What is this:     if ((screendata[i]&1)!=0)

could someone explain what this means, specifically the &1 portion
if ((screendata&1)!=0)
screen data is an array of shorts
Edited by: jamesss on Feb 4, 2009 12:58 PM

jamesss wrote:
so just to confirm I understand this
(screendata&1)
is going to return 0 or 1 matching what the rightmost bit of screendata[i] is?
Yup.

Similar Messages

  • I'm getting this error statement: XULRUNNER error: platform version 6.0.2 is not compatible with min etc max etc6.0.1 - what is this about and how can it be corrected?

    This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
    XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
    What is this about and how can I retsore access to Firefox on my pc?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

    I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

    Hi there
    I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these.  Instead it just took me to the
    adobe page with nowhere visible to update.  I then  sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
    functionality  It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe. 
    I have since remedied the problem as  my original lightroom 5.7 icon is still available on the desktop and have gone back to that.  I do feel that this is a bit
    of a rip off and an unnecessary waste of my time though.
    Thank you for your prompt reply by the way.
    Carlo
    Message Received: May 04 2015, 04:52 PM
    From: "dj_paige" <[email protected]>
    To: "Carlo Bragagnolo" <[email protected]>
    Cc:
    Subject:  I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have
    reduced functionality what it this about and how do I get my product back
    dj_paige  created the discussion
    "I have just sought  to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
    this about and how do I get my product back"
    To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
    >

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

    What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
    I found the manual update, which worked!
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

    Hi Barbara,
    For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
    http://forums.adobe.com/message/5396792#5396792
    http://forums.adobe.com/message/5409050#5409050

  • HT201412 iPhone 4S extremely hot and turned off. What causes this? is it safe to plug in charger?

    My iPhone 4S is extremely hot. It just turned off and wont turn back on. It had 65% battery and now its sahing to plug in to.charge. Im afraid to plig into outlet since its hot. What does this mean?

    Hi Mende,
    Thanks for the info. I am though not sure of the service centers here in Delhi (India) as they are really not concerned about the customer and try to make money by telling that things cannot be changed in warranty due to x and y reasons (my friend had similar issues and he was forced to buy a new charger even when things were in warranty). Though thanks for the info.

  • Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

    Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
    Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

    Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
    The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
    As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

  • When trying to update my IPad apps I am getting the message "Your Apple ID has been disabled". Still have more than 50$ in my account, so what does this mean ?  What can I do to get my ID enabled again ?

    when I am trying to download IPad updates I get the message "Your Apple ID has been disabled". What does this mean? How do I get my ID enabled again? Still got more than 50$ in my account !

    Reset your Apple ID password here >  Apple - My Apple ID
    More information here >  Apple ID: "This Apple ID has been disabled for security reasons"  appears

  • When trying to update phone, a message says i have purchased items that have not been transferred to iTunes, what is this?

    When trying to update phone, a message says i have purchased items that have not been transferred to iTunes, what is this?

    We need a bit more information to help.
    Are you trying to update your iPhone using iTunes on your computer?  If so, did you make purchases through the iTunes Store or App Store on your iPhone, and fail to sync them with your computer?  That is the likely meaning of what you are seeing.  If this is true, the purchases would be added to iTunes in your computer before the upgrade proceeds.

  • My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

    Time Capsule Airport
    Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
    Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

    This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
    In the airport utility bring up your Time Capsule.
    Simply post the screenshots here.
    So here is mine.
    Click on the Edit button and give us the Internet and Wireless and Network tab..
    eg.
    Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
    This is wifi in your computer.
    The following are important..
    DO not use long names with spaces and non-alphanumeric names.
    Use short names, no spaces and pure alphanumeric.
    eg TC name. TCgen5
    Wireless name TCwifi
    Use WPA2 Personal security with 10-20 character pure alphanumeric password.
    read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
    OS X Mavericks: Time Machine problems
    Mount the TC manually in finder.
    AFP://TCgen5.local
    When asked for the password .. that is the disk access password and save it in the keychain.
    Reset Time Machine
    See A4 here. http://pondini.org/TM/Troubleshooting.html

  • I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
    Thank you.

  • I'm trying to upgrade to Mountain Lion and I get an error message that says "server error during download; 403 forbidden. What does this mean, what can I do? I had no problem downloading Lion.

    Trying to upgrad to Mountail Lion and got an error message : 403 Forbidden. What does this mean? What can I do? I had no problem when I upgraded to Lion.

    403 Forbidden HTTP status code in response to a request from a client for a web page or resource to indicate that the server refuses to allow the requested action. In other words, the server can be reached, but the server declined to allow the requested access.
    http://en.wikipedia.org/wiki/HTTP_403
    Could you be using a different Apple ID oe such?

  • I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the  "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

    I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the  “Adobe Photoshop JPEG file” format.
      What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

    JoeLib wrote:
    You type way faster than me Gene.
    Well, not necessarily in this case.
    According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
    Gene's post:       Dec 29, 2014 5:54 PM
    Joe's post:          Dec 29, 2014 8:57 PM

  • What does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    what does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    http://support.apple.com/kb/HT1311

  • What does this message mean?  "ITunes has fetected an iPad in recovery mode.  You must restore this iPad before it can be used with ITunes".

    What does this message mean?  "itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with ITnes."  How do I restore when every time I connect to my computer I get this message?

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

Maybe you are looking for

  • Web Services API Sample w/ Filters

    Does anyone know how to use a Filter in a doOracleSearch call using the Java proxies supplied for the Web Services API? I tried doing this but it appears there is a conflict with Servlet Filter class. When I used the complete path to the class, it co

  • Retriving Absence data from PNP logical database

    hi all, there is an function where i can get the absence data but my client wants in the following order But my client wants the report in following format: YEAR--- week number-- number of absence hourse in that week 2006 - WEEK - HOURS infotype is p

  • Uninstall Failure

    I am trying to uninstall CS3 from my Win 7 laptop and the uninstall has failed. Now I cannot uninstall, re-install, or repair the current installation. The program(s) were properly deactivated prior to doing the uninstall. The deactivated CS remains

  • HT1689 Message is cannot be downloaded at this time

    My apps indicate that I have 8 updates. Why won't they update? I am hitting update all but nothing is happening.

  • EnterpriseSession.logoff() error while doing Outproc Session Management

    In application I am keeping Sessionstate as outproc and mode= SQLSERVER.  Here everything works fine except at the place where I do enterprisesession.Logoff(); enterprisesession.Dispose(); It throws the error: [HttpException (0x80004005): Unable to s