What is transaction no buffer for user SAPSYS in transaction ST03?

Looking into transaction ST03 I find an unusual high number of transaction <no buffer> for user SAPSYS concentrated on one dialog instance during a short time frame. Can some one explain what this means?
Thanks
Harrie

Hi Harrie,
Have a look at the following notes:
Note 104026 - Semaphore 16 blocked by SAPSYS/high resp.time
Note 63476 - Response times too high for CPIC/RFC in ST03
Regards,
Siddhesh

Similar Messages

RFC_NO_AUTHORITY error for user SAPSYS in client 000

Hi
I have a lot of abap dumps in ST22 RFC_NO_AUTHORITY error for user SAPSYS in client 000 for today which I'm not sure what they mean. I don't have a SAPSYS user in client 000.
The reason that I'm concerend is we had an incident with the SAP server last night where it became unresponsive about 2.30 am and had to be manually rebooted this morning. The R3 jobs all ran OK but the BW loads failed and had to be re-run this morning. There were no unusual jobs or programs running last night and the Server Event Log does not contain any further information as to the probable cause of the problem.
I'm not sure if this error is related to the BW jobs running and was wondering did anyone come accross it and what it means.
Thanks
Siobhan

Check notes 944615 and 93254.
Rich

Trace deactivated for user SAPSYS

hi,
I see the following message in the sap system for one application server only for ENQ Process
I see the message in SM21
Trace deactivated for user SAPSYS
I could not find any other details of the sam
Please let me know of what can be the reason for the same

Check Security Audit setting in SM19 to see if by any chance theres a trace enabled for SAPSYS that is failing to "activate".... Long shot but worth trying.
Regards
Juan

Failed to activate authorization check for user SAPSYS

Hi Experts
I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
i am getting a error Failed to activate authorization check for user SAPSYS.
Please help me to solve this issue.
Regards
Venkat

Hi, Mr. Joe Bo.
Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
Basis Patch - 15, Kernel 159
I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
Thanks & Regards
Venkatesan J

What is the available memory for user in iPad

In iPad 3rd generation wifi model, what is the available memory for users?
Capacity          Available Memory
16 GB                      ?
32 GB                      ?

iOS should take about the same amount of storage on both, the difference is partly due to how a 'gigabyte' is defined e.g. on packaging it's 1 billion bytes, but on the device itself it uses the binary definition (2 to the power 30), and some storage may also be 'lost' by formatting : http://support.apple.com/kb/TS2419

What is the Object Type for User Define table ?

Dear All Experts,
I create one of the User Define Table with no. of UDF's
I already register User Define Table with Unique ID.
As per my knowledge, Unique ID is our Object type for that User Define Table.
I want to add Transaction Notification Code for created Used Define Table.
This Transaction Notification prevents user to must enter name in that form.
IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
BEGIN
If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del )
begin
SET @error = 1
SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Please help me for this problem.
Thanks & Regards,
Nishit Makadia

Hi All,
Thanks for your replay.
Below code is working for User Define Table's Transaction Notification
IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
BEGIN
If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del)
begin
select @error = 10
select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Necessary to Remember 4 Things. That are mentioned below.
1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
4) Use error code as 10 Number
Thanks & Regards,
Nishit Makadia

EWA Configuration... DUMPS... user SAPSYS

Hi,
I have setup the EWA report to my sandbox. Report is generating fine. I did all the setup from my own user which has S_RFC, S_RFCACL, & S_TCODE Objects. I have SAP_ALL Authorization. Everything is working fine. sandbox is generating early watch reports fine. But the problem is I am getting DUMPS in my Sandbox everyhour in 33 mins... and its dumping sooo many times. I had 147 dumps yesterday. Here is the Dump Log (ST22)
User "SAPSYS" has no RFC authorization for function group "SCUST_SYS_INFO ".
What happened?
The user "SAPSYS" attempted to execute a function module from
the function group "SCUST_SYS_INFO ", but does not have the appropriate
RFC authorization.
Error in ABAP application program.
The current ABAP program "SAPLSCUST_SYS_INFO" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The user "SAPSYS" has no RFC authorization for the function group
"SCUST_SYS_INFO ". Please contact your system administrator to give you
the RFC authorization for the required function groups (e.g. "SCUST_SYS_INFO
The RFC authorization object is S_RFC.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
Now i dont understand that from where this user came up SAPSYS in client 000... and we dont use client 000. strickly not allowed. I didnt use this user when generating RFS's.... Everything I did using my own user.
Please help ASAP. it is very critical...
Thanks,
Points will be posted for sure!!!

Hi,
Those are the following RFC's I am using;
In Solman: SM_XXXCLNTXXX_READ- user: Blank
                 SM_XXXCLNTXXX_TMW - user: Blank
                 SM_XXXCLNTXXX_TRUSTED - user: RFC-it has all the other rfc permissions as well as the you've provided me.
In CRM:    SM_XXXCLNTXXX_BACK - user: SOLMANXXX
                SM_XXXCLNTXXX_TRUSTED- user: checked on Current user
Please currect me if I am wrong. I think In solution manager, the user for xxxREAD should be SOLMANSMP001 which is standard under my other system when I go to sm59..
and for XXX_TMW, I should have user: SOLTMWSMP001...
Please correct me If I am wrong.
Thanks, I really appreciate your help

Clarity needed in SE30 For User/Service option

Hi Experts,
   What is the use of "For User/Service" push button in SE30.
   I am able to create an entry for a particular user and transaction.
   But what will it do?
   How can I take the trace list?
   How does it differs from usual way of taking trace list?
Thanks and regards,
Venkat.

Hi Venkat,
with this option you can schedule a trace.
Check out section 4 in Olga's blog:
4. How to trace HTTP/RFC requests or processes of other users?
/people/olga.dolinskaja/blog/2009/12/11/abap-runtime-analysis-se30--how-to-analyze-abap-program-flow
The use case is to capture a request e.g. an incomming rfc or http request.
But it works fo batch and dialog reuqests as well. You can apply filters.
With this otion it is as well possible to schedule a trace for a background job for example
before you leave the office and analyze it the next day when you come to the office
again. Of course all settings and limits of SE30 / SAT (file size, trace time, ...).
The same scenario is used by ST12 with the tasks / http option:
/people/hermann.gahm/blog/2010/03/22/st12-150-tracing-user-requests-tasks-http
If you use SE30 make sure to schedule the trace on all servers where the request
you want to trace may run.
Kind regards,
Hermann

Discount limits for users

Hello,
I have a requirement which states that the status of a quotation in SAP CRM should change to 'X' when the discount on a line itemcrosses a certain limit. This limit would be specific to the user creating/editing the quotation. i.e. I need to configure discount limits for users and want the quotation status to be set based on whether the discount offered is within the limit of the current user. Please provide your inputs.
Regards,
Aditya Mishra

I would searck for appropriate badi that is triggered, when discount is set (check if badi CRM_PRICING_I_BADI is triggered at that moment).
Then you can use function CRM_STATUS_CHANGE_EXTERN to set appropriate status when conditions are met.
And of course you will have to put somewhere the info what discount limit is allowed for users. You can create Z table in which maintaine that data or use some user parameters...
Regards.

What is the system status for a transaction ?

Hi All,
I want to know what is the exact meaning (usage) of system status ?
We can create a user status in status profile and attach it to transaction type, then why do we use system status ?
Regards,
Ashish

Hi Ashish,
User status are defined by the customer to define their business scenarios. So based on the business they can create status like Document Open (E001), In Transit (E002) etc. As you are aware that Status triggers the business flow in the SAP System. So based on a particular status the subsequent action will be followed. But how will SAP System know when to trigger the Billing, delivery and all the subsequent documents based on Customer Status Messages? So, to overcome this problem there is the concept of System Status like open (I001) etc which will help the system to keep track of the necessary actions. You can associate a System Status to User Status and hence you can trigger the business flow based on the status.
Have a look at the following link for a detailed technical info. The Status table is TJ30 for User status.
http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm
Hope this helps.
Thanks,
Samantak

What is this log error for Safari ? unlink of file /Users/.../Library/Caches/com.apple.Safari/fsCachedData/failed.

What is this log error for Safari ? Why am I getting this ?
2014-04-05 5:26:13.688 PM Safari[5407]: unlink of file /Users/georgestamatis/Library/Caches/com.apple.Safari/fsCachedData/8A9936E7-E9A E-400D-A5D7-DCF074F115FC failed. Errno=2

I have this report is this helps you find the error:
System Version: OS X 10.9.2 (13C64)
Kernel Version: Darwin 13.1.0
Boot Mode: Normal
Model: MacBookPro9,2
Battery cycles: 519
Kernel messages
   Apr 3 12:25:33   MacAuthEvent en1 Auth result for: 00:24:6c:46:bb:90 Auth timed out
   --- last message repeated 3 times ---
   Apr 3 13:47:09   [BNBMouseDevice][handleStart] staticPrepControlChannelAction returned error e00002c0
   Apr 3 13:47:10   [BNBMouseDevice][prepInterruptChannelWL][04-0c-ce-2b-d7-d2] _interruptChannel->waitForChannelState returned error 0xe00002c0
   Apr 3 13:47:10   [BNBMouseDevice][interruptChannelOpeningWL] prepInterruptChannelWL returned error e00002c0
   Apr 3 16:14:45   process com.apple.WebKit[1437] thread 806808 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
   Apr 3 16:17:43   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 3 16:17:43   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 4 08:23:48   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (dc2,620)->(dc3,c28).
   Apr 5 10:53:48   MacAuthEvent en1 Auth result for: 60:33:4b:e0:25:42 Auth timed out
   Apr 5 11:58:28   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (28c1,62c)->(28c2,c30).
   Apr 5 13:22:16   Sound assertion in AppleHDAFunctionGroup at line 1042
   Apr 5 14:12:31   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2066,5e8)->(2067,c18).
   Apr 5 14:12:32   IOAudioStream[0xffffff803ca70000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2068,60c)->(2069,80c).
   Apr 5 15:48:39   [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Apr 5 15:48:39   [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Apr 5 17:28:56   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
   Apr 5 17:57:20   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b0
   Apr 5 17:58:03   wl0: Roamed or switched channel, reason #8, bssid d8:c7:c8:e8:55:b0
   Apr 5 18:01:52   wl0: Roamed or switched channel, reason #1, bssid d8:c7:c8:e8:55:b8
Loaded extrinsic kernel extensions
   com.globaldelight.driver.BoomDevice (1.1)
Extrinsic daemons
   com.anchorfree.ajaxserver
   com.adobe.fpsaud
Extrinsic agents
   2BUA8C4S2C.com.agilebits.onepassword-osx-helper
   com.google.keystone.user.agent
launchd items
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
             (com.adobe.fpsaud)
   /Library/LaunchDaemons/com.anchorfree.ajaxserver.plist
             (com.anchorfree.ajaxserver)
   Library/LaunchAgents/com.google.keystone.agent.plist
             (com.google.keystone.user.agent)
Extrinsic loadable bundles
   /System/Library/Extensions/BoomDevice.kext
             (com.globaldelight.driver.BoomDevice)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
Netmask: 255.255.0.0
Application check
   com.google.GoogleDrive
User login items
   Boom
   iTunesHelper
   Dropbox
   TextExpander
Safari extensions
   1Password (beta)
Desktop file count: 40
Elapsed time (s): 469

Table for user status field in CJ20n transaction project defination

HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.

Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1)     TYPE c                 VALUE 'X',
           gc_no(1)      TYPE c                 VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
       objnr LIKE jest-objnr,
       stat LIKE jest-stat,
     END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
       objnr LIKE jsto-objnr,
       stsma LIKE jsto-stsma,
      END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0,       "Combination of JEST & JSTO
          objnr LIKE jest-objnr,
          stsma LIKE jsto-stsma,
          stat LIKE jest-stat,
        END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0,       "Uer status for all wbs
         objnr LIKE jest-objnr,
         stsma LIKE jsto-stsma,
         stat LIKE tj30t-estat,
         txt04 LIKE tj30t-txt04,
       END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0,       "User Status text - TJ30T
        stsma LIKE tj30t-stsma,
        stat LIKE tj30t-estat,
        txt04 LIKE tj30t-txt04,
      END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
     objnr FROM prps
           INTO l_objnr
           WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
      objnr
      stat
           FROM jest INTO TABLE lit_jest
           WHERE objnr = l_objnr AND
                 inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
      objnr
      stsma FROM jsto
            INTO TABLE lit_jsto
            WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
    READ TABLE lit_jsto WITH KEY
                        objnr = l_objnr.
    IF sy-subrc = 0.
      lit_status-objnr = lit_jest-objnr.
      lit_status-stsma = lit_jsto-stsma.
      lit_status-stat = lit_jest-stat.
      APPEND lit_status.
    ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
         stsma
         estat
         txt04 FROM tj30t
               INTO TABLE lit_usrtxt
               FOR ALL ENTRIES IN lit_status
               WHERE stsma = lit_status-stsma AND
                     estat = lit_status-stat AND
                     spras = sy-langu.
Let me know if you have any question.
Regards,
RS

What do system user SAPSYS and DDIC?

Hello,
In SM51 I can see the users SAPSYS and DDIC. Both execute continuously different reports.
Thus, also not user is logged on the system, system activity is noticed, caused by SAPSYS and DDIC.
Using ST03 you can see, which reports both processes execute regularily. But I do not have a clue, what these reports are good for. What is the purpose of SAPSYS and DDIC?
Can anybody give a detailed description?
thx, holger

SAPSYS & DDIC are pre-defined R/3 system users. User DDIC is a user with special privileges in installation, software logistics, and the ABAP Dictionary. The user master record for the above id's is created in clients 000 and 001 when you first install your R/3 System.

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

What's the difference between OEM and standart licensing of VMware vSphere for users?

Good day,
Could you please explain me,
What's the difference between OEM and standart licensing of VMware vSphere for users?

The difference is usually the support you get. With OEM versions you'll often get support from the OEM and not from VMware directly.
André

What is transaction no buffer for user SAPSYS in transaction ST03?

Similar Messages

Maybe you are looking for