What is this mean "Unsupprted image format" ??
Hello i've been cropping and editting and now suddenly when i click on a photo to enlarge full screen i get " unsuported image format"" thats so terrible because now i cant export them end email files..
anybody can tell me what this is
thanks thanks thanks
<Edited by Moderator>
Look - this has been reported in these discussions so many times and by so many people and for so long - that everyone and their granny knows this is an Aperture PROBLEM (?bug?)
With me it occurs every time when I edit large .tiff or RAW files (around 60 MB) and can only get 20 done - before 'Unsupported File Format' and the dreaded red screen! Closing and then re-opening Aperture is the only solution (and I have tried ALL thos suggested on these many threads re this problem!
I have emailed Apple so many times (and I guess so have others) - so far, to my knowledge they have not even recognised that this exists. Even in this thread you can see 'it may be a bug' ??? what does this mean EXACTLY (William Lloyd) ???
Come on Apple - as well as the fab hardware we need RELIABLE photo editing software - and. for me Aperture is great - until it requires to be shut down and re-started every 30 minutes!
Otherwise, I for one will switch to another software
Similar Messages
-
I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my picturesJoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM -
downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?
Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).
-
Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
HereQ - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here -
In place of the percentage number next to my battery icon, it now says "single percent format." What does this mean and what do i do about it?
You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys together. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Once you are safely connected go to the iPod Summary tab and make sure "manually manage music and videos" is checked:
iTunes for Mac - Keyboard Shortcuts
Managing content manually on iPod and iPhone -
Starting with files in
Powerpoint Mac 11.3.2 version converting to Google Docs Presentation, I'm told I need Quicktime and a compressor to view images. What does this mean?Were you using third-party software when the panic occurred? Is the panic repetitive or it just happened once? IN the latter case it could simply be a software glitch. But if it's repetitive then there's some other problem either hardware or software. Use the Console application in the Utilities folder and review the console log around the time of the panic to see if there are additional clues to the cause of the panic.
The error indicates that the problem was a failure to respond to an interrupt by the CPU. Now this could simply be caused by a software glitch, but it could be a hardware problem related to the CPU. In the latter case the panic would probably become repetitive, in which case you would want to take the computer in for service to be sure the CPU isn't failing. -
I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid". What does this mean and how do I correct it ?
There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15 -
I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
KrisIt means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x -
The last date of my back up was 10/4- keeps saying The backup disk image "/backup disk image "/Volumes/time Capsule/ cheryl lynott's MacBook.sparsebundle" is already in use?
HELP -- what does this mean -- .......
Often, this error can be corrected by pulling the power on the Time Capsule, waiting a few minutes, and powering the Time Capsule back up.
See # C12 for more tips
http://pondini.org/TM/Troubleshooting.html -
What is the most suitable image format for processing with imaq?
Hello.
What is the most
suitable image format for processing with imaq?
I want to capture an image of a usb webcam, store and
then process it with imaq. I need to know what format to save the
captured image can then load and process it with imaq vision.
ThanksThe only criteria is: don't use JPEG for anything scientific! The compression involved with saving JPEGs means you always lose information. I tend to prefer PNG - it's compressed, but non-lossy, and also widely supported. TIFF is fine as well, but I don't think has any advantages over PNG for this application. JPEG2000 can give good non-lossy compression I think is slower to read/write than PNG.
-
Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?No, my file name is mainContent.oam
My project name is mainContent.an
This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
On a MacPro, 10.7.
Are you an Adobe person or just a nice helper? -
Backup Failed. Comment is "Make sure your computer and backup disc are on the sme network and the backup disc is turned on". What does this mean?
Just back from the dentist.
Did a hard reset and when i asked time capsule to do a backup it tells
me
"Time Machine could not complete the backup. The backup disk image is already in use"
I think I misunderstand how this back up device works.
Is it to be plugged into the back of the router with an ethernet cable?
I have the Time capsule sitting beside my Imac.
The cable modem and router are in another room
I am new at this stuff. Thank you for patience and help -
if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.
Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
free space on internal boot hard disk? How much ?
Video codec
streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
in what format ? .jpg, .bmp, .tif, else ?
Audio
from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
iMovie/iDVD preference file
The "com.apple.iMovie.plist" file or "com.apple.iDVD.plist"
Many users has not observed that there are TWO libraries.
_ Library - at root level
_ Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
Camera
External hard disk
USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
Mac OS - most probably X.7 or more
iMovie version - more than iM'11 v. 9.0.4
Action taken
Finalizing project - I never do as I never understood the gain to do so
Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set - I only use PAL (25fps)
Yours Bengt W -
Panic! What does this mean???? help
Hi,
My macbookpro is just 3 weeks old and I already had 3 panics.....
Here is the log file for one of the event:
Mon May 28 18:34:45 2007
panic(cpu 1 caller 0x0035DF18): mbuf address out of range 0x1183000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x14203b68 : 0x128d08 (0x3cb134 0x14203b8c 0x131de5 0x0)
0x14203ba8 : 0x35df18 (0x3eb8f4 0x1183000 0x144eb78 0x206)
0x14203be8 : 0x23ab46 (0x25b70100 0x0 0x1e2 0x1)
0x14203cf8 : 0x23ed3a (0x2b8e394 0x25b70100 0x1 0x1e2)
0x14203d38 : 0x361033 (0x2b8e16c 0x0 0x25b70100 0x0)
0x14203dd8 : 0x35342d (0x2b8e16c 0x0 0x14203e9c 0x25b70100)
0x14203e08 : 0x34f370 (0x3478dd0 0x14203e9c 0x2d89004 0x0)
0x14203ef8 : 0x34f604 (0x3663dac 0x3478dd0 0x33 0x13a11930)
0x14203f58 : 0x379e23 (0x3663dac 0x2ff3cb8 0x2ff3cfc 0x0)
0x14203fc8 : 0x19b17e (0x2eb2900 0x0 0x19e0b5 0x2eb2ac0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb019f558
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
What does this mean?
Is there a fix?
Thank you.
Fredfredericlang,
Your plan sounds good to me, and yes, there could be some "intermittent" hardware failure causing the panics.
Before we go on, I want to establish that you should NEVER have a panic, provided you have three things:
1) Flawless hardware
2) A flawless installation (which is why we are "zeroing" and reinstalling)
3) No bad or conflicting kernel extension
To back this up, I will tell you that I have only had one KP on this machine, it was long ago, and it was due to a disk error (and thus a bad installation). Currently, my "uptime" is at 44 days, 13 1/2 hours, and I put this thing through its paces every day.
OK, well a 4th thing: Problematic peripherals.
Let's rule these out, one by one. Are you connecting anything that could cause panics, or is anything connected when they occur? No? Let's move on.
We are pretty sure we have ruled out a bad installation, and you are going to make double sure. Good.
Are you installing any third-party "haxies," or anything else that might place kernel extensions in the Extensions folder? Are you running the Migration Assistant to transfer stuff from a PPC machine? If you can rule this last one out, we are left with only one possibility...
HARDWARE! As I say, you should never have a single kernel panic. If you have narrowed it down to hardware, and they still occur, be firm! Insist, regardless of the results of any diagnostics, that you have a new machine, or a logic board/memory replacement. If necessary, escalate your case. Get this fixed, and get it fixed expeditiously.
Scott
Maybe you are looking for
-
Read filter values of DTP by ABAP routine
I am trying to read the filter values of a DTP by ABAP routine in transformation. I could do it in the past by using the code DATA: t_filter_values TYPE rsbk_th_range. t_filter_values = p_r_request->get_th_range( ). After patching (SAPKW70019), t
-
Long queue for unidentified mails/ domains
friends i was checking my queue for ex 2013 and i found loads of emails blocking my queue. we dont use these domains neither anyone from us connects to them.. they look some face domains.. can you guys please provide some info. please check below scr
-
Changing Default SMTP port in SAP Portal/Web AS java 6.40
Hi all, We are configuring notification service in SAP Portal 6.0 with SPS 15. The SMTP server not using 25 port which is default for SMTP. when the server is trying to send notification it is pointing to IP address and 25 port. HOw can I change the
-
Help?
-
I've been unable to install old version of Adobe software, like Photoshop 6. Don't want to upgrade (no $$ and I don't need newer version). I have the disk and serial #, but when I try to add the program using the control panel (Windows XP Home for PC