissions on this computer, as for some reason I can't seem to Verify, or Repair Permissions for the 2nd partition of the internal drive, but for all I know, maybe you're not even supposed to be able to.
    If anyone could help answer either issue though, I'd really appreciate it. I've just been preparing my computer for this upgrade for a day or two, and would really like to go through with it...

    You need to first format the external drive Mac OS Extended (Journaled.) Open Disk Utility, select the external volume from the left side list, click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (Journaled) from the drop down menu, then click on the Erase button.
    Now you should be able to clone your system volume. However, do this first:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Maybe you are looking for