What Is Usually the Name or Extension Name of an Object Code File in Xcode 4.2?

Hi. I'm relearning how to program and I'd like to know each term I encounter as much as possible. What's usually the name or extension name of an object source code file in the Navigator (the pane on the left) in XCode 4.2? Thank you in advance & advanced merry Christmas.
Gbu.

Xcode 4 User Guide ; Xcode Basics Help ; Xcode Release Notes
Happy Holidays

Similar Messages

What is the table name and field name for Street 2, street3 in Vendor mast.

Hi,
I have a BDC code for Vendor master. I just need to insert the fields street 2, street3, stree4 and street5 in the code. Can I insert it in the code directly without re-recording? If yes then what would be the table and field names for the fields mentioned above.
Thanks & Regards,
Sriram

Hi Sriram,
   Its a Configuration Setting to bring the Check box ask your SD consultant, else directly insert this try, change your internal table filed here,
PERFORM bdc_dynpro USING 'SAPMF02K'    '0100'.
PERFORM: bdc_field USING 'RF02K-BUKRS' indata-bukrs,
           bdc_field USING 'RF02K-EKORG' indata-ekorg,
           bdc_field USING 'RF02K-KTOKK' indata-ktokk,
           bdc_field USING 'USE_ZAV'     'X',------------------------>this part is check box
           bdc_field USING 'BDC_OKCODE' '/00'.
for street just try this without re-recording,
PERFORM bdc_field USING 'ADDR1_DATA-NAME1'       indata-name1.
PERFORM bdc_field USING 'ADDR1_DATA-NAME2'       indata-name2.
PERFORM bdc_field USING 'ADDR1_DATA-SORT1'       indata-sortl.
PERFORM bdc_field USING 'ADDR1_DATA-STREET'      indata-stras.
PERFORM bdc_field USING 'ADDR1_DATA-POST_CODE1' indata-pstlz.
PERFORM bdc_field USING 'ADDR1_DATA-CITY1'       indata-ort01.
PERFORM bdc_field USING 'ADDR1_DATA-COUNTRY'     indata-land1.
PERFORM bdc_field USING 'ADDR1_DATA-REGION'      V_regio.
PERFORM bdc_field USING 'ADDR1_DATA-PO_BOX'      indata-pfach.
PERFORM bdc_field USING 'ADDR1_DATA-STR_SUPPL2' indata-suppl2.
PERFORM bdc_field USING 'ADDR1_DATA-TAXJURCODE' indata-txjcd.

TS1314 how can we transfer jpg file to ipad4 with extension name

how can we transfer jpg file to ipad4 with extension name

See:
iOS and iPod: Syncing photos using iTunes
What do you mean by "with extension name"?

What good are the Panic Logs?

I have reported Panic Logs to my local Apple store and ask that they check the codes to identify what is causing the kernel panics. Here is a sample code below:
I highlighted the codes I mentioned. It seems to me that these codes should identify the hardware or problem area to check. If not, why even produce a log. You would think Apple would have a book of codes to help identify problems. I know hardware testing is necessary and may help identify a problem but sometimes Apple may send memory chips, a logic board when it fact if someone could identify the codes, it may point to something different. When Apple bring parts to your house, they are limited to only 5 replacment parts. These codes would provide a valuable resource but no one seems to take advantage of them, or no one has a clue about how to read or identify what the panic log is saying. Apple will not even contact anyone in development for help. What is your opinion??
Panic (system crashes) log
Size: 4.74 KB
Last Modified: 12/11/06 2:25 PM
Location: /Library/Logs/panic.log
Recent Contents: Sat Dec 2 10:35:37 2006
panic(cpu 0 caller 0x00670CD0): Uncorrectable Fbd memory error detected. ferr = 30000800 , nerr == 00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)0x108cd8 : 0x128d1f (0x3c9540 0x108cfc 0x131df4 0x0)
0x108d18 : 0x670cd0 (0x672e64 0x30000800 0x0 0x8100a4)
0x108da8 : 0x670f64 (0x68ed080 0x68ed080 0x2 0x820044)
0x108e38 : 0x5f3712 (0x68ed080 0x0 0x6552e00 0x0)
0x108e68 : 0x5f359b (0x6544f00 0x0 0x0 0x1c)
0x108e88 : 0x60631c (0x1c 0x108ef8 0x8 0x607dd9)
0x108eb8 : 0x6064c6 (0x6540b1c 0x17 0x653a04a 0x6543d20)
0x108f18 : 0x61305d (0x64e4668 0x0 0x8e865c22 0x6543e00)
0x108f38 : 0x68d4fb (0x64e4668 0x0 0x646ec80 0x0)
0x108f68 : 0x5f97c5 (0x6535500 0x0 0x653ad00 0x49)
0x108f88 : 0x5f2c1f (0x6519800 0x0 0x653ad00 0x49)
0x108fa8 : 0x3b9d21 (0x653a880 0x0 0x653a700 0x49)
0x108fe8 : 0x19aa20 (0x47b93e30 0x47b93e30 0x19ba76 0xd92000)
0x47b93f18 : 0x1a42f5 (0x18 0x1 0x4ae85c 0x6)
0x47b93f38 : 0x19d871 (0x0 0x0 0x47b93f68 0x206)
0x47b93f58 : 0x135f23 (0x0 0x0 0x0 0x19d23a) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleMCEDriver(1.1f1)@0x66d000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5ed000
com.apple.driver.AppleAPIC(1.2.0)@0x68c000
com.apple.driver.AppleACPIPlatform(1.0.5)@0x5f1000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5dd000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5ed000
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386

If you received this exact error code in your Panic Log:
Uncorrectable Fbd memory error detected. ferr = 30000800 , nerr == 00000000
please tell me how Apple solved the problem?
Did they replace the memory? If so, how did they narrow down what chip was at fault.
Did they replace the logic card? Apple came to my house and could not remove the screws to take out the old motherboard. They indicated they have found that to be a problem with others.
Any other solutions to this panic log that Apple was able to solve?

What is the table for query name

Hi All,
I need an urgent requirement for removing duplicate technical query names from the production. Since there are few issues with the SAP given program I am customizing the SAP Program. Can any one tell me what is the table where the QUERY NAME and it's technical name can be found?
Thanks,
Alex.

hi Alex,
try RSRREPDIR, RSZCOMPDIR.
there is one oss note all the tables.
Table containing Work Book and query relation
Query Detailes
oss 792779
Symptom
Report ANALYZE_RSZ_TABLES is designed as a check-tool for detecting and solving different types of inconsistencies in the main query definition database tables.
The program is recommended for BW system administrators.
Other terms
Query definition, query, reusable, component, variable, missing elements, missing records, missing UID, INCONSISTENCY, RSZELTDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZCALC, RSZSELECT, RSRREPDIR.
Reason and Prerequisites
ATTENTION: the described version of the program is delivered with the following Support Packages:
SP27 for release BW 3.0B
SP21 for release BW 3.1C
SP13 for release BW 3.5
All versions of this report available in systems before those Support Packages are test versions which can be used only for information purposes.
Check prerequisites
Checks are possible only for elements in object version 'A' (active) and 'D' (delivered).
Checks for query elements in 'D' version are possible only in the systems which are set as content.
Checks description
Report performs checks in the tables containing the parts of the definitions of queries and query components: RSRREPDIR, RSZCOMPDIR, RSZCOMPIC, RSZGLOBV, RSZELTDIR and RSZELTXREF.
1. Table RSRREPDIR
The table RSRREPDIR is a header table of the generated reports. Consistency of query definition in this table allows to select a query in the Open Dialogs of fronted application and to call report generated for this particular query using transaction RSRT.
The following errors can be found:
- queries with missing definition;
- queries with missing GENUNIID;
- queries with technical names different than in RSZCOMPDIR;
- non-queries in the table.
1.1 Queries with missing definition
The queries are available only in the table RSRREPDIR and not found in the table RSZELTDIR in the corresponding object version. Such queries (in active version) can be accessed only from RSRT transaction. An attempt to execute such query will return the short dump 'Exception condition INCONSISTENCY'. The error also happens during query generation in RSRT or during mass regeneration of the queries using RSR_GEN_DIRECT_ALL_QUERIES report or application menu of transaction RSRT. The inconsistent queries can not be repaired because of missing query definitions. The recommended solution is to delete those records in order to avoid the possible system dumps.
1.2 Queries with missing GENUNIID
Queries having empty GENUNIID field in the table RSRREPDIR. Such queries may be available in the frontend and in RSRT transaction. An attempt to execute such query will return the message'GENUNIID not found'. Situation requires additional investigation at SAP. Create an OSS message for BW-BEX-ET-QDEF.
1.3 Queries with technical names different than in RSZCOMPDIR
The check outputs the queries which have different technical names in the RSRREPDIR and RSZCOMPDIR tables. Execution of a query using the technical name given in Query Designer and stored in the table RSZCOMPDIR will return the error message 'GENUNIID not found'. The system tries to find the corresponding GENUNIID for the wrong COMPID which does not exist in the system or which belong to another query. The recommended solution is to correct the wrong COMPID in the table RSRREPDIR via corresponding procedure.
1.4 Non-queries in the table
The table RSRREPDIR normally contains only reports. Query elements of other types should not exist in this table and can be deleted. In case, when such records exist in the table an attempt to access them in RSRT returns the error message 'GENUNIID not found'. The recommended solution is to delete those records from the table using the corresponding procedure.
2. Table RSZCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for queries and other reusable query components (STR, RKF and CKF).
The following errors can be found:
- local elements in RSZCOMPIC;
- components with inconsistent definition;
- components based on non-existing InfoProviders;
- components based on non-active InfoProviders.
2.1 Local elements in RZSCOMPIC
The table RSZCOMPIC contains an InfoProvider assignment for the reusable components. The local elements and also variables have no InfoProvider assignment and should not exist in this table. Those elements can be deleted via corresponding procedure.
2.2 Components with inconsistent definition
The reusable queries or query components existing in the table RSZCOMPIC, but not found in the table RSZELTDIR. Those reusable components may return 'Exception condition INCONSISTENCY' dump during accessing/execution. The situation may have different outcomes and has to be investigated at SAP. Create an OSS message for BW-BEX-ET-QDEF.
2.3 Components based on non-existing InfoProviders
Queries or query components are assigned to the InfoProviders which do not exist anymore in the system. Queries without InfoProvider are not available in Open Dialogs of frontend applications, but can be executed in RSRT. The execution will return the error message'InfoProvider not found'. The recommended solution is to delete the unnecessary components. Deletion of these queries or query components can be done directly from the list using corresponding procedure similar to RSZDELETE transaction.
2.4 Components based on non-active InfoProviders
Queries or query components which are assigned to the InfoProviders which do not exist in the system in the active version. Queries without active InfoProvider are not available in Open Dialogs of frontend applications. In case, an affected query is technically consistent, an attempt to execute it in transaction RSRT will return the message 'Activate the XXX InfoCube / InfoProvider again. Message #BRAIN 056'. Quite often this error is combined with other errors like missing GENUNIID in the RSRREPDIR or other inconsistencies. Each case has to be investigated in order to get the current status of this object. If the affected query is useless, it can be deleted from the system using transaction RSZDELETE.
The check is available only for the query elements in object version 'A' (active).
3. Table RSZCOMPDIR
The table RSZCOMPDIR is the directory table containing the main properties of all reusable components.
The following errors can be found:
- duplicated technical names (COMPID);
- components with inconsistent definition;
- components without InfoProvider assignment;
- components with missing OWNER.
3.1 Duplicated technical names (COMPID)
The check outputs queries or other reusable query components which have duplicated technical names (COMPID).
The error does not cause any dumps in ABAP or terminations in Query Designer, but may cause several symptoms in different reporting areas:
different queries are available in BEX Analyzer and RSRT under the same name;
wrong query is used as Data Source for Web Template (Web Reporting, Reporting Agent, Broadcasting, MDX);
replacement of variables does not work... etc.
The recommended solution is to provide a new technical name for the duplicated component using corresponding procedure.
ATTENTION: in case when there are only 2 components with the duplicated technical name, only one of those 2 components can be renamed using the corresponding procedure.
The alternative solution for renaming the duplicated technical names is to use the ABAP report RENAME_DUPLICATE_ELEMENTS.
3.2 Components with inconsistent definition
Reusable query components which are not found in the element directory table RSZELTDIR are displayed. This situation may cause the short dump 'Exception condition INCONSISTENCY' during accessing the affected component in Query Designer or execution the affected query in RSRT. Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.3 Components without InfoProvider assignment
All reusable query component (except variables) should be assigned to a particular InfoProvider. This assignment is located in the table RSZCOMPIC. When the record is not found in this table, the affected component may become not available in Query Designer in the corresponding InfoProvider. In some cases the error message "Component XXX.. (version A) has no InfoCube assignment". Further investigations are required at SAP. Create an OSS note for the SAP component BW-BEX-ET-QDEF.
3.4 Components with empty ONWER field
Reusable components which have empty OWNER field in the table RSZCOMPDIR are accessible by users having $USER setting in the authorization object S_RS_COMP1 (users which are authorized to their own queries or query components). This leads to authorization concept violation.
For error solution the field OWNER in the RSZCOMPDIR should be filled with any value. Execute the corresponding edit mode in order to fill the empty field with user 'SAP'. This will prevent the potential authorization violation for users with $USER setting and will take no effect on the users without this setting.
4. Table RSZELTXREF
The table RSZELTXREF contains all links and dependencies between the query elements within a query or query component.
The following errors can be found:
- missing elements (INCONSISTENCY dump);
- not supported relations between query elements;
- extended RSZELTXREF check.
4.1 Missing elements
Missing elements are those query elements which exist as the dependant objects (field TELTUID) in the table RSZELTXREF, but not available in the element directory table RSZELTDIR in corresponding object version. In case, when such elements are used in any query or other query components (STR, CKF or RKF), this may lead to ABAP short dump with 'Exception condition INCONSISTENCY' error message in query run-time or design-time. Other known symptoms of this error is, that structures, calculated key figures or restricted key figures are not available in an Info Provider in Query Designer during design-time.
The missing elements which are in use in other queries or query components, can not be automatically repaired or deleted without components where those elements are used. In most cases the manual repair operations directly in the DB tables are required. Create an OSS message for SAP component BW-BEX-ET-QDEF for further investigations and creation of a repair plan.
The missing elements which are not in use in any query or query components, can be deleted from the system via corresponding delete procedure. This deletion will not affect any existing query or query component.
ATTENTION: if missing element is variable, it can be repaired in some cases automatically using the corresponding repair procedure. See table RSZGLOBV check 5.1. 'Variables with inconsistent definition' for details.
4.2 Not supported relations between query elements
Some relations between query elements which are not supported and can cause dumps in ABAP or terminations in Query Designer (for example link STR <--> VAR). Such cases have to be additionally investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
4.3 Extended RSZELTXREF check
The extended RSZELTXREF check outputs 2 situations which, in combination with other conditions in the system, may be responsible for slow performance of all operations which involve select from the table RSZELTXREF and resolving the relations between query elements (query load, query generation, expanding of a variable list for corresponding InfoObject, expanding of a list of reusable components in Query Designer,... etc.):
- records with empty INFOCUBE field
- records which are not used in any query or query component
Records with empty INFOCUBE field
The current algorithm of resolving of relations between the query elements uses an optimization which allows to reduce the amount of data selected from the table RSZELTXREF during such operations are query load, query generate, expand a list of reusable components (STR, CKF, RKF) and so on. All relations between query elements within one reusable component based on one InfoProvider 'N' are also located within the same InfoProvider. The system has to select only records where the INFOCUBE field contain the same InfoProvider 'N' and in addition to this all other records where the INFOCUBE field is empty. This is necessary, because in all BW releases below 3.x the INFOCUBE field was not in the RSZELTXREF table and all components created before 3.x release have this field empty. Selection of records with empty INFOCUBE is required in order to ensure the consistency of processed query.
When the number of records with empty INFOCUBE is quite large (50.000 - 1 mln records), any simple operation which require resolving of the relations may take a long time, because those records are always being selected, loaded to Query Designer and processed in the design-time.
Records which are not used in any query or query component
The program makes a virtual attempt to reconstruct the table RSZELTXREF via resolving the relations between all reusable components existing in the system. All records which are not used in any query or query components are considered as non-used records. Usually these are fragments of old queries or other components which are not deleted due to former errors in the query delete algorithm.
The current version of the program contain only information about those 2 issues. See the OSS note 823804 for additional information.
ATTENTION: the extended RSZELTXREF check is recommended when all critical problems with reusable components are resolved and the system clean-up is done (no useless records in the tables, no useless non-executable queries or other affected query component available).
Starting from SP28 for BW 30B, SP22 for BW 31C and SP14 for BW 3.5 the Extended RSZELTXREF check detects and fixes the following situations:
records used in existing queries or query components with empty INFOCUBE field;
records used in existing queries or query components with wrong INFOCUBE assignment;
records with or without INFOCUBE assignment which are not used in any query or query component.
For further check details read the OSS note 859086.
5. Table RSZGLOBV
The table RSZGLOBV contains the definitions and technical properties of the variables.
The following errors can be found:
- variables with inconsistent definition;
- variables with missing or incorrect properties;
5.1 Variables with inconsistent definition. Variable not found in RSZELTDIR/RSZCOMPDIR tables.
The variable existing in the table RSZGLOBV, but not existing in the tables RSZELTDIR or RSZCOMPDIR have inconsistent definition. These situation may return 2 different error messages. When a variable is missing in RSZELTDIR table (or in both together), an attempt to expand a list of variable under a corresponding InfoProvider or a list of text/formula variables will return a message 'Inconsistency in loading...'. All variables which are created for corresponding InfoProvider, text/formula variable are not available. When a variable is missing in the RSZCOMPDIR table only the error message is 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded' in Query Designer.
In both cases the variables can be repaired via the corresponding procedure provided in the program under the technical name (COMPID) corresponding to the name in VNAM field in the table RSZGLOBV with the text 'REPAIRED BY SAP'.
As an alternative solution, when the affected variables which are not used in any query or query component can be deleted directly from the RSZGLOBV table. Both solutions will fix the reported symptoms.
ATTENTION: it is recommended to open a repaired variable in Variable Wizard of Query Designer and to adjust the definition of this variable, when it is necessary.
ATTENTION: deletion of the affected variables missing in the table RSZCOMPDIR is not possible using transaction RSZDELETE. An attempt to delete such variable will return the error message 'Component not found'.
5.2 Variables with missing or incorrect properties
Several errors can be found within this check. The variables of different type have their own sets of properties. Missing or incorrect properties may cause different error message during execution of a query where such variables are in use. In the case of the affect variables with processing type 'replacement' , the replacement may not work because of the problem.
Each case has to be investigated at SAP. Create an OSS message for SAP component BW-BEX-ET-QDEF.
6. Table RSZELTDIR
The table RSZELTDIR is the main directory table containing all query elements available in the system.
ATTENTION: the RSZELTDIR check may take a long running time depending upon the table size.
The following errors can be found:
- local elements not in use;
- reusable elements not in RSZCOMPDIR table;
- reusable elements not in RSZCOMPIC table;
- structure (STR) without structure members;
- selections or RKF without definition in RSZSELECT table;
- formulas or CKF without definition in RSZCALC table;
- variables (VAR) without definition in RSZGLOBV table;
- queries (REP) without entries in RSRREPDIR table.
6.1 Local elements not in use
Local elements (field REUSABLE = false) which are not used as dependant objects in the table RSZELTXREF. These elements are useless and not accessible from Query Designer. Usually these are fragments of the definitions of old queries accumulated in system because of different problems with save/delete procedures which are not accessible by the end users. The recommended solution is to delete those elements using the corresponding delete procedure.
6.2 Reusable elements not in RSZCOMPDIR table
Reusable elements (field REUSABLE = true) must have a corresponding entry in the table RSZCOMPDIR which contains the definition and properties of this reusable component. An attempt to load such component in Query Designer may cause the error message 'Missing UID XXXXXX... in RSZCOMPDIR! You may continue to work, but this component is not loaded'. Additional investigations are requires at SAP. Create an OSS message for BW-BEX-ET-QDEF.
ATTENTION: Deletion of such affected components is also not possible using transaction RSZDELETE. An attempt to delete will return the message 'Component not found'.
6.3 Reusable elements not in RSZCOMPIC table
Reusable elements (field REUSABLE = true), except variables (DEFTP = 'VAR'), must have a corresponding entry in the table RSZCOMPIC which contains an InfoProvider assignment for reusable components. When a reusable component has no InfoProvider assignment it may be not available in Query Designer during design-time. Additional investigations are required at SAP. Create an OSS message for BW-BEX-ET-QDEF. In case the affected component is useless, it can be also deleted from the system using transaction RSZDELETE.
6.4 Structures (STR) without structure members
Reusable and non-reusable structures (DEFTP = 'STR') should have dependant elements (structure members). When these structure members are not found a query containing this structure returns the error message 'Element structure not correct' during generation or execution in RSRT or BEx analyzer. The program outputs a query technical name where such structures are used or the technical name of an InfoProvider if the affected structure is reusable and not used in any query. In this case it can be accessed from any query created in the same InfoProvider in Query Designer. The solution is to open the affected structure in using the latest available version of Query Designer and to create the required structure members in order to avoid the error message.
In case, when the affecter structure is local (non-reusable) and is not used in any query, this structure is not accessible by frontend users and can be deleted from the system by corresponding procedure provided in the program.
6.5 Local selection of RKFs without records in RSZSELECT table
Local selections and reusable Restricted Key Figure (DEFTP = 'SEL') usually should have the corresponding records in the DB table RSZSELECT. The program outputs all selections found in the system which have no corresponding records in the RSZSELECT table.
Usually this issue has no impact on the existing queries and produces no error messages. There are 3 possible types of selections within a query:
Normal selection - this selection represents a characteristic in Row, Columns or Free Characteristics area, Conditions or Exceptions. This situation produces no error messages, but the selection is not taken into account by OLAP.
Dummy structure member - structure member type selection can be defined using Query Designer. Such structure member produces no selection and can be used only as place holder within a query. This situation produces no error messages during generation/execution of a query containing a structure with those dummy structure members.
Cell selection - this type of selection is usually used as Cell selection and can be defined using Cell Editor in Query Designer. This situation produces no error messages, but the selection is not taken into account by OLAP.
If it is necessary, the selection definition can adjusted using the latest available version of Query Designer. The affected local selections can be accessed from the queries presented in the WHERE-USED (INFOCUBE/QUERY). The Restricted Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local selection is not used in any query or query components the recommended solution is to delete this selection using the corresponding delete procedure.
6.6 Local formulas of CKFs without records in RSZCALC table
Local formulas (DEFTP = 'FML') or Calculated Key Figures (DEFTP = 'CKF') should contain definition of the calculations in the table RSZCALC. When such definition is not found in the table RSZCALC the queries or query components which include those affected objects can not be generated or executed by OLAP. An attempt to generate such query returns the error message 'The (sub) formula XXX... is not available'.
The definitions of the affected formulas or Calculated Key Figures can be adjusted using the latest available version of Query Designer. The adjustment of a local formula is possible from the corresponding query listed presented in the program. The Calculated Key Figures are available in Query Designer from any query created on the corresponding InfoProvider.
In case, when a local formula is not used in any query or query components the recommended solution is to delete this formula using the corresponding delete procedure.
6.7 Variables without records in RSZGLOBV table
Variables (DEFTP = 'VAR') should exist in the table RSZGLOBV. The table RSZGLOBV contains all processing properties and definition of the variables. Query where such variables are used can not be executed without problems.
The repair procedure is not possible, because of missing definition. In case, when such variable is not used in any query, the recommended solution is to delete it from the system in order to avoid potential problems. If the affected variable is already used in other queries or query components, create an OSS message for SAP component BW-BEX-ET-QDEF. Further investigations and possible repair plan have to be created at SAP.
6.8 Queries without records in RSRREPDIR table
Queries (DEFTP = 'REP') should exist in the table RSRREPDIR. The table RSRREPDIR is a header table of generated reports and also a part of the database view V_REP_JOIN which provides data for the BEx Open/Save Dialogs.
A query which does not exist in the table RSRREPDIR is not accessible via RSRT transaction (error message 'GENUNIID not found') and not displayed in the Open/Save Dialogs of fronted applications.
The recommended solution is to delete such queries using the corresponding procedure provided in the program and similar to RSZDELETE.
In some cases the repair procedure is also possible. The success of the repair procedure depends upon the consistency of the affected query, the existence of a valid InfoProvider for this query and some other factors. For repair attempt create an OSS message for the SAP component BW-BEX-ET-QDEF.
hope this helps.

Cannot install "plugin/extension name" because Firefox cannot modify the needed file. This is happening for any and every kind of plugin theme you could think of. This started when I upgraded to Firefox 11 just now.

I just upgraded to Firefox 11.0 (unwillingly) and I get the following whenever I try to install ANYTHING at all. Themes, add-ons...it doesn't matter, the result is the same.
"Cannot install "plugin name here" because Firefox cannot modify the needed file.
If the fix requires installing a plugin...well, that's not going to work obviously.
Anybody know how to fix this?

You shouldn't see such an error. 
That error usually indicates that an extension or dictionary needs to be unpacked to make it work.
Firefox 4 and later no longer unpacks an extension automatically, but renames the XPI file to the ID of the extension and copies that file to the extensions folder in the Firefox Profile Folder.
If an extension needs to be unpacked then there should be an unpack directive (<nowiki><em:unpack>true</em:unpack></nowiki>) in the install.rdf file of that extension
You can try to set the Boolean pref extensions.alwaysUnpack to true on the about:config page.
*http://kb.mozillazine.org/about:config
* https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking

What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored?

What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored? Basically, what folder is Firefox's equivalent of Temporary Internet Files?

You can find the location of the cache on the about:cache page (open that page via the location bar like a website).
Only large image and media files are stored as individual files on disk. 
Other files are stored in a few large container files (_CACHE_XXX_) in the cache folder and not as separate files on disk. 
The individual files on disk have random names without a file extension for security reasons: you can't open an application or start a downloaded virus inadvertently by clicking a file in the cache folder. 
You can look at this extension for easier access to files in the cache.
* Cache Viewer: https://addons.mozilla.org/firefox/addon/2489

What determines whether the Label name and/or Caption appears in the context help window but in other cases, both the label and caption appear in the context help window?

I am trying to polish an application, and find that I cannot seem to reliably control which of the label or caption text appears in the context help window because I don't understand what rules are in place to determine which should appear. It seems like if I reate a named constant, then use it's right click menu command "Create Indicator" I get a control with only a Label (as long as I don't add a caption). This then appears in the context help window as the label name followed by the description text (after entering some description text). But if I add a caption, the label name is shown in bracket
s which is a 'feature' I would like to avoid, because I have certain controls where I would like to use a descriptive variable name on the block diagram side without using so much space on the front panel. It seems like there is no way to avoid showing the Label name in the context help for a control/indicator. Is this true?
I thought the purpose of having a seperate caption was to make the text that appears with a control programmatically controllable, but if that control is not extended to what appears in the context help window, it limits the usefulness of the caption and forces me to re-consider some Label names. However, the problem goes deeper than that because then even when I make the label and caption exactly the same, or if I delete (via a select caption text-backspace or select caption text- delete key .. sequence) the caption for a control, the label name in the context help window still appears in square brackets!
Can I have complete control over the context help fo
r a particular control (or has anyone found a third-party context help solution that functions compatibly with LabVIEW 7 in a built application that they will be so kind as to recommend?)
I have used LabVIEW for three years, and I am now using LabVIEW 7.0.

Sorry for that.. I was changing the text of my question and didn't read carefully enough in the preview stage. I wanted it to read "What determines whether the Label name and/or Caption appears in the context help window?"

I have a 2nd generation Ipod. I have it connected to my computer and see (my name) ipod on my screen. Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do: The Ipod, (my name) is synced with another ITunes li

I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.

If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY!

What is the field and table name to describe -Employee Hourly Rate or Emplo

Hi,
Can any one please tell me what is the field and table name to describe
Employee Hourly Rate or Employee Rate.
Thanks for ur time.
Murali.

Hi Murali,
The hourly rate is tied to a Wagetype & maintained in Infotype 0008. The database table is PA0008.
the field could vary depending on the No of wagetypes maintained.
regards,
Suresh Datti

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have. To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them). You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another. You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well.

What's the difference between "Full Name" and "Account Name"

Just re-install a new OS X Lion. On the "Create Your Computer Account" screen, what's the difference between "Full Name" and "Account Name"?

Your computer name by default would be "John David Appleseed's Macbook Pro"
But you can always change that in System Preferences->Sharing
And yes, the first account you set up will be an administrator.

Whats the fieldname and table name for purchase order delivery date

hi all,
whats the fieldname and table name for purchase order delivery date
thanks and regrads

EKET-EINDT is the delivery date according to the schedule lines.
for example the line item has 100 qty.
it is sent in three schedules (40, 40, 20).
Then EKET will have 3 records for one PO Line item.
The final delievry data is the EKET-EINDT for the 3rd schedule line item.
Regards,
Ravi

What is the best way to name a file?

What is the best way to name a file? Use "_" so that the characters make one, long name? Why do that?

Another take on naming files, particularly image files, is like this:
I use a file remaning application like Name Mangler to back, sequentially rename the photos. I put them in a folder with a similar name. Using the format I do, YYYY-MM-DD- Description-001.jpg, they are easy to sort by date by sorting alphanumerically.
OT

How to get file name on the base of extension

hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khan

Here's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching.

What Is Usually the Name or Extension Name of an Object Code File in Xcode 4.2?

Similar Messages

Maybe you are looking for