What is this "Store business document" option in SAP/PO

Hi
please let me know what is this "Store business document" option in PO -> services for object -> Create -> Store business document?
Thanks
Raju

Hi Raju
Create Business Object is used to Attaching a PC Document to an Object and Storing, and you can append documents, which have a connection to an object, from your PC to the object and at the same time store it in an optical archive.
Prerequisites
This function is only then active if an optical archive is connected to the SAP System. The document type (format template, for example FIINVOICE) and document class (for example DOC or FAX) of the document that you want to store must be known.
Procedure
In the Toolbox of the object services, choose .
Choose Store business document.
Expand the node of the document class that corresponds to your document.
Choose the document type that corresponds with your document by double-clicking on it.
Enter the path and file name of your document in the following dialog box.
        Alternatively, you can use the value help to call a window with the directory structure of your PC,         in which you can call the directory and select the document by double-clicking. 
Choose .
Result
The PC document is stored in the optical archive. You and other users can call it by using the Attachment List of the object.
Further detail Please see sap help:
SAP Library - Generic Object Services (BC-SRV-GBT)
Regards
Javed

Similar Messages

  • Enable 'Store business document' option in MIGO

    Hi ,
    We have observed that for MIGO transaction,the 'Store Business Document' option is disabled.Could you please let know how this can be enabled? We have serarched the forums,no inputs.Also,there is no indicator from the configuration side as well.Any help pointers will be very much appreciated.

    Hi Vipin,
    The 'Store Business Document' will only be active when an ArchiveLink document is configured against the object in question. In your case the object is BUS2081.
    You can use the transaction code OWD5 to do the configuration.
    Hope it helps.
    Regards,
    Neil

  • Generic Object services : Store business Document in VA03

    Hello Everybody,
    I  want to store business document in VA03, using SAP archive link.
    To get service object toolbox I had been added SD_SWU_ACTIVE = X for my user.
    Now the Toolbox appears, but the Store Business Document function is not activated.
    Could you explain to me, how to activate this functionnality for this document type (BUS2032) ?
    Regards.

    Hi Kenneth,
    For the Store Business Document option appear at GOS buttom:
    1) Check that in the OAC3 entry with Bussines Object are 'X' at field 'S' (Status)
    2) The Bussines Object are generates on SWO1 transaction.
    Can you upload any document to the repository to slant OAAD transaction??
    Best Regards

  • Store Business document - online (scanner) - error

    Hi ,
    I am getting the following error when i double click the document type....( In tcode mb03 )
    MBO3->Store Business document option->
    Error calling application via OLE
    SCANIFACE.CLSSTOREDOC
    Thanks with regards
    Girish

    Could you let know how are you managing this currently? For automatic scanning and storing of docs,SAP Archive link is the recommended solution.SAP Archive link scans, stores and links incoming and outgoing documents related to business processes to associated SAP R/3 objects. For more information, refer
    http://help.sap.com/saphelp_nw04/helpdata/en/5e/566039b85f9443e10000000a114084/frameset.htm
    Regards,
    Pradeepkumar Haragoldavar

  • Services for Object - Store Business Documents (issue with XLSX files)

    Hi,
    We are using the Services for Object > Store Business Document to be able to drag and drop files into (for example) Sales Inquiry, Sales Order, Sales Quotations etc.
    Within OAC2 we have set up the global document types and these have been linked to the relevant Object Types and Content Repositories in OAC3.  We have also set up the Content Repository as Document Area 'ARCHLINK'.
    The ArhciveLink Basic Settings in OAG1 have the 'Always Copy Document Class from Document Type' set under Storage Settings.
    The issue we are having is with XLSX document types.  When we drag and drop the XLSX documen type using the Store Business Document the file is stored against the Sales Order but when you come to view the attachments MS Excel opens but an error message appears saying 'Excel cannot open the file '******' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'?
    We have reviewed SAP notes 1925897, 1739026 and 1145885 however non appear to give me a clear answer as to why this is happening?
    I have found that if we unselect the option 'Always Copy Document Class from Document Type' in OAG1 then we can open the XLSX files.
    As we have a significant amount of documents attached to various objects, what would be the implications of making this change agianst existing records and new records?
    Any advice on this issue would be greatly appreciated.
    Gary B

    Hi David,
    No joy I'm afraid!!
    I added entry 'xlslx' with the relevant MIME Type, Application and Description into table TOADD for the ArchiveLink settings and also this entry was already in tables SDOKMIME and SDOKFEXT for KPro.
    I then following the process via the Services for Object within VA12 (Change Inquiry) to then Create > Store Business document > Select the relevant Document Type > Drag and Drop the XLSX file into the empty box.
    I then saved the record and tried to view the attachement but I am still getting the same message  'Excel cannot open the file '******' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'?
    Our client is on componet SAP_BASIS release 701 Support Level 0014 and Support Package SAPKB70114 and I can see that note 1237688 is for SAPKB70112?
    Regards
    Gary

  • "Store Business document" disabled

    Hi experts,
    I am activated the GOS toolbar in transaction c201, c202 and c203 with Activating Generic Object Services Toolbar in SAP Objects
    But, why appear the option "Store Business document" disabled? I configured all in oac0, oac2 and oac3; any idea?
    Thanks in advance,
    Regards,

    Hello Frighetto Antonio,
    very pleased to have a reply from you. but i was looking for any standard SAP Object link to attach documents from DMS for IW31 OR IW32 Transaction ie.. create service order.
    i could not find any unfortunately, what is the alternative that you followed to do this,
    did you attached documents from the left hand icon   Service for Objects Tab, from where also we can attach documents for any transactions.
    Can you please tell me if any document is attached with the help of this Tab, is there any search option to find the files attached,
    is there a link between this attachments and the SAP DMS or archive link.
    thanks and regards
    Priya s

  • Store Business Document

    Dear All,
    one of my client has enabled store business document for uploading external docs along with financial transactions. The problem is when I upload the document, what appears in the Title is the name of the object under which I upload and not the file name. Also the name of the user uploading or basically the creator's name doesnt appear. How can I address this issue ? Your inputs will be highly appreciated.
    best regds
    Subha

    Hi,
    when you go to document overview in fb03,on your left you will see a button like . You click on that and select create. The fourth option is Store Business Document. Thats where we are uploading the doc. However the file name gets changed and the creator id doesnt appear. Attached image.
    best regds
    Subha

  • Store business document inactive in transaction CJ20N

    Hi,
    The option "Store Business Document" is inactive in the transaction CJ20N.
    I saw a couple of forums that said that I have to create an archive link for this but I don't know for example what "Object Type" I can use for this in the transaction "OAC3" or what steps I have to follow to enable this option.
    Thanks for the help!

    Hi,
    I think that I figure it out how can I activate the "store business document" using your comments and this forum:
    Activate GOS business application for object PREL
    Now, my question is, could I use any TOA0# table when I'm creating an object type in the transaction OAC3?
    I saw that in my system I have the tables TOA01, TOA02 and TOA03 created but these tables contains entries.. is ok if I use for example TOA01 for the "Object type" that I have to create?
    Thanks for the help!
    Carlos

  • Iw32 service order - store business document disabled

    Hello,
       in transacion IW32 I select the object service toolbar - create. I would to select store business document but it is not enable. How can I enable it? Which is the right ObjectType to set?
    Thanks.

    Hello Frighetto Antonio,
    very pleased to have a reply from you. but i was looking for any standard SAP Object link to attach documents from DMS for IW31 OR IW32 Transaction ie.. create service order.
    i could not find any unfortunately, what is the alternative that you followed to do this,
    did you attached documents from the left hand icon   Service for Objects Tab, from where also we can attach documents for any transactions.
    Can you please tell me if any document is attached with the help of this Tab, is there any search option to find the files attached,
    is there a link between this attachments and the SAP DMS or archive link.
    thanks and regards
    Priya s

  • RFC/FM to store Business document in Purchase Order from external system

    Hi All,
    I have been going through various threads for suitable solution, but could not find one which can meet our requirements. Appreciate, if you could share your expertise for the following requirement.
    Requirement: One of our external system is going to create/change Purchase Orders in SAP using  standard BAPI's (BAPI_PO_CREATE1,BAPI_PO_CHANGE etc.,). During this process, they would like to attach supporting documents (.pdf, .jpeg, .xls etc) as 'store business document' for the same PO. As per our current configuration, we can attach the documents as dialog user from ME22N/ME23N transaction and attached documents are stored in our IXOS/ Archive server.
    Is there any standard BAPI/FM (RFC) available to achieve above requirement?. And what are the parameters we need to pass in the FM to attach or delete documents.
    System Details: SAP ERP ECC6 & Netweaver 7.0
    Kind Regards
    Kumar
    Edited by: Kumar Guntha on Sep 4, 2009 7:15 AM
    Edited by: Kumar Guntha on Sep 4, 2009 7:17 AM

    Hi Friends
    Any sugestions?
    Regards
    Kumar

  • Using GOS to store business document on the content server

    Hello All,
    BACKGROUND
    We use content server to store business documents via ArchiveLink.  The process to store a business document is via Generic Object Services menu path "Create -> Store business document". 
    ISSUE
    When document is stored in such a way, the actual name of the document is not displayed in the "Attachment list" of the GOS menu nor is it stored on the content server.  What we see instead in the "Attachment list" is a description of the Archive object (TOASP-objecttext) for all documents that we store. 
    NEED HELP
    We need to have a document's name (i.e. name of the uploaded file) displayed in the "Attachment list" of GOS.  We also need to be able to retrieve this file name programmatically via a function call or a class method. 
    Any help is greatly appreciated.
    Gene.

    1. In GOS attachment list i can able to see the attachment name (without extension) may be you need to check your layout using change layout (its may hidden)
    2. For getting attachment name programatically try this way
      i_object-typeid = 'BUS2012'.
      i_object-catid  = 'BO'.               
      i_object-instid = yatthdr-docno.       " Document Number
      refresh : i_brel, i_link.
    * Get Attachment List
      append 'ATTA' to i_brel.
      if not i_brel is initial.
        select *
          from srgbtbrel
          appending corresponding fields of table i_link
          for all entries in i_brel
          where
            instid_a eq i_object-instid and
            typeid_a eq i_object-typeid and
            catid_a  eq i_object-catid and
            reltype  eq i_brel-reltype.
      endif.
      wa_filter-send_info = ' '.
      wa_filter-no_content = 'X'.
      loop at i_link into ls_link.
        clear : wa_doc_data.
        wa_fol_cont-doc_id = ls_link-instid_b.
        call function 'SO_DOCUMENT_READ_API1'
          exporting
            document_id                = wa_fol_cont-doc_id
            filter                     = wa_filter
          importing
            object_header              = wa_obj_hdr    
            document_data              = wa_doc_data
          exceptions
            document_id_not_exist      = 1
            operation_no_authorization = 2
            others                     = 3.
    You can find the File Name in the WA_OBJ_HDR
    a®

  • Problem about using GOS to store business document!

    Hi Everyone,
        I am using Generic Object services toolbar to archive document.
       When I attach thru Create Attachment button and display by clicking on the attachments list, it is showing Creator name and the
    real name of document .But If I attach thru Store Business document and display it thru attachment list, Creator name and the document name is blank. But client want to see the creator name also in the display.
      Any one has idea about this?We need to have a document's name (i.e. name of the uploaded file) displayed in the "Attachment list" of GOS,We also need to be able to retrieve this file name programmatically via a function call or a class method .
    Any Your help is much appreciated.
    Thanks,
    lexian

    Hello  Sachin:
             Thank you very much!
             Now I will tell you the procedure:
             For example,enter tocode ME53,via Generic Object Services(GOS) menu path "Create -> Store business document", Then upload a document from my pc.
            If what my offer is not correct ,Please tell me.
           Thanks a lot!
         lexian!
    Edited by: le xian on Dec 3, 2010 2:47 AM

  • IMP. ME21N Store Business Document maximum attachment size.

    Hi,
    Could you please let us know, while attaching documents in PO thorough the functionality ' Store Business Documents' what is the maximum permisible size of the file that can be attached.
    Also, is there any limit to the number of files that can be attached in a single PO.
    Early response would be appriciated.
    Regards,
    Sandipan

    hi
    this depends upon the file size specified in your Document management System (DMS) customization  setting.

  • Add folder in Store business document

    Hi Experts,
    We have the option to attach PDF, TIF, DOC and XLS files to an accounting document by clicking on services to object icon->Create->Store business documents. A window with a folder-"Accounting documents" comes up, under this folder is mentioned the file types (PDF, TIF, XLS, DOC)  which we can select and upload a document. Now we have a requirement to add another NEW FOLDER for Inter Company accounting document exclusively, under which PDF file types for ICO invoices, ICO payments etc need to be configured. How do we configure this new folder in store business documents?

    Hi Ramesh,
    Could you explain the architecture of your DMS and ERP landscape.
    How these servers are placed ?
    Regards,
    Deepak Kori

  • Enablement of Store Business Document  (Drag and Drop Documents)

    Hi All,
    When creating a an attachment on FD32 ->Click on Services for this Object->Create popup ->Store business document is not letting me store the document.
    Does anyone know how to enable this function please?
    Many Thanks   Roxane

    Is there an error being thrown when this happens?
    I have seen some cases where this issue is resolved by performing the following:
    - Start transaction SE16 and enter the table name as TOAEX.
    - Click on the menu option TABLE -> CREATE ENTRIES.
    - Create the following entry:
      EXIT_ID  = BORLENGTHOBID
      ACTIVE   = X
    - Save the entries.
    So I guess the first step would be to check this entry exists and if not, try creating it to see if it helps.

Maybe you are looking for