What is up with the tabs on the updated safari they are giant unless you have like 6 open.  Can this be changed?

Why are the tabs so giant on the updatyed version of safari can this be changed?

Hello:
That is apparently a design "feature."  There is no setting (that I am aware of) to change tab sizes.
Barry

Similar Messages

  • My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?

    My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?  Thanks  Eamonn

    Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail.  I get the error message "disk0s2: media is not present".  Following this I inserted the installation disc and from there ran disc utility.  The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
    I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
    Any ideas of what could be causing this or the best solution?  I fear I am fast running out of options.

  • Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since other millions of people updated and do not have that problem - it means one of two.
    1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
    2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
    here are instructions for restore and you may have to backup before restore.
    iTunes: Restoring iOS software - Support - Apple

  • I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread.  Yet I have read all the emails.  Still the iPhone thinks they are unread.  Does anyone know how I can delete all of these at one time?

    I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread.  Yet I have read all the emails.  Still the iPhone thinks they are unread.  Does anyone know how I can delete all of these emails at one time from the phone?

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • HT203196 My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

    What version of OS X are you using? Exactly which MBA model do you have?

  • My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

    My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

    I'm having the same problem?

  • I.C.S.FOR RAZR & MAXX..Well Not Yet But this is what there Going With the Update Is 6.12.181

    According to a Article i read in Droid-Life I.C.S Soak Test Could Begin Next Week if this is So We should Get the Update shortly after That.. B33
    http://www.droid-life.com/2012/03/30/razr-razr-maxx-and-htc-rezound-receiving-ice-cream-sandwich-updates-as-early-as-next-week/

    If you mean Jelly Bean...  You can read about some of the reported features that it will come with from http://www.techradar.com/news/software/operating-systems/android-jelly-bean-what-we-expect-to-see-1036013
    As for the reason that a carrier does not report any up and coming updates because after a week of reporting the update coming users start demanding that it gets release now, look at the post about the devices that will receive ICS, users are already asking why they haven't received the update that they have been promised even when a release date was never reported.
    And dont forget if they report that the release date had been changed or temporarily cancelled, this is when the lawsuits threats starts.

  • What's up with the new Safari? I've done all the "tips". Still slow!

    I've tried all these prophylactic measures and read an hour's worth of articles about the new Safari (Version 5.0, 5533.16 apparently). But it gets stuck on even the most basic of Internet pages.
    Safari used to load eBay, Associated Content, TED, YouTube, Craigslist, StumbleUpon, etc. in mere SECONDS. Now all I see is a loading bar that gets stuck about 1/16 (just past the www....) in the loading process.
    Yeah, I've cleared the cookies and cache and all the whatnots. I'm not a computer genius but I can tell something is going on. Is Apple keeping a secret record of everything I do or what? Seriously, this is frustrating!
    To summarize:
    I used to pop open Safari and get my homepage, www.google.com, in less than one second. Now I get a blank page that gets stuck, takes about thirty seconds, and then finally finds its way.
    What can I REALLY do to make my new Safari work like it used to?
    Or, how can I get the old version of Safari back?
    And I've tried Firefox and other browsers, but they're messy and not as clean as my ol' Safari used to be. What's happening here?
    I'm not impatient, I just can tell that something wrong is going on. And I'd like to fix it.

    Hi there!
    Thanks for heads up. My Macbook says I'm running 10.5.8 right now.
    The steps I've taken:
    I deleted the weird web icons document (I think it was a .dlb or .lb or something in the Library folder for Safrari in my hardrive) which didn't seem to do much, and I've went to my Safari preferences and deleted all ma' cookies, changes my cookie preferences to "only accept from sites I visit" and I've done the "delete cache" option from the Safari menu as well as the "reset Safari" option (which I regularly do anyway 'cause it seems to keep things moving quickly). I've also restarted my computer a couple of times, usually after completing one of these suggestions.
    I'm using my computer from home on a wireless router thing from Netgear with super-high-speed way-too-expensive broadband Internet from our local provider, Charter. It's called a Negear Wireless Rangemax Router. I've never had a problem with it before, and 3-4 people use the Internet here at my home, often simultaneously, without difficulty.
    I'm gonna' try pluggin' in the ethernet cable now. Thanks! I appreciate it!
    --- I will say, after climbing up on a wobbly chair and plugging my laptop into the cable directly, that it worked a bit faster, but it still got "stuck" (which is what I'm now officially calling this phenomenon). For example, Google loaded in about five seconds instead of ten, and Safari generally responded better to random clicking around on links, but this page got "stuck" at "http://disc..." for quite a while (well, longer than your average modern day computer, I'd say; it still felt like I was on my old Powerbook) and then diddled around a while, until I refreshed the page and it loaded almost instantly.
    I noticed, too, that the biggest problem it seems to have is loading new web pages that I don't visit frequently. For example, I'll search "Leo Tolstoy" on Google, click on the Wikipedia page, and it just stops! The blue loading bar gets to about "http://en.wiki..." and then it just plain stops. Just a few days ago, it would breeze along with super fast speed.
    Thanks again. I appreciate your feedback!
    Something fishy is going on, for sure.
    Message was edited by: danwlawrence

  • What is wrong with the updates?

    Why all my attempts to install the latest updates - iTUnes 7.0.2 and Security Update for 2006-2007 fail on my iMac G5 each time after I have started downloading them? Anyone else with the same issue?
    Zo

    Zo, do you download when Software Update tells you or do you go to something like VersionTracker? Klaus is right that a 10.4.8 combo update ususally takes care of things. What has been happening is that you are trying to update apps that need to be updated incrementally, which is why the combo, which will install all the security and OS inmprovements at one time is a good idea.
    DBefore you run the combo, repair permissions, and make sure to disconnect all firwire peripherals, and run permissions repair after as well, iTunes changes a lot of them for most people.
    Do post back and let us know how you make out,
    Miriam

  • Qosmio F10: What to do with the Update Tool CD after motherboard replacement?

    Hi, Hoping someone can help.
    My F10 has had three new mother boards since the first one broke down. Fortunately I had paid for the extended warranty. However, when it came back this time they had formatted my hard drive because they changed the chip set. Now it can't find a TV signal and the FN Keys dont work. They sent me new CD Roms entitled "Update Tool" and "Qosmio Player Update", but they don't do anything to help the problem. Anybody got any ideas or does it need to got back again?
    Thanks in advance
    Chris

    Ok, I think the engineer will install everything again and will make an update.
    By the way; I think the bundled Qosmio Update Tool CD is a booting CD and its necessary to boot up from this CD to install the proper system drivers for the new hardware components.
    The complete update process will take about ten minutes. Follow the on-screen
    instructions.
    After approximately 5 minutes, the copy process is complete. The message
    The media will update software, please do not remove it. Hit any key to Shutdown
    is displayed. Press any key to shutdown. Turn on the power of the computer and follow the on-screen instructions.
    The Update Tool CD for Qosmio screen then appears and the process of updating the software begins. This can take approximately 5 minutes and the
    computer will reboot to complete.
    The Qosmio Player Update only works if the Qosmio Player was installed on the HDD.
    This is true for original Toshiba image installation.
    Note: Do not install the Player if it's missing!
    - Boot the PC with the QosmioPlayer update CD.
    - Select desired language with allow key and press the Enter key.
    - Select desired Country/Region Code and Keyboard Code with allow key and press the Enter key.
    - Follow the on-screen instructions

  • When I rip a CD to iTunes. All goes well until I click on All Albums. If there are other artists named with the Title Artist they are shown as different albums so I end up with 16 albums containing 1 track instead of 1 Album with 16 tracks. Can I fix this

    When I rip a CD to iTunes all goes well until I click on All Albums. If there are other artists named as well as the Title Artist, I end up with what appears as 16
    Albums with 1 track instead of 1 Album with 16 tracks. Can I fix this ?

    Had a similar problem with two tracks from a cd being segregated in a separate list, but with the same album title and artwork as the other 19 tracks. I found that by double clicking the artist field next to the album icon you can then edit that info.  In your case it sounds as if you might want to erase the artist info altogether. Once you have done that, all the tracks magically group together, as they should have done in the first place. Oh there might be a dialog box first, asking if you really want to do this.
    Hope this helps.

  • My Tags that started with a number are gone! I've tagged links with the tag: "3D". they are not in my tags!

    I have tagged quite a few links with "3D" : examples of pages that used 3D in their webdesign, interesting 3D software,3D tutorials... They are all gone!
    I have found, for example, the tag "+eclectic" . So extra characters ARE used in tagging.But nothing that has been tagged with a number is in my bookmarks :-(
    Maybe Mozilla should warn users not to tag using a number?
    Thanks a lot for any help!

    As best as I can tell, 20ms is around the "sweet spot". I've tried it at 10ms and almost immediately started getting faults. At 20ms it's a bit intermittent- sometimes it'll run fine for several minutes and then get a fault, sometimes not. I've tried running at 30ms as well but it's hard to prove a fault would *never* happen.
    Part of my problem is that I don't understand what all needs to happen during this timeframe. Is this an internal loop that's running too slowly, or is my Axis interface code running too slow? Would having too many front panel controls/indicators slow down FPGA access? Should I be using some type of buffer to send configuration data, and keep front panel controls to a minimum?
    I understand that front panel controls can use up memory in an FPGA, but I've got enough space, so I assumed that would be OK, but I'm certainly not sure about any of this as it's all quite new to me.
    I did go ahead and start a service request, but I noticed it was possibly a 2-day turnaround. I'm hoping someone can give me a hand on the forums as that's both quicker and more easily accessible for future users with similar problems.
    Edit: I just did a run at 30 ms, and got the fault about 6 minutes into the run. I've got the RT VI running with the front panel on my computer, along with the Distributed System Manager, and am working on other things while it runs. Not sure how repeatable this will be but take it as it is.

  • Wifi erratic on 4S after upgrading and not working even after resetting to factory setting. Why should apple isolate itself from their own product problems  Matter of shame when they are not ready to communicate with the customer means they are dead.

    11:22 (7 minutes ago)
    to AppleSupport
    Dear Sir/Madam Since  the wifi is not coming ON how can I open this diagnostic on the iphone  4S am using and having problem with wifi behaving in erratic manner. 
    Am  a professional engineer for projects and am 68 yrs old. At one time was  looking after a production line manufacturing I C's in semiconductors  manufacturing company of the US.
    Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
    Wife  prefers working on ipad2 or ipad mini while traveling and has iphone 4.  Am using iphone4S with laptop and Dell computer, No apple product is  more than two years old.
    Am having the problem in using wifi on the 4S after it  was upgraded to the latest ios as per the recommendation by your  software of my iphone 4S 
    The wifi card hangs up at  it's own will and even a visit to your authorized service center in  Delhi has not able to help me although they have reverted the ios back  to the
    one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is  not able to some times take the load while working which could indicate  the wifi card is getting heated up.   
    My daughter  who is Masters in 3D Animation is an ardent fan of apple products  working at present in Canada was also gifted by me a 4S about 4 months  back. My daughter-in-law is using iphone4 and an ipad for her professional  works along with a Dell PC in the US. While my son is a fan of samsung  products and does not like an apple product. 
    So in a family we have 7 apple products except MAC laptop/PC. 
    But the fact is, this problem with 4S has  really shaken me up and now it seems your products are deteriorating in  quality while demanding the best pricing structures. 
    Since  this is purely the device and the software of apple problem you may  please replace this set with new one as neither have any time to push  you/ request you after your service centre
    in Delhi told me yesterday this cannot be repaired.   
    The  serial No of my set is DN*****TC0 and was bought from an authorized  dealer and so were the other products from the same dealer in Delhi.  This set is still in showroom condition and
    was never used without a protective cover. 
    Thanks 
    Ashok Dhingra
    D E E Hons B E Tech MBA
    Vasant Kunj Delhi
    <Personal Information Edited by Host>

    11:22 (7 minutes ago)
    to AppleSupport
    Dear Sir/Madam Since  the wifi is not coming ON how can I open this diagnostic on the iphone  4S am using and having problem with wifi behaving in erratic manner. 
    Am  a professional engineer for projects and am 68 yrs old. At one time was  looking after a production line manufacturing I C's in semiconductors  manufacturing company of the US.
    Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
    Wife  prefers working on ipad2 or ipad mini while traveling and has iphone 4.  Am using iphone4S with laptop and Dell computer, No apple product is  more than two years old.
    Am having the problem in using wifi on the 4S after it  was upgraded to the latest ios as per the recommendation by your  software of my iphone 4S 
    The wifi card hangs up at  it's own will and even a visit to your authorized service center in  Delhi has not able to help me although they have reverted the ios back  to the
    one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is  not able to some times take the load while working which could indicate  the wifi card is getting heated up.   
    My daughter  who is Masters in 3D Animation is an ardent fan of apple products  working at present in Canada was also gifted by me a 4S about 4 months  back. My daughter-in-law is using iphone4 and an ipad for her professional  works along with a Dell PC in the US. While my son is a fan of samsung  products and does not like an apple product. 
    So in a family we have 7 apple products except MAC laptop/PC. 
    But the fact is, this problem with 4S has  really shaken me up and now it seems your products are deteriorating in  quality while demanding the best pricing structures. 
    Since  this is purely the device and the software of apple problem you may  please replace this set with new one as neither have any time to push  you/ request you after your service centre
    in Delhi told me yesterday this cannot be repaired.   
    The  serial No of my set is DN*****TC0 and was bought from an authorized  dealer and so were the other products from the same dealer in Delhi.  This set is still in showroom condition and
    was never used without a protective cover. 
    Thanks 
    Ashok Dhingra
    D E E Hons B E Tech MBA
    Vasant Kunj Delhi
    <Personal Information Edited by Host>

  • When slides are updated within a MS Sharepoint slide library, how can you force an alert with the updated slide version going to users who have previous slide versions on their hard drive?

     How can you hardcode/force that when a slide within a slide library (in Sharepoint 2010) is updated, that an alert is sent to the user who downloaded the slide to their hard drive so that they may replace the outdated slide with the recently
    updated slide. There is a tic box option to set when downloading slides from a sharepoint slide library into power point that ensures alerts are sent when the presentation is opened allowing for replacement of the slide. But, it is an option. How can that
    be hardcoded are forced on all slide library users who download slides from the shrepoint library into power point? Is there a workflow that can be written in Sharepoint or an option in power point to do this? Please advise. Thanks.

    Two things to check:
    Add the network folder location as a trusted location in your Flash Global Security settings and then see if the videos will play.
    If the first suggestion doesn't work, get in touch with your network admin dudes and find out if FLV files are disabled from working over the network from that location.  Many times unless a given file format is enabled on a network, the server assumes it's not desirable and won't serve it.

  • HT1338 the mac won't stay on unless you have it plugged in

    hi everyone my baby dropped some water on my mac air in swich it dryed the mac is charge at full but will not tun on with puting the charger on at all time sometimes when it gors uo it says time is june 2008

    Hopefully your MacBook Air is stilll in warranty or you have Applecare? If these problems are persisting after the MBA has had time to dry out thoroughly you need to make a complete backup and then get an appointment to take it to the Genius Desk at the nearest Apple Store or an Apple Certified Repair facility. I would not risk further damage by continuing to attempt to use it.

Maybe you are looking for