What is twin sign? what kick off (in implementation project)
what is twin sign? what kick off (in implementation project)
regards
ramana
Hi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji
Similar Messages
-
What is twin sing? what kick off in implementation project
what is twin sing? what kick off in implementation project
regards
ramanaHi,
Twin Sign means Both the CLIENT and the COMPANY(IMPLEMENTING) signing on the Project papers by defining various project related things.
Once it is signed the Project Will KICK OFF means literally starts,
With the required resources, software and hardware.
Regards,
Anji -
Clusterware 10g: what kicks off 3rd-party failover script?
I am trying to use Oracle Clusterware 10g (installed on two identical Dell Linux boxes,
OEL 5.2) to failover a 3rd-party application, specifically websphere MQ. I have a ksh
script that is supposed to start/stop/restart the application.
Clusterware will fail over the IP address fine to the other box if I yank the primary box's
cable, but the app itself doesn't fail over. If I knew what (in Clusterware) did the
"kicking off" of the ksh script I could troubleshoot it more. I used the instructions in:
http://www.oracle.com/technology/products/database/clusterware/pdf/TWP-Oracle-Clusterware-3rd-party.pdf
and I'm pretty sure I did it right.
Any ideas?Here is the action script:
#!/bin/ksh
LOG="/san1/var/mqm/config/Controlmq.log"
echo "script started at `date` from `hostname`" >> $LOG
############################### func_stopMQ ######################################
func_stopMQ () {
QUEUENAME=$1
while [[ `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` -gt 1 ]]
do
echo "DEBUG : `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control` " >> $LOG
echo "there are `ps -ef | grep $QUEUENAME | grep -v grep | grep -v Control| awk {'print $2'} | wc -l` processes running associated with $QUEUENAME on `hostname`" >> $LOG
endmqm $QUEUENAME
endmqlsr -m $QUEUENAME
## echo "sleeping for 10 seconds before checking again"
sleep 10
done
## echo "All set, there are no processes associated with $QUEUENAME "
echo "stopped $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_startMQ ######################################
func_startMQ () {
QUEUENAME=$1
case $QUEUENAME in
MECM|MEQM)
PORT=1414
MEQA|MEQB)
PORT=5077
esac
## echo "starting $QUEUENAME"
strmqm $QUEUENAME
sleep 5
## echo "STARTING listener for $QUEUENAME"
runmqlsr -t tcp -p $PORT -m $QUEUENAME &
sleep 5
runmqsc $QUEUENAME < /san1/var/mqm/config/startCH_$QUEUENAME.DEF
echo "started $QUEUENAME at `date` from `hostname`" >> $LOG
return 0
################################ func_checkMQ ######################################
func_checkMQ () {
QUEUENAME=$1
PROCESSCOUNT=`ps -ef | grep $QUEUENAME | grep -v grep| grep -v Control| awk {'print $2'} | wc -l`
if [ $PROCESSCOUNT > 1 ]
then
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 0
else
echo "there are $PROCESSCOUNT processes associated with $QUEUENAME" >> $LOG
echo ":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" >> $LOG
echo "Status of $QUEUENAME : " >> $LOG
runmqsc $QUEUENAME < /san1/var/mqm/config/ChannelStatus.DEFS
return 1
fi
ACTION=$1
# QUEUENAME=$2
case $ACTION in
start)
## func_startMQ MECM
## func_startMQ MEQA
func_startMQ MEQM
func_startMQ MEQB
stop)
## func_stopMQ MECM
## func_stopMQ MEQA
func_stopMQ MEQM
func_stopMQ MEQB
check)
## func_checkMQ MECM
## func_checkMQ MEQA
func_checkMQ MEQB
echo "Sorry, the proper usage for this command is ControlMQ.sh start|stop|check"
exit
esac -
Hi,
in the next project i have work on off site implementation project.
till now i am in onsite implementation.
can any body expalin what is the difference between on site and offsite implementation.
Regards
venkatHello,
The difference between both is you are physically not there in the client's place. If your company is using clients network (local area network will be connected to client's network using WAN) there is no need of VPN. If the connection is internet based, then you need to have a Login to VPN.
Almost all the dicsussions and workshops are help there in on-site, you may be a part of the discussion using telephone or video conferencing. The work will be devided and allocated.
The advantage of working at client's place is , if there is any issues you can speck to the concrned person directly and the issue can be solved then and there.
Prase -
What is meant by kick off meeting?
what is meant by kick off meeting?
hi,
its the first step for a project. all the top ppl involved from the client and the IT partner are present. the projct managers make presentations like the scope of the projct, timelines etc.
saurabh -
Trying to download Mavericks I get install_error_distribution_signed_by_Apple. then I get kicked off to Lion troubleshooting,I meet the requirements what the h***?
Try this thread, it worked for me: https://discussions.apple.com/message/22873594#22873594
-
I keep getting kicked off internet and have airport extreme, what can fix?
I keep getting kicked off airport extreme on my new Macbook Air-- what are possible reasons and solutions?
Interference...
PowerCycle the extreme for now and see if it does any difference. -
My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?
See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck! -
I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?
Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this. -
I always download stuff then is suddenly asked for my secureity questions. and i guessed what they were then it kicked me off
how can i re-access my acount and change my secureity questions
-
The product distribution file could not be verified. It may be damaged or was not signed. what should i do ?
surely the apple firewall does not intercept garageband communication? would temporarily turning firewall off to download/update be a safe option?
regards -
What does the sign mean next to the battery: a with lock with a circle, but the I phone is unlocked
Orientation lock. From http://www.apple.com/iphone/tips/
Lock the screen orientation.
Double-click the Home button to bring up the multitasking interface, then swipe from left to right. Now tap the portrait orientation lock once to turn it on and again to turn it off. -
I have an iphon 4 got the new ios 7 and I need to redo my icloud but I dont have the password for it and apple does not have the infromation form the old account what should I do to turn off find my iphone
To to http://iforgot.apple.com and sign in with your iCloud ID. A new password will be sent to the associated email address.
It this doesn't work, go to https://getsupport.apple.com ; click 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. -
What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?
If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
Cheers,
GB -
What's the difference between EQ off and flat?
What is the difference between EQ off and flat? Are all the frequency's at the same place as if it were flat?
OFF uses iTunes EQ settings, if any.
FLAT overrides iTunes EQ settings, if any
Close.
In Flat, if a song has a preset EQ set in iTunes, it
will use that preset, otherwise it does not use any
EQ.
In Off, the EQ is not used at all.
Page 28 of the very fine manual for 2n Gen nano:
Using the Equalizer
You can use equalizer presets to change the sound on iPod nano to suit a particular music genre or style. For example, to make rock music sound better, set the equalizer to Rock. To use the equalizer to change the sound on iPod nano:
Choose Settings > EQ and choose an equalizer preset.
If you assigned an equalizer preset to a song in iTunes and the iPod nano equalizer is set to Off, the song plays using the iTunes setting. See iTunes Help for more information.
Hmmmm...? There's nano's EQ and iTunes' EQ...
Maybe you are looking for
-
Is there a way to split a project?
I have made a project that contains my movie, my slideshow, and my blooper section all in one project. However, now that I want to make a DVD out of all this, I would like to separate each of the sections so that on the DVD menu I can just have a Mo
-
This question has come up before, but I don't feel it was resolved to my satisfaction. I would like to, when I click on a linked MP3, for it to open iTunes. I don't want to right-click, or ctrl-click, or any key modifiers. I don't want to download it
-
I have been using itunes 6 with Windows xp for months with no problems. Suddenly any track i try to play comes up 'original file cannot be found'. My entire library seems to be disconnected from the original files. The track files folder is still on
-
I have a problem(urgent)
hi, I design my data warehouse with Data warehouse Builder and Deploy it to oracle database. then I execute my mapping and my data import from source to target schema. then I try to get report from my data warehouse with oracle bibeans. I recieve fol
-
I just upgraded to CS5 Premium. It came with a separate install disk for Acrobat 9 Pro. I already have Acrobat 9 Pro installed from CS4 (9.3.3). Is there anything different about this new one that came with CS5? Do I need to reinstall it from this CS