What is video rendering error: -50

When trying to "Share" my movie in iMovie 10.0.1 I receive the following error.
The share operation "File" has failed
Video rendering error: -50
This occurs no matter how I try to share it (Theater, itunes, file, etc.) or output resolution. Does anyone know what this means or more importantly how to fix it?

You are not the only one with this problem. Seems like a bug in iMovie.
https://discussions.apple.com/message/24498709#24498709

Similar Messages

  • Video rendering error 3

    What is  video rendering error 3 and how can compressor or final cut pro X be fixed.
    this last update has really created problems for lots of Final Cut users.
    Very little works like it did before.

    Had the same problem, here is what you could do, highlight the project in timeline
    To prepare to send, then go to "file" share master file' once share is completed should
    Automatically be a mov. File,
    Select destination on your computer, Send.
    Find movie in your destination folder then either burn, convert as needed.
    This worked for myself. I tried everything before and was also getting error 3.
    Give it a try. Good luck.    Mark.

  • Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

    Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

    Hi Babowa and Apple:
    Thanks for helping me.   Here is my workflow:
    I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.)  Is that a problem?   Any suggestions?
    I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
    I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD.  I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
    After I have imported media as an event and have labeled an event, "NLGE 3000E,"  then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
    I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
    Evidently a movie is not saved unless it is in "theater"?
    Please see next "reply" for other comments about retrieval.
    Thanks.

  • New project to DVD works fine, but sharing to a Blu ray fails, with a error message "video rendering error 60."  What is that and how do I fix it?

    getting an error message "video rendering error 60" when burning a new final cut pro project to Blu ray.  Burning to regular DVD works fine.  I have burned many other projects successfully to blu ray.  What is this message and how do I fix it?

    If this same timeline can be exported to other file formats and can be shared successfully to DVD, possibly it's the longer render time in the Blu Ray processing that is the problem. In the Finder in Applications, right click Final Cut Pro dot app, choose Get Info and verify that Prevent App Nap is checked. If it isn't, check it and try again.
    Russ

  • Video rendering error: -50 what its that mean

    when i send my movie to file show me video rendering error:- 50

    The same for me. I tried to share my movie on iTunes or to save on my Hard Disk or a mobile one. The message is still the same.
    OS X Mavericks (10.9), i movie 10

  • Video Rendering error 3 Compressor crash

         Hello all,
    brand new on the forum here and have a problem i can't seem to figure out. trying to export a 35 min docu dram off my computer 2.2 i7 macbook pro 8 gig ddr ram os x 10.9.1. I  shot the footage on cannon 5d mark ii, all video is rendered and and color graded. whenever i try to export out of fcp it" unexpectedly quits" regardless of codec chosen. so i send to compresor and then run into video rendering error 3. if anyone knows what this means or has a work around or anything that can help it would be hugely helpful. i am four days away from a deadline on a two year project and cant get fcp or compressor to get the finished thing out.
    help?
    please?
    help.

    Had the same problem, here is what you could do, highlight the project in timeline
    To prepare to send, then go to "file" share master file' once share is completed should
    Automatically be a mov. File,
    Select destination on your computer, Send.
    Find movie in your destination folder then either burn, convert as needed.
    This worked for myself. I tried everything before and was also getting error 3.
    Give it a try. Good luck.    Mark.

  • I keep getting this msg in iMovie10.0.1: Video rendering error: -50

    My movie stops renedering. I get this msg: Video rendering error: -50

    Dear friend,
    Did you find a solution?
    Best regards
    Ricardo

  • Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

    Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
    I'm using FCPX 10.2
    Yosemite 10.10.3
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free

    It appears Apple's latest update has solved the issue. Whew!
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free
    Yosemite 10.10.3
    FCPX 10.2

  • Compressor 4.1 video rendering error 3 ?

    I'm getting compressor 4.1 video rendering error 3 while trying to process a file to output to 1080p
    Any help would be appreciated.

    Hi Russ,
    Thanks for your reply.
    I was using FCPx 10.1 and clicked on "Send to Compressor" to encode the video at 1080p before uploading to
    YouTube but each time I tried it processed for about 5 minutes (transcoding) and then failed (with Error 3)
    I fixed the problem by exporting the video from FCPX to a .MOV file and subsequently using that file as input to Compressor and outputing a 1080p file for upload to YouTube.
    Regards,
    Frank.

  • I'm getting Video rendering error: -50 and can't load my videos to youtube, or in a file.

    I can't share any video anywhere and am getting this error message:
    Video rendering error: -50
    Any help?
    I'm using iMovie.

    Have you tried to export Master File and use Compressor to encode. There are presets there ?

  • Video Rendering Error -50

    When ever I try to share my video off of iMovie it says "The share operation has failed, video rendering error -50" I have tried to search up on how to fix this and have found nothing. I am using the latest software update and have iMovie updated. Also I am using Quicktime player which is also up to date. But also even though it says it has failed it puts a 15 second version of my clip on my desktop (only the first 15 seconds of the video) I am not sure if it has to do with any of my settings but I can still not find to how to fix this.

    same problem, don't know how to solve it...

  • Imovie 10 wont let me share my videos over 3-4 minutes , youtube is ok but when i try a video of about 90  minutes i hit share and after about 10 mins i get the message box "video rendering error: -50 share failed please help!

    I uploaded the new Imovie 10 and cannot share videos,after about 10 mins I get the message "Share failed Video rendering error :-50", please help!

    I am getting the same problem. Downloaded Maverick and the new iMovie 10.0.1 and It will only upload 10 minutes of a 65 minute video then I get the rendering error 50 each time tried to export to desktop, to thumbdrive, to youtube. No luck.  any suggestions Apple?

  • Can't share iMovie. Getting the following error: Video rendering error: -50

    Created a movie in iMovie and it won't let me share it (no matter how I try to share it). I'm getting the following error each time: Video rendering error: -50

    I select a book to read from my library it takes me to digital editions and this message comes up. Has been working for a couple of years but something has happened, maybe I did it but don't and to make it worse there is no one to contact to fix it. Get the following message. "Error getting license server communication problem MW_ADEPT_CORE_EXPIRED" I

  • Video rendering error -50 iMovie version 10.0.6

    Every time I try to share my project, it says "Video Rendering failed" or something and when I click on details it says "Video Rendering Error : -50". I have the newest version of iMovie version 10.0.6 and i need to know how to fix this. Thank you!

    I'm having same problem. I have upgraded to Yosemite since I edited. Last version or OS never had this problem.

  • HT5622 I have created a trailer using iMovie, iMovie won't let me share, Video rendering error: 2

    I have created a trailer using iMovie, iMovie won't let me share, Video rendering error: 2
    The share operation "File" has failed.
    imovie 10.0.1

    afterwards it worked fine?
    or do i need also to change the titels in my project to english?
    thaks

Maybe you are looking for

  • Reg. CIN related excise capture for a SRM PO and goods receipt in R/3.

    Hello Gurus, We are on SRM 4.0 and have extended classic scenario. For Country India Roll out, we want to capture excise manually in R/3 once an SRM Goods confirmation from an SRM PO is posted to R/3 system as a goods receipt. We also tried manually

  • API get_blob_file_src not displaying images correctly

    i am trying to display a blob on a form procedurally using get_blob_file_src. However i get a broken image when i ran the page. I read about this on this forum and have changed the page authentication to public but i dont get the page displayed. Code

  • Red Hat 5

    Is Aqualogic User Interaction and it's associated components (Search, Publisher, Collaboration, etc.) compatible with Red Hat 5 and Oracle 10.2.0.3? Thanks

  • ITunes 7 Privilege Problems with Non-Administrator Account

    Hello, I've installed iTunes 7 on WinXP using my account, which is in the Administrators group. However, when I attempt to launch it under another account (which is in the Power Users group, but is not an administrator), a window is displayed with th

  • Dual monitor using imac

    Can I use my intel Imac as a dual monitor for my MBP?