What is this icon? How do I fix this?
I recently backed-up my OSX install, did a clean format, and copied my files back, piece by piece. When reinstalling aperture, I coped the library back into the correct location. In this process, my username also changed.
Now, all my photos have this icon in the bottom right corner:
\\www
\\dicianno
\\org
\\/files/apple/aperture-alert-icon.png
I'm guessing this is relating to paths or permissions, but I'm at a loss. All images seem to load fine. I have not yet been using Aperture full-time, so I might be missing some basic reference point that would help me notice the underlying problem and fix it.
Any help would be appreciated. Fixing this in an automated fashion would be very appreciated.
UPDATE: the discussion board ate the link, trying to fix, please excuse the annoyingness of the link format
http://www.dicianno.org/files/apple/aperture-alert-icon.png
is this in a book ???
the yellow triangle means:
Because of low image resolution, the image’s print quality may be affected.
This badge appears on images placed in book pages and webpages.
you are using referenced masters, and currently they are offline ... you will need to reconnect them ... it can be accomplished automatically once you get one ... this was caused by the changes you made when you changed user name ...
for more search here on reconnecting referenced masters ...
http://discussions.apple.com/search.jspa?threadID=&q=reconnectingreferencedmasters&objID=c184&dateRange=last90days&userID=&numResults=15&rankBy=10001
or read here:
http://www.bagelturf.com/aparticles/ref/index.html
Similar Messages
-
A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?
If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool. -
My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!
Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day! -
Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix this?
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do. How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!
Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport -
when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?
Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
I just purchased a Mac and downloaded my previously purchased songs from iTunes, however it only downloaded a portion of the song (about 1:15) and this appears to be the same on all of the songs. What is happening and how can I fix it?
Hello Pork Chop 2,
Congratulations on your new Mac! It sounds like your purchased songs are not playing completely after you downloaded them. I recommend to following steps for an issue like this:
Symptoms
Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
Resolution
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
You can find the full article here:
Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I installed the new 5.0 version of Firefox and the thing keeps telling me i have to resart my system to finish the install of an old version. I resart and it doesnt do anything. What is wrong and how do I fix this. I have been using firfox for more than a year now and have never had trouble till this issue came up
If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
http://kb.mozillazine.org/Uninstalling_toolbars -
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
So I just bought a new iPhone 4S and I have to share my data with four other people so to avoid using it up I use wifi whenever possible. I use iMessage to talk to iPhones but when I'm not around wifi or when I don't have any more data, I don't receive any of their regular SMS messages but I can send them. I checked my friend's iPhone and he receives my message as an SMS but when he replied it was still in iMessage. Is it not detecting that my iMessage is off ?What's wrong and
how can I fix it ?I think I fixed the apps, though.
*Turn off your wifi and only turn it on when you want to use it
*Lower your brightness
*Turn off "Push" on notifications and mail and turn on "Manual"
*Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
*Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then. -
I upgraded IPAD to os6. Now Safari has lost all my bookmarks and won't let me add any new bookmarks or new folders. What is wrong? How do I fix this? IPAD was not synced to laptop.
I also upgraded iPad 2 to os6. However, I have not lost my bookmarks but I cannot add or delete any new bookmarks or new folders.
Livebythemoon recommended to reboot iPad. How to reboot my iPad? -
What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
I have the latest software so I don't know what to do?
David V.When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
may macbook late aluminum stuck on apple icon with loading icon how can i fix it? i tries doing the command p+r thing
please help me asap. btw when i did the command p+r or command +option+p+r a lock icon with textbox at the bottom is there and i dont know what to type in.
-
Code 5200 shows up on my pixmamx320. What is it and how can I fix it.
Code 5200 shows up on my pixmamx320. What is it and how can I fix it?
Hello pep303.
To try and resolve this issue, please unplug the power from the unit for about 25-30 minutes. Once this time frame has passed, plug the unit in directly to a wall outlet to see if the printer will power on.
If the error still remains, please contact a technical support representative at 1-800-652-2666 between the hours of 10 a.m. and 10 p.m., EST, Monday - Friday for additional assistance with this error.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
Estou desenvolvendo um layout de Nota Fiscal, porém estou com alguns problemas: 1. Não consigo encontrar a Variáveis do CNPJ do PN e da Inscrição de Sub Tributaria: Tentei colocar a Variável 60 para o CNPJ, porém não é aceito. Localizei esta variável
-
How to create forms in mobile app????
As part of my application i need to create a page which contains the user informations like name,address and phone numbers. Also the user should be able to update the same page? How to create the same? Is the option of creating as a form is available
-
Oracle PL/SQL Web service - dynamic parameters... possible?
Oracle 11.2.0.3 - newbie on web services! Currently we have a pl/sql web service taking in 2 static parameters and returning a varchar2 response. I was asked today if it's possible for a web service to take in a dynamic set of parameters and return a
-
Opening a file in a particular encoding
Hi, Is there any way that given a file we can choose to open it using a particular encoding (without having to read all the contents and write it to another stream/file) ?? I know that we can use the file.encoding property but that's more global at t
-
any help would be much appreciated!