What is this long 'error' that came up?

As soon as i turned on my macbook pro, it said that it needed to be restarted 'a message in the middle of the screen on great background and written in many languages'. When it came back on, i got this error below, can anyone tell me what it is... although i already think its stupid Himachi, as its not the first time i see the same message;
Interval Since Last Panic Report: 267972 sec
Panics Since Last Report:          1
Anonymous UUID:                    F2DDCBCE-BC08-4124-B575-95EB169DB82A
Tue Jun 26 18:44:29 2012
panic(cpu 0 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f80b1634b, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000004300000007, CR3: 0x0000000021dc201a, CR4: 0x00000000000606e0
RAX: 0x0000004300000006, RBX: 0x0000000000000002, RCX: 0xffffff7f80b19922, RDX: 0xffffff800b545d40
RSP: 0xffffff807ec039a0, RBP: 0xffffff807ec039f0, RSI: 0x000000008020690c, RDI: 0xffffff800ccf3408
R8: 0x0000000000000000, R9: 0x0000000004e7818e, R10: 0xfffffe80056beae8, R11: 0x000000000005127c
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff800b379bd8, R15: 0xffffff800af6fb38
RFL: 0x0000000000010286, RIP: 0xffffff7f80b1634b, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000004300000007, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807ec03650 : 0xffffff8000220792
0xffffff807ec036d0 : 0xffffff80002c473a
0xffffff807ec03880 : 0xffffff80002da0cd
0xffffff807ec038a0 : 0xffffff7f80b1634b
0xffffff807ec039f0 : 0xffffff7f80b199b1
0xffffff807ec03a30 : 0xffffff7f80b17a0e
0xffffff807ec03a70 : 0xffffff8000347137
0xffffff807ec03ac0 : 0xffffff800039f33d
0xffffff807ec03b30 : 0xffffff80003a0b43
0xffffff807ec03cd0 : 0xffffff8000341dcc
0xffffff807ec03da0 : 0xffffff8000341f82
0xffffff807ec03dd0 : 0xffffff800056687f
0xffffff807ec03e10 : 0xffffff8000566920
0xffffff807ec03e40 : 0xffffff8000533d73
0xffffff807ec03e70 : 0xffffff8000563a64
0xffffff807ec03f60 : 0xffffff80005ccfe8
0xffffff807ec03fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
         com.logmein.hamachi(1.0)[4F10A12D-34FD-ACB0-81FB-036809497AFC]@0xffffff7f80b150 00->0xffffff7f80b1cfff
BSD process name corresponding to current thread: hamachid
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 60498871790
last loaded kext at 52762051460: com.logmein.hamachi     1.0 (addr 0xffffff7f80b15000, size 32768)
loaded kexts:
com.logmein.hamachi     1.0
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.filesystems.ntfs     3.10.1
com.apple.filesystems.autofs     3.0
com.apple.driver.AudioAUUC     1.59
com.apple.driver.AppleTyMCEDriver     1.0.2d2
com.apple.driver.AGPM     100.12.42
com.apple.driver.AppleMikeyHIDDriver     122
com.apple.driver.AppleHDAHardwareConfigDriver     2.2.0f3
com.apple.driver.AppleHDA     2.2.0f3
com.apple.driver.AppleUpstreamUserClient     3.5.9
com.apple.driver.AppleMCCSControl     1.0.26
com.apple.driver.AppleMikeyDriver     2.2.0f3
com.apple.kext.ATIFramebuffer     7.1.8
com.apple.driver.AppleIntelHD3000Graphics     7.1.8
com.apple.driver.SMCMotionSensor     3.0.2d6
com.apple.driver.AppleSMCPDRC     5.0.0d0
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.iokit.IOBluetoothSerialManager     4.0.5f11
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleSMCLMU     2.0.1d2
com.apple.driver.AudioIPCDriver     1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin     5.0.0d0
com.apple.driver.AppleMuxControl     3.0.16
com.apple.driver.AppleLPC     1.5.8
com.apple.ATIRadeonX3000     7.1.8
com.apple.driver.AppleBacklight     170.1.9
com.apple.driver.BroadcomUSBBluetoothHCIController     4.0.5f11
com.apple.driver.AppleUSBTCButtons     225.2
com.apple.driver.AppleUSBTCKeyEventDriver     225.2
com.apple.driver.AppleUSBTCKeyboard     225.2
com.apple.driver.AppleIRController     312
com.apple.driver.CoreStorageFsck     182.11.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
com.apple.BootCache     33
com.apple.iokit.SCSITaskUserClient     3.2.0
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCISerialATAPI     2.0.3
com.apple.iokit.IOAHCIBlockStorage     2.0.3
com.apple.driver.AppleUSBHub     4.5.0
com.apple.driver.AppleFWOHCI     4.8.9
com.apple.driver.AirPort.Brcm4331     530.4.20
com.apple.driver.AppleSDXC     1.2.0
com.apple.iokit.AppleBCM5701Ethernet     3.2.4b8
com.apple.driver.AppleEFINVRAM     1.5.0
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleAHCIPort     2.3.0
com.apple.driver.AppleUSBEHCI     4.5.8
com.apple.driver.AppleUSBUHCI     4.4.5
com.apple.driver.AppleACPIButtons     1.5
com.apple.driver.AppleRTC     1.5
com.apple.driver.AppleHPET     1.6
com.apple.driver.AppleSMBIOS     1.8
com.apple.driver.AppleACPIEC     1.5
com.apple.driver.AppleAPIC     1.5
com.apple.driver.AppleIntelCPUPowerManagementClient     193.0.0
com.apple.nke.applicationfirewall     3.2.30
com.apple.security.quarantine     1.3
com.apple.driver.AppleIntelCPUPowerManagement     193.0.0
com.apple.kext.triggers     1.0
com.apple.driver.DspFuncLib     2.2.0f3
com.apple.driver.AppleSMBusController     1.0.10d0
com.apple.iokit.IOSurface     80.0.2
com.apple.iokit.IOSerialFamily     10.0.5
com.apple.iokit.IOFireWireIP     2.2.4
com.apple.iokit.IOAudioFamily     1.8.6fc17
com.apple.kext.OSvKernDSPLib     1.3
com.apple.driver.AppleHDAController     2.2.0f3
com.apple.iokit.IOHDAFamily     2.2.0f3
com.apple.driver.ApplePolicyControl     3.0.16
com.apple.driver.AppleSMC     3.1.3d8
com.apple.driver.IOPlatformPluginLegacy     5.0.0d0
com.apple.driver.AppleSMBusPCI     1.0.10d0
com.apple.driver.AppleGraphicsControl     3.0.16
com.apple.driver.IOPlatformPluginFamily     5.1.0d17
com.apple.driver.AppleBacklightExpert     1.0.3
com.apple.iokit.IONDRVSupport     2.3.2
com.apple.driver.AppleThunderboltEDMSink     1.1.8
com.apple.driver.AppleThunderboltEDMSource     1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter     1.8.2
com.apple.kext.ATI6000Controller     7.1.8
com.apple.kext.ATISupport     7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB     7.1.8
com.apple.iokit.IOGraphicsFamily     2.3.2
com.apple.driver.AppleFileSystemDriver     13
com.apple.driver.AppleUSBBluetoothHCIController     4.0.5f11
com.apple.iokit.IOBluetoothFamily     4.0.5f11
com.apple.driver.AppleThunderboltDPInAdapter     1.8.2
com.apple.driver.AppleThunderboltDPAdapterFamily     1.8.2
com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.4
com.apple.driver.AppleUSBMultitouch     227.1
com.apple.iokit.IOUSBHIDDriver     4.4.5
com.apple.driver.CoreStorage     182.11.0
com.apple.driver.AppleUSBMergeNub     4.5.3
com.apple.driver.AppleUSBComposite     4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.2.0
com.apple.iokit.IOBDStorageFamily     1.6
com.apple.iokit.IODVDStorageFamily     1.7
com.apple.iokit.IOCDStorageFamily     1.7
com.apple.iokit.IOSCSIArchitectureModelFamily     3.2.0
com.apple.driver.AppleThunderboltNHI     1.5.5
com.apple.iokit.IOThunderboltFamily     2.0.0
com.apple.iokit.IOUSBUserClient     4.5.8
com.apple.iokit.IOFireWireFamily     4.4.5
com.apple.iokit.IO80211Family     420.3
com.apple.iokit.IOEthernetAVBController     1.0.1b1
com.apple.iokit.IONetworkingFamily     2.1
com.apple.iokit.IOAHCIFamily     2.0.8
com.apple.iokit.IOUSBFamily     4.5.8
com.apple.driver.AppleEFIRuntime     1.5.0
com.apple.iokit.IOHIDFamily     1.7.1
com.apple.iokit.IOSMBusFamily     1.1
com.apple.security.sandbox     177.5
com.apple.kext.AppleMatch     1.0.0d1
com.apple.security.TMSafetyNet     7
com.apple.driver.DiskImages     331.6
com.apple.iokit.IOStorageFamily     1.7.1
com.apple.driver.AppleKeyStore     28.18
com.apple.driver.AppleACPIPlatform     1.5
com.apple.iokit.IOPCIFamily     2.6.8
com.apple.iokit.IOACPIFamily     1.4
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.69f3
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_third_party
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0253, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

francescod95 wrote:
although i already think its stupid Himachi,
You are correct. Remove it from your system.

Similar Messages

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

What is this Configuration Error: 1 = I must reinstall the AI every time again and again and loose so much time! How can I solve this error?

What is this Configuration Error: 1 = I must reinstall the AI every time again and again and loose so much time! How can I solve this error?
please answer on my email too
[email protected]

Nobody can tell you anything without proper system info or other technical details. The simply answer probably is that you are running your system with insufficient user privileges and system restore or some security tools are blocking stuff/ erasing your install.
Mylenium

What is this log error for Safari ? unlink of file /Users/.../Library/Caches/com.apple.Safari/fsCachedData/failed.

What is this log error for Safari ? Why am I getting this ?
2014-04-05 5:26:13.688 PM Safari[5407]: unlink of file /Users/georgestamatis/Library/Caches/com.apple.Safari/fsCachedData/8A9936E7-E9A E-400D-A5D7-DCF074F115FC failed. Errno=2

I have this report is this helps you find the error:
System Version: OS X 10.9.2 (13C64)
Kernel Version: Darwin 13.1.0
Boot Mode: Normal
Model: MacBookPro9,2
Battery cycles: 519
Kernel messages
   Apr 3 12:25:33   MacAuthEvent en1 Auth result for: 00:24:6c:46:bb:90 Auth timed out
   --- last message repeated 3 times ---
   Apr 3 13:47:09   [BNBMouseDevice][handleStart] staticPrepControlChannelAction returned error e00002c0
   Apr 3 13:47:10   [BNBMouseDevice][prepInterruptChannelWL][04-0c-ce-2b-d7-d2] _interruptChannel->waitForChannelState returned error 0xe00002c0
   Apr 3 13:47:10   [BNBMouseDevice][interruptChannelOpeningWL] prepInterruptChannelWL returned error e00002c0
   Apr 3 16:14:45   process com.apple.WebKit[1437] thread 806808 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
   Apr 3 16:17:43   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 3 16:17:43   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 4 08:23:48   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (dc2,620)->(dc3,c28).
   Apr 5 10:53:48   MacAuthEvent en1 Auth result for: 60:33:4b:e0:25:42 Auth timed out
   Apr 5 11:58:28   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (28c1,62c)->(28c2,c30).
   Apr 5 13:22:16   Sound assertion in AppleHDAFunctionGroup at line 1042
   Apr 5 14:12:31   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2066,5e8)->(2067,c18).
   Apr 5 14:12:32   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2068,60c)->(2069,80c).
   Apr 5 15:48:39   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 5 15:48:39   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 5 17:28:56   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
   Apr 5 17:57:20   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b0
   Apr 5 17:58:03   wl0: Roamed or switched channel, reason #8, bssid d8:c7:c8:e8:55:b0
   Apr 5 18:01:52   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
Loaded extrinsic kernel extensions
   com.globaldelight.driver.BoomDevice (1.1)
Extrinsic daemons
   com.anchorfree.ajaxserver
   com.adobe.fpsaud
Extrinsic agents
   2BUA8C4S2C.com.agilebits.onepassword-osx-helper
   com.google.keystone.user.agent
launchd items
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
             (com.adobe.fpsaud)
   /Library/LaunchDaemons/com.anchorfree.ajaxserver.plist
             (com.anchorfree.ajaxserver)
   Library/LaunchAgents/com.google.keystone.agent.plist
             (com.google.keystone.user.agent)
Extrinsic loadable bundles
   /System/Library/Extensions/BoomDevice.kext
             (com.globaldelight.driver.BoomDevice)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
Netmask: 255.255.0.0
Application check
   com.google.GoogleDrive
User login items
   Boom
   iTunesHelper
   Dropbox
   TextExpander
Safari extensions
   1Password (beta)
Desktop file count: 40
Elapsed time (s): 469

What are all the errors that can be corrected by using tran code rsrv?

hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hari

Hi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded

Hello .. I lost my passcode on the iPhone .. and worked his recovery .. in case of recovery shows me error 3004 .. What does this mean error? Please help

Hello .. I lost my passcode on the iPhone 5s 16 gb .. and worked his recovery .. in case of recovery shows me error 3004 .. What does this mean error? Please help

See Resolve iOS update and restore errors - Apple Support for possible resolutions.

TS3694 I waited about an hour to download IOS 7 and at the very end, it said An unknown error occured (6). What is this "unknown" error?

So basically I waited about an hour for itunes to update my iPhone to IOS 7 and it is currently frozen because it had an (error 6) right at the end up the update. What do I do now? Why is it not updating?

An unknown error occured (6). What is this "unknown" error?
Don't know - it's unknown.
Try again, when the Apple servers are less busy.

I thought as a consumer, Apple works for us. Had I known what I'd lose by upgrading, I would have thought twice!!! I want Front Row BACK!!! also what is this new playlist that was auto added when I upgraded? It's called iTunes Artwork screen?

I thought as a consumer, Apple works for us. Had I known what I'd lose by upgrading, I would have thought twice!!! I want Front Row BACK!!! also what is this new playlist that was auto added when I upgraded? It's called iTunes Artwork screen?

Think the iTunes artwork playlist is for a new screensave they put in where if you click the album artwork it plays the song.

What are the common errors that occur while extraction is carried out?

Hi all,
What are all the errors that occurs while extraction for fico, sd and mm?
Can anyone list me the errors along with the solution.
regds
hari

Hi hari shankar
It depends
Like the data level errors ,Short DUmps
USER EXIT ERRORS
some time source system code errors.
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Winners dont do different things,they do things differently**
> Hi all,
>
> What are all the errors that occurs while extraction
> for fico, sd and mm?
>
> Can anyone list me the errors along with the
> solution.
>
> regds
> hari

What is this extra cable that comes with MBP?

I just got my MBP today and it came with two AC cables. One is the magsafe whcih is what i;m already using, but it also came with another cord. this one is a lot thicker and it is 3-prong. what is this for? i can't find a slot on the magsafe of the MBP that apparently fits it. thanks

hey, i think that it is the extension for the magsafe adapter, if you grab the part of the magsafe where it plugs into the wall you should be able to slide it off with a little force, you can then slide the extension on and it will be much longer. hope that helps!

What does this console error mean?

I just got my 13" non-retina MacBook Pro back from the Apple Genius bar since the cable that connected my hard drive was failing. Before I brought it in, it suddenly went from an OK speed to a something is wrong speed. But before I took it in on Monday, I opened up the console and it had these errors that had to do with like the SMC and such. Before they took it in, we re-formatted my hard drive and re-installed OSX. That didn't fix it and the last backup I had on my Time Capsule was April 3 of this year. When I got it back, I transferred my data from the Time Capsule so I didn't have to re-install all my programs and such and I had a VERY important video stored on the Capsule. And today, I noticed while in my science class, the top bar on the top of the screen wtih the Apple symbol was missing. I shut it down and performed a disk utility, SMC reset, and PRAM reset and those errors are still there. Also when I went into iPhoto to retrieve the video I had, photos would appear in the boxes for a split second and then disappear and when I try to vew them, I got a triangle with an "!" within it. I can open them in Aperture but no videos can be accessed. But back to the errors. I get these two errors as a pattern in the console:
4/9/14 12:46:44.000 PM kernel[0]: SMC::smcReadKeyAction ERROR TC0D kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022443000
4/9/14 12:46:49.000 PM kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022443000
What do they mean and how do I fix them? So far, there aren't any major performance issues, it just runs a little slower than before. I bought my MacBook brand new in September of last year (2013) with all standard configurations but I did upgrade the RAM from 4GB to 8GB since I'm a mobile DJ. I haven't contacted Apple yet but I will when I get home later today since I'm still in school. And also when I try and open the files stored on my time capsule, it says I don't have permission to. Like... It's the same computer. It was restored from a Time Machine Backup. How do I allow the correct permissions? This is my computer, no one else uses it unless my brother wants to connect friends/family in minecraft.

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
sudo mdutil -t 416080
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

What does this mean: ERROR! Shared library ioser12 could not be found.

Hi all,
I am trying to establisch a JDBC connection to a MaxDB database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error messages that the user is still connected. I think these are followups from the first one - one testcase may be broken by this error, but the connection is not closed.
I searched the web to find what i could do against it. I found some forum discussions about this problem and hence i tried to set my path and classpath to locations where the isoser12.dll is located (runtime environment/bin), and finally copied it to the windows/system32 dir.
Nothing made this error disappear. I am still stuck with this one since two days.
Btw, the same testcases work well with other databases like oracle or db2.
Hence, i am calling to you for some ideas about this error.
Thank you in advance for help,
Andreas Schroeder

Hi Andreas,
I am also interested in making maxdb(sapdb) work with S1 application server. I would appreciate if you could let me know if you are able to make it work with S1 V8 server.
Thanks,
Gorton Zhao
Hi all,
I am trying to establisch a JDBC connection to a MaxDB
database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i
am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my
own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error
messages that the user is still connected. I think
these are followups from the first one - one testcase
may be broken by this error, but the connection is not
closed.
I searched the web to find what i could do against it.
I found some forum discussions about this problem and
hence i tried to set my path and classpath to
locations where the isoser12.dll is located (runtime
environment/bin), and finally copied it to the
windows/system32 dir.
Nothing made this error disappear. I am still stuck
with this one since two days.
Btw, the same testcases work well with other databases
like oracle or db2.
Hence, i am calling to you for some ideas about this
error.
Thank you in advance for help,
Andreas Schroeder

What is this: " MuseJSAssert: Error calling selector function:TypeError: $(...).museMenu is not a fu

Everything works fine in preview. Get this error when uploaded to site and trying to switch between some pages:
: " MuseJSAssert: Error calling selector function:TypeError: $(...).museMenu is not a function"
site is www.authorizedagents.com

Chrome still reports the http://www.campusone.net/scripts/1_1/jquery.musemenu.js is missing (though note it is now looking in a "1_1" folder rather than a "1.1" folder).
To do exactly what I'm doing to detect this:
1) Go to a page that reports a JavaScript error or that otherwise shows a missing link for an image using Chrome.
2) Right click and choose "Inspect Element". It doesn't matter what you click on.
This should bring up the developer tools UI within your browser window.
3) From the button at the top of the Developer Tools UI click on "Console".
This should display a list of any errors that occurred during the load of the page. In this case it shows the jquery.musemenu.js file was not found.

What is this "MAYBE".-error.??

People....
I have created and deployed successfilluy my EJB on to my Oracle Jserver 8.1.5 on linux through Jdeveloper 2.0 on NT.
When i try to access one of the methods through my client program it gives the following error....
org.omg.CORBA.INTERNAL[completed=MAYBE]
org.omg.CORBA.INTERNAL[completed=MAYBE]
org.omg.CORBA.INTERNAL[completed=MAYBE]
at com.visigenic.vbroker.orb.GiopConnectionFactoryImpl.destroy(Compiled Code)
at com.visigenic.vbroker.orb.GiopConnectionImpl.close(Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(Compiled Code)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(Compiled Code)
at org.omg.CORBA.portable.ObjectImpl._invoke(Compiled Code)
I have included all required classes and my connection via IIOP is perfect. What is this "MAYBE"..??
When I debug my client code it succeeds in ic.lookup. but further down the code when I invoke a method of the EJB oject it throws the above error!
Could anyone help me on this?
Thankx
vahees.
null

Are u by any chance passing an object to EJB method or getting from EJB method which is not serializable. It may cause the said exception.
HTH
Ravi

What is this long 'error' that came up?

Similar Messages

Maybe you are looking for