What is use of T.code

hii
What is the use T.COde MEAN in SAP MM ans SRM??
What purpose we have this transaction code in system..
Can somebody explain me in depth detail about the same ..
Thanks

>
MM group wrote:
> hii
>
> But how this T.code MEAN and vendor master and PO are linked ..??
>
> Where is the link between these transaction and vendor master ???
>
> Can some body explain me with some example .....
>
>
>
>
>
> Thnaks
>
> Edited by: MM group on Jan 4, 2011 2:33 PM
Hi,
The delivery address that you maintained with MEAN will have a address number. It is the "delivery or ship to" address for PO or sales order, therefore basically it has no relation with vendor.
When you create a PO, at item level, you will see "Delivery Address" tab. The default address is the Plant address. However, you may use addressed number created by MEAN to replace this address. To do so, just enter the address number and you will get the new delivery address that overwrite the plant address.
Hope this helps
Jason

Similar Messages

  • What is use of t code SHD0.

    Hello There ,
    I wanted to know the use of the t-code SHD0. 
    Can we do recording of screen steps via SHD0 ? If yes , how are we are gng to do it .
    Warm Regards,
    Abhishek .

    Hi,
    the purpose is described at http://help.sap.com/saphelp_nw70/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
    The use is of course restricted to SAP GUI transactions. For the CRM Web Client UI there are other means of customization and personalization.
    Best Regards,
    Michael

  • What is the use of T. code cj8g

    Hi All,
    Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
    Thanks in Advance.
    Chandu

    CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
    CJ88 processes the settlement individually.
    For settlement to run, you need to do certain configuration and maintain the master data;
    Configuration:
    Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
    Settlement Profile
    Master data:
    Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
    Regards
    Sreenivas

  • What is the use of T.Code FBZ2

    Hi Experts
    I want to know the use of T.Code FBZ2 and what is the difference between the F-53 and FBZ2?
    Can I print the cheques or Payment Advices for the T.Code FBZ2.
    Please clearify my doubt.
    Thanks.
    Priya

    HI, priya,
    it is not possible to use fbz2 becz as per SAP standard you have to use for payment advice f-58 tr.code only come to fbz2 is the manual say suppose if you want to change document type u can use that tr.code and that is not advisable.
    better to use f-58 if you want payment advise.
    Regards,
    saltish

  • What is the use of T-code COMAC ?

    Hi all,
    I want to know the use of T-code COMAC and What is the significance of two tabs u201Cselectionu201D and u201CMass processing-material availability check ?u201D in this T-code.
    Thanks

    hi,
    In collective availability check, you can check the material availability of several orders at the same time. These collective availability checks always carry out an overall availability check for each of the orders.
    You can check production orders or planned orders in this way. As with individual checks, the checking rule is determined via the order type (production orders) or the MRP group / plant parameters (planned order).
    On selection tab page you can restrict your selection plant wise, material wise,for production plant, for production plant,for mrp controller and so on other selection criterias are there.
    Mass processing-material avail.check in function field you can select matl.avail.check and execute function let's you to start the function immedeately or in the background.
    regards,
    Lodhi.S

  • What is the use of restriction code in the ipod?

    i'm just wondering what's the use of restriction code because i have this problem, i wanted to lock the camera whenever someone takes a picture on my ipod they can't delete and upload it to there computer, so how to will i do that or how to do that thing?

    Yes, you can setup/turn on restrictions to prevent use of the Camera app.  See:
    iPhone, iPad, and iPod touch: Understanding Restrictions
    Make sure you do not have any third-party camera apps installed and turn on the restriction that prevent installing apps.

  • What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI?

    Expects...
    What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI
    Accounting> Financial Accounting> General Ledger> Corrections> FAGLCOFIFLUP - Post CO Documents to FI
    Thanks & Regards
    Bhagiradha.P

    Hi,
    The real-time integration of Controlling with Financial Accounting was active at the time the CO documents were posted.
    CO documents could be not transferred to financial accounting on behalf of errors which are only known to occur in the following situations:
    - During mass processing such as internal CO assessments or distributions
    - Manual posting of individual CO documents is not possible if errors occur in financial accounting.
    - If real-time integration was not active when the CO document was posted, you must use the report   FAGL_COFI_TRANSFER_CODOCS to transfer these CO documents to financial accounting because they are not in the worklist.
    Regards,
    Eli

  • What is the use of transaction code FAGLGA15

    What is the use of transaction code FAGLGA15.What is its functionality.Please help.

    Hello,
    Yes, you are right. Before ECC 6.0 version the TC: KSU5 has been used for actual assessment. Now in ECC 6.0 the same transaction code has been changed to FAGLGA15. You can execute the actual assessment in test run and if it is ok then run in background.
    Thanks
    Para

  • What is the use of  SWIFT CODE IN BANK ACCOUNTS

    What is the use of  SWIFT CODE IN BANK ACCOUNTS

    HI kishore,
    The SWIFT code is used for identifying banks in international payment transactions.
    see these links for your refernece
    http://sapexperts.blogspot.com/2007/01/bank-accounts.html
    http://www.answers.com/topic/international-bank-account-number
    thanks
    karthik

  • What is the use of transaction code VF24

    what is the use of transaction code VF24. if possible please provide some documentation

    Hi,
    The main use of VF24 transaction code : edit work list for invoice list.
    This enables the user to understand the processes left during the combine processing of invoices.
    like which are left for releasing to accounts, which have still pending payment posting, with respect to the invoice list consisting of the combination of invoices.
    invoice list is a combination of different invoices with same critierias. so to check and process these invoice lists collectively this function is used.
    regards,
    siddharth.
    regards,
    Siddharth.

  • What is the use of t-code MD74 - Reorganising independant requirements

    what is the use of t-code MD74 - Reorganising independant requirements

    basically it to delete the unwanted PIR for the last period.
    Let us say you planned PIR for 100.
    At the end of Period the total salae order were 90, PIR shows 10 excess, this has to be deleted. We can do it manually, but this can be done collectively
    pl go through the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
    With the reorganization function, you can delete planned independent requirements for which there are no sales orders in the database. You can delete the planned independent requirements history.
    A key date is required to carry out reorganization which is calculated as follows: the system checks whether a reorganizing interval is maintained in Customizing for the plant that you want to reorganize. If an interval is maintained for this plant, the system uses this information to calculate the key date. If no interval is maintained for this plant, the system checks whether intervals are maintained for any other plants, and selects the largest interval to calculate the key date. You can change the key date proposed in the initial screen for reorganization.
    You can change the proposed key date when deleting the history. You can set a shorter interval for deleting histories than for deleting the requirements records.

  • What is the use of t-code rsa3??

    use of T-code::RSA3??when 2 use it and how 2 use it??

    Hello,
    Tcode RSA3 is an extractor checker.
    Uses: It will give you the number of records extracted. Then go to BW Monitor to check the number of records in the PSA and check to see if it is the same & also in the monitor header tab.
    RSA3 is a simple extractor checker program that allows you to rule out extracts problems in R/3. It is simple to use, but only really tells you if the extractor works. Since records that get updated into Cubes/ODS structures are controlled by Update Rules, you will not be able to determine what is in the Cube compared to what is in the R/3 environment. You will need to compare records on a 1:1 basis against records in R/3 transactions for the functional area in question. I would recommend enlisting the help of the end user community to assist since they presumably know the data.
    To use RSA3, go to it and enter the extractor ex: 2LIS_02_HDR. Click execute and you will see the record count, you can also go to display that data. You are not modifying anything so what you do in RSA3 has no effect on data quality afterwards. However, it will not tell you how many records should be expected in BW for a given load. You have that information in the monitor RSMO during and after data loads. From RSMO for a given load you can determine how many records were passed through the transfer rules from R/3, how many targets were updated, and how many records passed through the Update Rules. It also gives you error messages from the PSA.
    Hope it helps.
    Regards,
    Amit

  • My I-pad was locked for using the wrong code. What do I have to do to unlock?

    My I-pad 4 was locked from using the wrong code. What do I need to do to unlock it?

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • Can we make use of Transaction code FKMT  for vendor line items

    Hi
    Please advise me whether we can make use of Transaction code FKMT (Account assignment model) for vendor line items as follows:
    For Example:
    Expenditure Account      Dr.       Rs.1000
             To Vendor A                                      Rs.100
             To Vendor B                                      Rs.100
             To Vendor C                                      Rs.100
              To Vendor D                                      Rs.700
    Also please advise me what to give parameters
    Thanks and Best Regards
    Shekhar
    Edited by: Shekhar Yecham on Sep 19, 2008 7:05 AM
    Edited by: Shekhar Yecham on Sep 19, 2008 7:10 AM

    Dear Kulakarni,
    I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
    What is the respective Cube for that  Datasourse.
    I check  0AP_30,but in Business Content that cube is not available.
    Could you please give me guidance.
    Thanks in Advance,
    Srinivasan.

  • How to use property Upgrade Code in detection method "Windows Installer"?

    Hi
    I am a packaging specialists helping our deployment guys to add our software (100rds of installers) as application entries in SCCM 2012. The methods supplied by SCCM seem however quite generic and limited.
    The detection method "Windows Installer" is hardcoded to use the Product Code, why?
    Normal detection of Windows Installer packages are done using the Upgrade Code and the Product Version. Is it possible for us our self to add/reconfigure to use that method or are we forced to use the custom detection method?(both those methods should be provided
    by SCCM to better match Windows Installer architecture)
    Ps. It says in http://technet.microsoft.com/en-us/library/bb632336.aspx for Version that "This
    must be in the standard Windows Installer four-part version number format.", but the version number is 255.255.65535 (which is real stupid) as described by http://msdn.microsoft.com/en-us/library/aa370859(v=vs.85).aspx. Ds.
    Regards
    Pär

    Under LV 7.1 with DSC installed I get the same error code (-2147418113) but "explain error" gives me this.
    "LabVIEW DSC:  (Hex 0x8000FFFF) Catastrophic failure."
    This prompts the question is it possible to set an activeX object running in a container for Full Screen.
    This is probably a Q for MS.
    If it look like it is possible, try to get a VB example and that will tell us what we have to do to make this work.
    Ben
    Message Edited by Ben on 10-31-2005 04:45 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for