What is unknown error 36 when restore to Iphone4s?

My Iphone is recovery mode. When I will restore and update, Itunes inform this error?
I will upgrade Iphone4s from iOS 5.1.1 to iOS 6.0.
How do I resolve this problem?
Thank you

What do you finally do? I have de same problem!!!

Similar Messages

  • TS3694 What is Unknown error 6 when updating iOS?

    There is no information about "Unknown error 6" when trying to update to iOS 6.0.1  Any help would be appreciated.

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Unknown Error 1418 when restoring ipod

    I hope someone can help me fix my Ipod problem. I have the first edition of the U2 Ipod and when I was in Ireland it malfunctioned. I took it to an Apple Store today and they restored it to factory setting using a mac. Well I brought it home, I did what the man at the store said to do and downloaded 7.0 and then when prompted tried to restore the Ipod using Windows. When I did the message "Could not restore ipod, unknown error (1418)" appeared. Does anyone know what this means and what my next step should be?
    I am so close to being able to have my Ipod fixed and put my music back into it but I cannot get past this stupid error message. Does anyone know whether he screwed up my Ipod by formatting it using a Mac or what I should do next? The man said my Ipod was corrupted by something, could this be the problem? This is so frustrating because I am so close to having my Ipod back to normal and now don't know what to do. Thanks,would appreciate any help anyone can offer!!
    A1059   Windows XP   First edition of U2 Ipod

    some folks have been having some success with the 1417 and 1418 using eboncairn's technique:
    eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

  • An unknown error (2003) when restore iPod Touch

    downloaded the latest version of iTunes and tried to restore my iPod touch to iTunes, but it complains that it will have an unknown error (2003). I tried to restore my iPod about 20 times, but the same error comes every time. Then I plug the iPod off my computer and I plugged it in again. But then iTunes was complaining to me that the iPod that I plugged in is on a restore mode. I did everything by correcting the bug and am looking for the whole night Apple.com to answer this problem. I did the thing with Notepad, but it did not help at all. I'm looking for all the troubleshooting and I checked my computer but it did not help at all. I downloaded iTunes again but it did not help. What can I do? When my iPod is in a restore mode, I can not put music on, and I can not even open my iPod. The display shows only the cable and iTunes symbol. Please, help me.

    Does nobody have the answer to this question? Was somply tryin to update my ipod touch and it got all the way to the end and saod it couldnt update, then went in to "recovery mode" and needed to restored. Restoring will not work either, (error 2003) And now I too have an ipod that will not do anything! I dont care if it wont update, I just want it back the way it was before I plugged it in and tried to update it. Someone must have the answer to this!

  • Unknown Error 1430 when restoring iPod Classic

    Hi,
    Yesterday my ipod Classic froze, so I did a hard reset. However, it gave me a message that I needed to restore it, so I connected it to my Mac and attempted to restore.
    Upon connecting it, iTunes detected it in recovery mode, but when trying to run the restore process, it stops after about 20% and gives me the following error message: “unknown error 1430 the iPod could not be restored”.
    I have tried all the recommended steps on the Apple troubleshooting guide, including disconnecting and reconnecting, restarting computer, using different usb ports, different user accounts, and a different usb cable, reinstalling itunes and enabling/disabling disk use.
    None of these steps have worked and I am out of ideas so I would appreciate any suggestions if other people have encountered this problem before.
    Thanks in advance for any help.

    some folks have been having some success with the 1417 and 1418 using eboncairn's technique:
    eboncairn: iTunes7 & 5th gen iPod updating - is this possible solution? (winXP)

  • HT4061 unknown error (2) when restoring an iphone 4 after upgrading to 11.1.1 release of itunes and 7 ios

    I have upgraded my phone to 7.0.2 and had a few issues.  I have tried to restore from a back and upon verifying the firmware rstore I get the error "unknown error occurred 2" can anybody help?

    Error 1 or -1 indicates a serious hardware failure.
    Take the device to Apple for evaluation and possible replacement.

  • HT201210 what is the error 0xE8000024 when restoring ipad with itunes in recovery mode

    Ipad locked up and I had to restore via recovery mode.  error 0xE8000024 popped up several times during the process as well as the autoplay dialog box.  Is this normal?

    There is some troubleshooting for 0cE8 error codes on this page, which you could you see if it helps fix it : http://support.apple.com/kb/TS3221

  • Ipod nano gets unknown error -48 when trying to restore

    Hi All
    My Ipod nano gets unknown error -48 when trying to restore and download the software update. Specifcally, when I connect my ipod, I get a message saying itunes cannot access the ipod and that I should restore it. I go the the ipod tab, hit the restore button and the download begins (approx 16mb). The download completes, and then I get this message :
    There was a problem downloading the ipod software for the ipod "ipod". An unknown error occurred (-48).
    Please help !!!!!

    Even though not specifically listed, try the steps here:
    http://support.apple.com/kb/TS1372
    If you know someone with an XP windows machine try the reset utility on their computer.

  • What does "unknown error has occurred mean when trying to login to the app store

    what does "unknown error has occurred" mean when trying to login to the app store

    Welcome to the Apple forums.
    Good idea to fill out your profile so people can see what machine you are writing about.    
    Also a good idea to do a little research through the 'More like this' panel to the right of your initial post.    Each of the threads also contains more leads so it is amazing how much you can learn from them.
    Good hunting.

  • 'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    'An unknown error occurred' when exporting the ibook. And it failed to preview on ipad, too.what can I do? Thanks!

    One of the following steps should help.
    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Web Content:  > "Enable Plug-ins".
           or
        Internet Plug-ins >  "Allow all other plug-ins
    3. Check  whether you are currently  in  YouTube HTML 5 trial.
         http://www.youtube.com/html5
        At the bottom  left of the page  uncheck the box beside
       "You are currently in the HTML5 trial".
    4. Reset Safari.
        Click Safari in the menu bar.
        From the drop down select "Reset Safari".
        Uncheck the boxes beside all items.
        Check the box beside "Remove all website data".
        Click "Reset".
    5. Turn off Extensions, if any.
        Safari > Preferences > Extensions
         Now try YouTube.
    Best.

  • TS3694 Error 3014 when restoring my 3GS. What do I do?

    Error 3014 when restoring my 3GS. What do I do?
    Tried to sync phone. Insufficient space by 100 mb. Removed all audio, same message when syncing, although almost 4 gb free. Backed up to iCloud,  then tried to restore when Error 3014 came up whilst restoring. What next, as restore stops at this point?

    http://support.apple.com/kb/TS3694

  • I keep receiving an unknown error (-1) when i am trying to update my ios

    i keep receiving an unknown error (-1) when i am trying to update.  My iPad is not even a year old and it saying that it may be a hardware issue?  what gives?

    Error -1
    Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    -1 error
    -1 error too

  • "Unknown Error" Message when saving Illutrator CS3 file

    I get this unknown error message when attempting to save an illustrator file.(CS3). I tried to open and then save several files with the same resulting error message. As a work around, I have reverted to working in CS2 until I can get this resolved.

    Chris -
    Thanks for your quick response.
    Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
    Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
    Tom 

  • An unknown error occurred when Dreamweaver tried to connect to this Contrib

    Hello all,
    I just started having a Dreamweaver problem that's perplexing me...
    I have 2 machines, a G4 and a G5 both running Dreamweaver ( I have MX2004 and 8 on both machines, this problem effects both versions on the G5 only).
    Everything was humming along just fine until the other day when suddenly I was receiving error messages on my G5 stating
    "An unknown error occurred when Dreamweaver tried to connect to this Contribute site".
    Then my local folder containing the website that I was working on would go gray (in Dreamweaver) and lose it's folder icon. It would still look like it was there, just no icon. When I would click on the drop down triangle it would state, " The local root folder, (and the folders name), does not exist. Please select a new local folder by clicking the Manage Sites button".
    I then ran a couple of tests on the G4 and it connected fine, I was able to edit, upload/download, everything as usual. I then attempted to connect to the site with Transmit on the G5...no problem.
    In the site definition I remembered that it may be set up to work with Contribute sites, but this was not the case, the box was unchecked.
    I then had the idea to export the site key from the G4 and grab it onto the G5 and import it into Dreamweaver...I did this AND IT WORKED! Once...after that back to the 2 usual errors.
    I found a work around for now...do my editing/site building in Dreamweaver, and upload with Transmit...this works fine...I've found that the errors only happen AFTER I've connected with the site(s). I've tried this with the other sites I maintain and it was the exact same thing.
    Are there any similar experiences out there? This has really got me stumped... can't imagine what it is.
    Any help would be greatly appreciated.
    thanks
    G5 Dual 2, G4 Dual 1.4 GHZ, iBook Graphite SE   Mac OS X (10.4.4)  

    my firewall is off, everything worked up until a couple days ago when it randomly stopped working

  • 'An unknown error occurred when trying to play the...

    Hello,
    I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
    Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
    I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
    If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
    Many thanks,
    SHyde

    Sounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

Maybe you are looking for

  • Can't burn cd on version 7.2 !!!!

    I have tried burning playlists for my car, and it does not do anything. It asks for a blank disc and says checking media, then it just goes back to the playlist without actually doing anything. Downloading version 7.2 has however solved my backup pro

  • Iphoto book wont open

    all was good and then today I was finishing book and it will no longer open. I can open iphoto just fine but when I click on my book I get spinning beachball forever.............I tried shutting computer off going to disk utilities etc..........still

  • Basic FI queries

    Hi Friends I have some queries, can some body help to explain this: 1. Do Fi persons work on Credit control area , if yes whats the use of credit control area, and where we do the all detail config for this one. 2. how to see the financial statements

  • Permanently stuck in headphone mode?

    is it supposed to change back into speaker mode when i unplug the headphones? because i unplug the headphones and it still says when i adjust the volume "headphones" and it wont even play the audio when i answer calls. only through the headphones. is

  • EMET 5.1 and F-Secure 5.1 do not get along; do other AVs?

    This regards a freshly built (by me) W-7 HP 64-bit PC. After I installed Office 2010 and all updates, I installed F-Secure IS. Then I tried to install EMET 5.1. However, every time I try to start IE11, I receive an "EAF mitigation" error which preven