What is Verizon preferred DNS settings?

What are the preferred DNS servers to use for FIOS in NJ (Chatham to be specific)?  Thanks.

For Verizon DSL, see as need be.
http://www.dslreports.com/faq/1591
My educated guess: For Verion FIOS, they may be the same as Verizon DSL.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

  • Redundant domain controller DNS settings

    Hi guys,
    We have two domain controllers, both DNS and GC. I am curious as to what the recommended IP DNS settings should be for both DCs? I think it is like this...
    DC1
    DNS1 - DC2
    DNS2 - DC1
    DC2
    DNS1 - DC1
    DNS2 - DC2
    Is this the right setup?
    Thanks
    Aaron

    Is this the right setup?
    Yes it is correct. I would go with 127.0.0.1 for 'Alternate DNS server'.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • What do I enter for DNS settings?

    I was looking through my mail log files and discovered my domain wasn't being resolved correctly. So I did sftp in Terminal and it returned an error that mail.myserver.com could not be resolved.
    My servers IP address 192.168.88.8 and my DNS Server's DNS settings are 192.168.88.8 and 127.0.0.1. Is this correct?
    Thanks

    External forward and reverse DNS both need to be correct for your mail to be routed into your server and particularly for your outbound mail to be accepted by remote mail servers (and not perceived as a spam engine), and your local network needs to have DNS functional for at least the server. The reverse DNS inherently involves your ISP.
    Put another way, yes, you need DNS for a traditional setup.
    These days, it's usually safest to assume that everything needs DNS.
    If you're not on a business-class DSL service, you'll end up establishing a relay through an authorized mail server somewhere else; with what amounts to relay through an SMTP mail server elsewhere with valid DNS.

  • Help with Preference pane DNS settings for Mail

    I have a mail (not Apple Mail) issue with my Entourage Mail. I keep getting
    the following error message and I have verified the server settings in my
    mail accounts are correct for ATT that uses pop.att.yahoo.com. I manage to
    get mail most of the time but I still get the following error message:
    Error Description
    Error:
    Entourage cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.
    Explanation:
    Could not retrieve mail
    Error: -1370
    My System Preferences/Network/Advanced/DNS point to my 2wire Gateway combo
    modem/router. The router is set for Automatic DNS. I tried changing it to manual
    and it did not works any better.
    If I change the DNS setting in the preference pane in OS X, will it really use that
    DMS address and bypass the router?
    I played around with the namebench utility
    http://www.macupdate.com/info.php/id/32784/namebench and each time you
    run it, namebench makes a better recommendation - saying something is faster
    than the previous recommendation.
    I am lost on what I need to do correct the Network pane of my System Preferences.
    Should it point to the router or to good DNS?
    I do not think this is a Microsoft Entourage issue.
    Have others seen this issue or is unique to my setup.

    Going to sleep on and see how it works in the morning.
    The problem is solved and I have checked the Yes button that my
    question has been answered. The following is a copy of a posting
    two days ago to the Microsoft Entourage group that should work
    just as well for Mail users.
    If you are tied of getting the following Entourage error
    message -3170 over and over again, read on.
    Error:
    Entourage cannot find the server. Verify the server information
    entered correctly in the Account Settings, and that your DNS
    settings in the Network pane of System Preferences are correct.
    Explanation:
    Could not retrieve mail
    Error –3170
    Thanks to a tip from Diane Ross I have gone two days without
    getting the error message.
    First, I know the Account Settings for my ATT DSL service
    have been correct for some time and have not changed.
    The short version of the fix that worked for was to open
    the OS X 10.6.3 (Snow Leopard) System Preferences/
    Network/Advanced/DNS panel and add some better Domain
    Name Servers from my location.
    The default (or before) OS X setting was:
    DNS Servers: Search Domains:
    192.168.1.254 gateway.2wire.com
    Note both were dimmed. The server listed tells OS X to use
    the ATT provided combo 2wire modem/router for my DSL service.
    The change that seem to have worked for me was to leave the
    Search Domain the same; however, I added some good servers that
    bypass the 2wire gateway with its automatic DNS setting.
    DNS Servers: Search Domains:
    208.67.220.220 gateway.2wire.com
    208.67.220.222
    65.68.49.51
    192.168.1.254
    I found the ‘good’ or better DNS Servers by making several runs
    using the free Google utility called namebench 1.2
    <http://www.macupdate.com/info.php/id/32784/namebench>
    This utility takes some time and will make suggestions from your
    location. If you add the namebench recommendation and run it
    again it will find a better recommendation. I had to make several
    runs to find the better DNS Servers for my location. The first or
    primary is called OpenDNS, the second is a backup for the OpenDNS
    and the third is SBC Global TX now owned by ATT and I live in
    Texas. Note I ended with the default IP address.
    FYI, I tied using the selected servers in the 2wire gateway in the
    manual mode rather than the default automatic mode and it just
    did not work right. Some pages would not open and others were
    slow. For this reason I run the router in the automatic mode for
    DNS and control things using the OS X Network preference pane.
    The addition of preferred DNS Servers in my Preference seems
    to have slowed down and hopefully stopped Entourage 2008
    version 12.2.4 -3170 error messages.
    Message was edited by: aRKay

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • VPN Client and DNS settings

    Hello,
    here are few posts (quite some time ago) telling the same trouble:
    The VPN Client does *NOT* restore the original DNS settings.
    Upon BM3.8.2 Massimo told, that this is a bug in that version of the VPN
    client. I face this issue with 3.8.16 and nwclient 4.91.4 with or without
    the three currently available hotfixes [1]
    Anybody else facing this trouble with the current VPN client release?
    May be an older one works better, any experiences?
    This trouble is fact even after clean disconnects. But it happens only now and then,
    I might need to try it 50 times to see it once.
    a followup in CMD boxes with ipconfig /all does show, that the times
    to restore the original DNS settings vary from 2 to 30 seconds. Mostly about 5 seconds.
    Massimo also told, that a "VPN-down" due to a Win-Shutdown can cause this: So is
    there a possibility to trigger a "clean-VPN down" in the Win-shutdown sequence?
    As a workaround I packed this line into all users "run" key:
    netsh int ip set dns name="LAN-Verbindung" source=dhcp
    so at least after a reboot it's corrected.
    Any suggestions appreciated,
    [1]
    Novell Client 4.91 Post-SP2/3/4 NWSPOOL.DLL
    Novell Client post-4.91 SP4 LGNCXW32.DLL
    Novell Client 4.91 Post-SP4 NWGINA.DLL 1
    IT-Beratung Rudolf Thilo
    Schweinfurter Str. 131
    97464 Niederwerrn
    t: +49 (0)9721/6464840
    f: +49 (0)9721/6464841
    m: +49(0)171/685 9 685

    Hello Craig,
    thanks for your answer.
    [VPN Client sometimes doesn't restore DNS settings after disconnecting]
    e.g. TID 10096552 is telling such a trouble, that should be fixed with
    BM VPN Client 3.8.10
    > > Any suggestions appreciated,
    > >
    > This one seems to be so related to the design of the VPN client that
    > you may need to open an incident to get it fixed, if that even would
    > help.
    >
    > There used to be a utility designed to clean up after the VPN client,
    > but I can't remember now what it was. I never tried it that I can
    > remember.
    Anybody else who knows about that tool?
    After doing some "teachment" to these VPN users the incidents of this
    trouble didn't show up as frequent as before. So I assume, that one
    reason might be this:
    Scenario
    VPN connect
    PCA connect to host in corporate LAN
    PCA full screen *SHOULD* be activated (ALT+ENTER)
    working, working, working
    shutdown PC in corporate LAN
    close VPN tunnel
    shutdown local home office PC.
    When it was missed to activate PCA fullscreen without noticing this,
    then the "remote" start button is not visible.
    So instead of shutting down the remote PC, the local PC is shut down.
    By that, the local shutdown is killing (not cleanly disconnecting)
    the VPN client. When this happened (and I 100% can reproduce this)
    after the next boot of the home office PC the VPN connect will *ALWAYS*
    fail. After another reboot the VPN connect will succeed again without
    any problems.
    Is this a known issue? (I cannot find that TID I found before telling
    missbehaviour when VPN connects are not disconnected clean. IIRC this
    was something fixed in a VPN client version /several/ subversions ago)
    Home Office PC = XPSP2+Hotfixes, VPN Client BM 3.8.16, nici from that
    one first, now taken from NWClient 4.91.4, no difference.
    Regards, Rudi.
    IT-Beratung Rudolf Thilo
    Schweinfurter Str. 131
    97464 Niederwerrn
    t: +49 (0)9721/6464840
    f: +49 (0)9721/6464841
    m: +49(0)171/685 9 685

  • No DNS settings when using built-in (hardwired) ethernet

    Iv'e never had an issue with wireless operation, but now that a wired connection is necessary, I've run into something strange.
    When connecting to a LAN with a DHCP source providing IP, router, DNS settings and more, the ibook fails to populate the DNS settings. I've got a valid IP and gateway address but no DNS servers are defined. I can put them in manually, but that would require me to change them each time I connect to a different wired network instead of relying on DHCP to do it's job.
    Has anybody else seen this issue?

    If (as you say "is the case") this is a small, Netgear cable router...then the Netgear will be acting as DNS server. Likely the Netgear is getting a dynamic IP address from ISP, or it's been set with static values the ISP has told the homeowner to enter into the Netgear. Either way, DNS will be provided to Netgear, and the Netgear should be sending the DNS on down to the client computers.
    (Do you "see" any DNS server info in the Configuration panel when you're on wireless? If so, what IP address is that DNS server?)
    Why does it work wireless, but not cabled?
    You really need to go into SystemPreferences>Network>Configure...and tell us what you have configured in the eth0, or built-in Ethernet section.
    It might not be a bad idea to reboot the mac after you plug in ethernet...probably not needed, but we don't know enough about your network settings.
    You also say you can't access sites by name. Can you hit a website using an IP address in the Safari addressBar?

  • Changing Upstream DNS settings

    I have an Xserve running OS X Server 10.4.11 and want to change the upstream DNS setting form my ISP's to OpenDNS. The DNS settings in Server Admin don't seem to provide this option and from what I've read, the system Network DNS setting must point to the internal DNS server.
    I've read some reports that advocate editing /etc/named.conf but the exsiting file is very sparse and doesn't contain any forwarder entries.
    Where the heck are these things set?
    - Tim

    Thanks Antonio
    The Server Admin settings for 10.4 DNS are significantly different than 10.3.9 but the basic info is similar. Everything I read says I must edit the /etc/named.conf file and add the forwarders, but my named.conf file has no forwarder entries yet my DNS server DOES query my ISP's DNS for outside addresses. This must be set somewhere ... but where?
    This is all there is in the named.conf file
    // Declares control channels to be used by the rndc utility.
    // This must be enabled on Mac OS X Server for Server Status to provide valid
    // information! (Remove the leading slashes to enable.)
    // ** STUFF YOU MIGHT NEED TO ENABLE **
    controls {
    // unix "/var/run/ndc" perm 0600 owner 0 group 0;
    As you can see, there is none of the stuff you would expect, so it must be being done elsewhere.

  • Can't save DNS settings - 'Reset'

    Hi everybody,
    I've been trying for a day to setup my DNS to my server (PowerMac G4 running Leopard Server 10.5.4)
    So, I would like to add a primary zone, a machine (the server) and a reverse DNS.
    I can do this (is appears in the list) but when I click 'save', all the settings I made disappearing (well, not exatcly, it only reset all machines/aliases and reverse settings) but I keep the primary zone (if I add a nameserver, click save... the nameserver is not saved/the machine is not created)
    I don't know what I did wrong. I also found a '101' about DNS in Leopard Server... I did the same as the '101'.
    In my system log, I found this:
    +Jul 17 13:41:39 server servermgrd[186]: servermgr_dns: Failed to save zone 'null.' because the zone does not have a nameserver.+
    I don't have a 'null' zone! I've got a tucpasquic.com. zone (it is in the list) and it is kept when I save (tucpasquic.com. is my primary zone)
    Is there something to do to reset all the DNS settings?

    Hi again,
    so, I didn't find why it didn't work... but:
    I created a new zone with the same name of the 'bugged' zone, and it worked, don't ask me why!
    Anyway, I've got a successfull message in changeip:
    +The names match. There is nothing to change.+
    This was the only thing I wanted!

  • DNS settings

    I don't understand why DNS settings appear in the setup both on the LAN side and the WAN side.
    What does this mean?
    Which should be set if  I want all clients to use a specified DNS list?

    seryanhoj wrote:
    EA6350. I am presently using static on the wan side (so I can elect a dns list) and leaving the lan side alone.
    Client devices report the dns as 192.168.1.1. 
    I don't aappear to have a way to determine which dns is actually used externally when a connection is made.
    This mabye by design of Linksys routers:
    https://community.linksys.com/t5/Wireless-Routers/WRT1900AC-s-DHCP-does-not-hand-out-the-specified-s...
    You an still use custom DNS, however the client HW will only get 192.168.1.1...

  • DNS settings for Airport Extreme Base Station

    This month's MacWorld suggests that changing the DNS setting of the wireless device might increase the speed of the connection. What setting should my Airport Extreme Base Station use.
    The Computer system says 10.0.1.1 and it works. When I entered the numbers they suggested I get no connection.
    Any suggestions?

    To change DNS setup on the Airport you need to put in the DNS change on the Internet tab. The Airport will always place itself as the main DNS server to the network clients that connect by DHCP, unless you set the Airport to static IP.. and it will use your ISP DNS server by default.. you can change them if you want. Just type in the new DNS you want to use.
    This month's MacWorld suggests that changing the DNS setting of the wireless device might increase the speed of the connection.
    http://www.macworld.com/article/2824564/slow-internet-edit-your-dns-settings.htm l
    In most cases this is really so minimal as to be insignificant. The airport should cache the regularly used DNS addresses and you can test it by ping to your local DNS or the DNS recommended by MacWorld??.. but honestly a few ms is not going to change the world. To the clients the local network addressing should be still using the Airport as the main DNS.. you can setup manually in each device a different DNS but that can give local network issues as it then has to find local clients by broadcast.
    I have a complex dns setup for other reasons.. getting past geolocks..
    If I ping my local ISP dns I get
    ping 202.76.170.228
    PING 202.76.170.228 (202.76.170.228): 56 data bytes
    64 bytes from 202.76.170.228: icmp_seq=0 ttl=61 time=25.422 ms
    64 bytes from 202.76.170.228: icmp_seq=1 ttl=61 time=25.984 ms
    64 bytes from 202.76.170.228: icmp_seq=2 ttl=61 time=25.504 ms
    64 bytes from 202.76.170.228: icmp_seq=3 ttl=61 time=24.933 ms
    64 bytes from 202.76.170.228: icmp_seq=4 ttl=61 time=25.297 ms
    64 bytes from 202.76.170.228: icmp_seq=5 ttl=61 time=25.258 ms
    64 bytes from 202.76.170.228: icmp_seq=6 ttl=61 time=24.915 ms
    If I ping google DNS. 8.8.8.8
    ping 8.8.8.8
    PING 8.8.8.8 (8.8.8.8): 56 data bytes
    64 bytes from 8.8.8.8: icmp_seq=0 ttl=57 time=37.985 ms
    64 bytes from 8.8.8.8: icmp_seq=1 ttl=57 time=37.562 ms
    64 bytes from 8.8.8.8: icmp_seq=2 ttl=57 time=37.715 ms
    64 bytes from 8.8.8.8: icmp_seq=3 ttl=57 time=37.639 ms
    64 bytes from 8.8.8.8: icmp_seq=4 ttl=57 time=36.845 ms
    If I ping the US DNS server.
    ping 208.122.23.22
    PING 208.122.23.22 (208.122.23.22): 56 data bytes
    64 bytes from 208.122.23.22: icmp_seq=0 ttl=51 time=187.209 ms
    64 bytes from 208.122.23.22: icmp_seq=1 ttl=51 time=187.398 ms
    64 bytes from 208.122.23.22: icmp_seq=2 ttl=51 time=186.681 ms
    64 bytes from 208.122.23.22: icmp_seq=3 ttl=51 time=187.030 ms
    64 bytes from 208.122.23.22: icmp_seq=4 ttl=51 time=186.731 ms
    64 bytes from 208.122.23.22: icmp_seq=5 ttl=51 time=186.967 ms
    It is very obvious the best ping is the ISP dns because the route path is shorter..
    Google is very good but still takes longer and of course dns in another country is much worse.

  • Do DNS settings on Airport Extreme propagate to computers

    I changed my DNS settings on AE ac.  Are these settings supposed to change the settings on every computer on the LAN?  If so, what conditions must prevail (e.g. Sys Pred>Network>Advanced must be unlocked)?

    I've got clients on Ethernet  (6) and WiFi (15).  (Oh, this is a home.).
    I know what it is like.. my router tells me I have 25 clients at the moment.. it is almost unbelievable in modern homes we have that much IP stuff connected.
    I might otherwise have thought it was a business though.
    I have double checked just now.. by using a test setup.
    This is on a newly reconfigured airport (happens to be gen4 but that is not relevant).
    In dhcp Internet mode.. and doing NAT and DHCP the default DNS server passed to the clients is the Apple router itself.
    I have done these tests before but it is good to be reminded.
    So I have this setup.
    And was hoping the DHCP would see the DNS and would pass 8.8.4.4 to the clients. No such luck. Although the AE itself should use 8.8.4.4 and whatever secondary DNS you set.
    There is no place to actually set this up DNS server to the clients in the network tab.. it is typical apple minimalist.. DHCP Range being the only possible thing to set..
    So when I check the ethernet on the computer I get
    So the AE has substituted itself as the main DNS server in the clients. there is no check box to force ISP dns or any other dns values.
    This is pretty much default on any router.. that it will use itself as a dns cache instead of directing clients to the internet directly.
    The actual dns value used by the AE for lookups will be the one set in the internet tab though.. so it does not need to be set to ISP..
    Is that going to work for you.. ??
    If not you can force the clients to accept the DNS values via dhcp from the Airport router but only if you use static IP.
    Now the rub.. you cannot use static IP on the main router, plugged into a cable router. .you must use DHCP so that will not work.
    What you need is a different primary router.. or use one of your express in a different mode. ie doing Static IP.
    I have posted the details of the setup a few times.
    See Re: airport time capsule keeps disconnecting
    I have suggested it for a situation here bridge was unreliable.. but I use this method to assign static IP and special DNS values to clients in my network that require access to US for TV don't you know.

  • HT1529 what is my iMac DNS IP address

    What is my iMac DNS IP Address.  I (think) I need it to get my apple TV to work.  I had it working yesterday and today it says NO.  (I did nothing different, except turned it on!!)  It doesn't recognise that I have authorised my iTunes account (several times).

    You can determine your Mac's IP address by opening Sytem Preferences, selecting Network and then selecting the interface you are using to connect to your home network (either Ethernet or WiFi). As for its DNS IP address, the Mac will not have its own DNS address. This will typically be the IP address of the wireless router, if WiFi is being used, or your ISP.
    For your Apple TV to see the Mac, this will use Bonjour to locate the Mac on the local network. So the important thing is that your Mac and the Apple TV are set to the same IP subnet. This is usually the first three sets of numbers in your IP address, while the last number is known as the network address. For example, a Mac with an IP address of 10.0.1.4 has an IP subnet of 10.0.1 and a network address of 4. For other devices using Bonjour to communicate with this Mac, they also need an IP subnet of 10.0.1 but a different network address to 4.
    The other important IP address setting is the router address, aka gateway. For all devices to communicate with each other on a local network, they must have the same router address, which is the IP address of the wireless router or Ethernet switch.
    Now I don't have an Apple TV so I don't know the network settings menu but I would expect that it is set to DHCP, meaning that it is relying on the router to provide it with an IP address. The theory would then go that you would also set the Mac to DHCP so that the router can allocate a dedicated IP address to the Mac and Apple TV and any other device on your network. If any device is set to manual assignment then this could be your issue. Are you able to confirm what network settings the Mac and Apple TV are using and post back here?

  • DNS Settings for Westell 9100EM Router

    I have continuously been experiencing issues with Verizon's preset DNS setting when using DHCP, and therefore plan to use a different set of DNS servers (I hear that 4.2.2.1 - 4.2.2.5 are recommended in the DC area where I live).
    I wonder, however, where to change the DNS setting in the router.  The 9100EM has primary and secondary DNS settings both for the LAN (i.e. the internal network) (under My Network - Network Connections - Network (Home/Office)) and for the external WAN network (under My Network - Network Connections - Broadband Connection (Ethernet)).
    Are the settings for both networks supposed to be identical, or can I use different settings for the LAN and for the WAN.  
    Any recommendations which DNS servers I should choose for either network connection?
    Thanks a lot

    ralf18 wrote:
    I tried to set the LAN DNS at 192.168.1.1 but receive an error message ("DNS Server cannot have the IP address of Wireless Broadband Router Network").  The same happens when I set the DNS to the external IP address of the router.
    If you are trying to do that in the router's UI, no kidding.
    If you are trying to do that on a computer behind the router, perhaps the router does not act as a DNS Server relay.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How to access DNS settings - AirportUtility ver. 6.2

    My Airport Utility ver. 6.2 appears corrupted & my Airport Extreme Setup Guide has no relevant instructions for accessing & editing  DNS addresses.
    My primary Mac X 10.7.5 and backup Win7 computers are fully functional but both produce 'page not found' and 'server timeouts/not located' browser errors for two specific URLs.  I am told that my OS or hardware is at fault - but as yet cannot confirm what precisely is at fault.  I have added DNS addresses to my Mac with the same results.
    URLs at Issue:
    www.mindmixer.com
    www.activate-wichita.com
    I suspect I need to access the DNS settings for both my Airport Extreme and my cable modem (Motorola Model NVG510).
    Please advise &/or comment  -  Thanks

    Hmm. I managed to get it work for me. By the way, that's my site, it's just pretty old now. I need to fix the downloads and I guess I need to update that article
    I edited the file in TextWrangler, and at some point it changed the permissions on the file to ME, which caused it not to ask me for authentication any longer. But it definitely CAN work. I managed to get all of the frames to show in my Copy of Keynote 6.
    Edit: Wow, I haven't posted here in 5 years.

Maybe you are looking for