What is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.
what is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.
I've found the following on that page for error 9006 :
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Similar Messages
-
I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing
Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder. -
I don't what is wrong with my card I can't buy anything on apple store even free ones I can't download, they said my previous purchase have a problem but I don't how wil I do to solve this problem, I need a help pls
What is the exact error message you're receiving?
-
How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!
See this -> http://support.apple.com/kb/HT2727
-
if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.
Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?
What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action. -
My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?
Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.
-
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?
Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again. -
i tried to conect to the itunes and it told me to conect the itunes support,what does it mean and how do i do this?
It probably means there is some question about your account. You can email the iTunes Store support team at one of the links below:
For USA store: http://www.apple.com/support/itunes/contact.html?form=connection&topic=Connectin g%20to%20iTunes%20Store&subtopic=Connecting%20with%20a%20computer
For Israel store: http://www.apple.com/asia/support/itunes/contact.html?form=connection&topic=Conn ecting%20to%20iTunes%20Store&subtopic=Connecting%20with%20a%20computer
If I guessed wrong, go to apple.com/support/itunes for your country and pick the approriate topic. -
I am having trouble connecting to internet with my iphone 5, Are there any issues with with iphone 5 that would cause this problem?
Perhaps something in Apple's support article on troubleshooting problems with WiFi connections will help:
http://support.apple.com/kb/TS1398
Regards. -
I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!
If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD
-
Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the sleep mode ? How do I check this out ?
You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.
-
can somebody tell me what to do with my iMessage in Ipad 2? before i can send message tru iMessage from my contacts who is having the same applications, for the existing one, i can send message but if i want to send message from a new contact, its not working....
Please Rephrase your query.
-
Hello, I have problems with iCloud. I do not recognize the password and can neither a reset occurs every time I want to do something to stick to iCloud password but does not recognize, what to do? thank you
Stop multiple posting
Maybe you are looking for
-
Ever since I downloaded update 4.3, I don't have any external sound from the speakers. The phone rings fine and some sounds like the clock alarm works, However I don't have any sound from any game app or apps like Pandora, I-Heart Radio etc. All ap
-
How do I use variables in an SQL Insert staement?
I have created two classes, GUI class and DBConnect class. i capture user input in the GUI class. I then call the insert method from the DBConnect passing parameters that I have just captured. The code for the insert method looks like something like
-
Third Party Modules (Library | Develop etc.)
Besides the ability for developers to build plugin extensions (the ones with the .lrplugin extension which are widely called modules as well and reside in a module directory unfortunately), I would like to see the possibility to have third party modu
-
Is there a way to revert to Lion?
Is there a way to revert to Lion from Mountain Lion? Mountain Lion is an ongoing disaster for me. Time Machine doesn't work right, I am unable to Restore, unable to reinstall anything meaningful from Time Machine backups and unable to pull my data f
-
Gurus, I just installed EAS in my database server (and the HSS and other applications are in other server) I can log in to EAS but I cannot create any application. When I right-click Essbasecluster1-Create, the APPLICATION is greyed out. Do I need to