What is webget request failed

I am trying to download PDF pack and get this message. "WebGet request failed. Has anyone seen this message before?

Hi Mark Lopez,
I am not very sure about this issue but This might be caused due to Any antivirus installed on your system, Please disable them and try downloading the product again from a different Browser.
Please refer to these threads as they seem relevant to your issue:-
Downloading Acrobat Pro and I get "WebGet request failed." Suggestions?
Re: WebGet Request Failed
Please let me know if this helps with your issue.
Regards,
Rahul Tyagi

Similar Messages

I get an error message "WebGet request failed" when I try to download Adobe Acrobat every time

I have tried to download Acrobat Pro 6 times, and continue to get an error message, "WebGet Request Failed". I need to get this downloaded. Is there a way to make it work??

Download onto what system using what means? This is an hopelessly outdated version that is/ may simply not be compatible with modern operating systems...
Mylenium

Adobe Standard Installation error "WebGet request failed"

While trying to install Adobe Standard on a Win7 PC through Chrome, I keep getting the error message "WebGet request failed". What do I do to correct this?

Clement86 for information on how to download your purchased software please see Find a download link on Adobe.com. If you continue to face difficulties with the Chrome web browser then please utilize a different web browser.

WebGet Request Failed - Adobe Acrobat

Every time i try to install Adobe Acrobat Pro it fails and prompt me with "WebGet Request Failed" and then it stops. It happens in the beginng of the download.
I tried to search on Google, and i found one site that said i needed to uninstall McAfee or Norton 360 antivirus, but im currently not useing any of these programs.
Do you got any ideas how to fix this?

Hi sdfsfyry,
Are you downloading from cloud.acrobat.com? What happens when you download directly from this page: Download Acrobat products | Standard, Pro | XI, X?
Make sure that you're logged in as an administrator, and disable any antivirus software (the issue may be related to antivirus software other than the two you mention).
Please let us know how it goes.
Best,
Sara

Acrobat XI Pro WebGet Request Fail during download

I am trying to download a subscription to Acrobat XI Pro and I repeatedly receive a "WebGet Request Failed" error message after 29% of the download. I do not understand what this means or how to fix the problem. I am currently on a Macbook Pro, using Mavericks and have tired with Safari and Firefox. Any help is greatly appreciated.quest

Hi BTB8541,
Try Downloading from this Direct Link (Download Acrobat products | Standard, Pro | XI, X ) and let me know if this issue persists.
Regards,
Rahul

WebGet request failed

I am trying to download Adobe Acrobat XI Pro and I get the message WebGet Request failed. I have tried this on multiple browsers and I am using the 64 bit windows 7 OS.

Hi amj151,
Please try downloading Acrobat XI pro from below link. I hope it would help.
http://prodesigntools.com/
Regards,
Ashish

I bought adobe pro and it downloads to 3% and then stops...says WebGet request failed. I need this POS to work right now...

Is anyone there who can answer my question before I stop payment on my subscription?

http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
This link should do for the download.

Transport request failed; recollected with new TR;what happens to first one

Hi,
I released a transport request and requested that the request be transported to the testing environment.
I received a message from Basis that the transport failed. I suspected that it might fail because I say many duplications in se09.
To fix this problem, I basically recollected the objects carefully and under a new transport request number; and released it.
I have requested that the Basis team move the new request to the testing environment.
1. What is wrong with what I did?
2. If the second request successfully gets moved to the testing environment, what becomes of the first request which was released, therefore no more available in development for me to delete? I tried to delete it under the "Released" section in se09 but got a message that it is not available to delete.
3. Could I have used the same Transport Request number the second time around, although the first number had been previously released?
Thanks

1. What is wrong with what I did?
It depends, did you check the Log.
Log should tell you why it failed or atleast give you some hints.
Ex : Missing objects ..might have been locked in an other request.
2. If the second request successfully gets moved to the testing environment, what becomes of the first request which was released, therefore no more available in development for me to delete? I tried to delete it under the "Released" section in se09 but got a message that it is not available to delete.
If the second request contains similar objects to the ones in first, everything will get overwritten in the target system.
TR1 - 10 Objects
If TR1 returns RC=8 due to one object, 9 objects will be successfully transported. You may only transport the failed one in the next request with its corrections.
3. Could I have used the same Transport Request number the second time around, although the first number had been previously released?
Yes, same released request can still be imported more than once but it may result in the same.
Try to find the reason the request failed, accordingly add objects in the next corrected request.
You can also copy requests into an other.
RClick on the request - Include Objects ( Ctrl + F11 ) - Enter Request Name.

SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600 - The request failed with HTTP status 503: Service Unavailable

Hi all,
knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
Situation:
Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
Second child domain also contains a SCCM SP1 server (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
Error:
SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
wsusutil checkhealth =>OK
downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
wsus admin console able to connect and configuration possible => OK
IIS ports configured within SMS are equal to those configured for WSUS website
SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
wcm.log does report an error: (SCCM Log files at the end.)
"The request failed with HTTP status 503: Service Unavailable"
IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
Questions:
What else should I look at? (registyr, SUSDB content,..)
What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
And finally - Who does know the solution ?
wcm.log:
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~ at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~ at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Local WSUS Server Proxy settings are correctly configured as Proxy Name and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
wsyncmgr.log (as a result of being not able to configure upstream server I guess):
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)

I just experienced the exact same scenario. After much digging I found that csakg6so posted a fix at
Windoows-Noob
Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
Go to internet options
Go to conections
Go to LAN settings
Uncheck all boxes
The original post said to reboot, but that wasn't necessary for me.
After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.

ORA-29273: HTTP request failed ORA-12535: TNS:operation timed out

SQL*Plus: Release 11.2.0.3.0
Solaris 10 SPARC
Hi,
I get the following error when trying to make an HTTP request. Below is the snippet of code I run. I get the error after exactly 60 seconds(default timeout?). I searched through the forums and found many similar errors but nothing that helped me resolve this issue. The problem does not exist in the rest of our environments, only our test environment.
Help is greatly appreciated. Thanks.
DECLARE
   p_mid_tier    VARCHAR2 (500);
   responsestr   VARCHAR2 (500);
BEGIN
   SELECT *****
     INTO p_mid_tier
     FROM *****
    WHERE profile_type = '*****';
   UTL_HTTP.set_wallet ('file://$ORACLE_HOME/network/admin/wallets');
   UTL_HTTP.set_transfer_timeout (6000);
   UTL_HTTP.set_response_error_check (TRUE);
   responsestr :=
      UTL_HTTP.request (
         UTL_URL.ESCAPE (p_mid_tier || '*****'));
   DBMS_OUTPUT.put_line (responsestr);
END;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1722
ORA-12535: TNS:operation timed out
ORA-06512: at line 15

1001371 wrote:
SQL*Plus: Release 11.2.0.3.0
Solaris 10 SPARC
Hi,
I get the following error when trying to make an HTTP request. Below is the snippet of code I run. I get the error after exactly 60 seconds(default timeout?). I searched through the forums and found many similar errors but nothing that helped me resolve this issue. The problem does not exist in the rest of our environments, only our test environment.
Help is greatly appreciated. Thanks.
DECLARE
   p_mid_tier    VARCHAR2 (500);
   responsestr   VARCHAR2 (500);
BEGIN
   SELECT *****
     INTO p_mid_tier
     FROM *****
    WHERE profile_type = '*****';
   UTL_HTTP.set_wallet ('file://$ORACLE_HOME/network/admin/wallets');
   UTL_HTTP.set_transfer_timeout (6000);
   UTL_HTTP.set_response_error_check (TRUE);
   responsestr :=
      UTL_HTTP.request (
         UTL_URL.ESCAPE (p_mid_tier || '*****'));
   DBMS_OUTPUT.put_line (responsestr);
END;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1722
ORA-12535: TNS:operation timed out
ORA-06512: at line 15
the most frequent cause for TIMEOUT is a FireWall on or between client & server.
when was last time this worked without error?
what changed since then?

Proc Chain - Delete Overlapping Requests fails with aggregates

BW Forum,
Our weekly/daily load process chain loads several full (not delta) transaction infopackages. Those infopackages are intended to replace prior full loads and are then rolled up into aggregates on the cubes.
The problem is the process chains fail to delete the overlapping requests. I manually have to remove the aggregates, remove the infopackages, then rebuild the aggregates. It seems that the delete overlapping request fails due to the aggregates or a missing index on the aggregates, but I'm not certain. The lengthy job log contains many references to the aggregate prior to it failing with the below messages.
11/06/2004 13:47:53 SQL-END: 11/06/2004 13:47:53 00:00:00                                                 DBMAN        99
11/06/2004 13:47:53     SQL-ERROR: 1,418 ORA-01418: specified index does not exist                        DBMAN        99
11/06/2004 13:47:59 ABAP/4 processor: RAISE_EXCEPTION                                                       00        671
11/06/2004 13:47:59 Job cancelled                                                                           00        518
The raise_exception is a short dump with Exception condition "OBJECT_NOT_FOUND" raised.
The termination occurred in the ABAP program "SAPLRRBA " in
"RRBA_NUMBER_GET_BW".
The main program was "RSPROCESS ".
I've looked for OSS notes. I've tried to find a process to delete aggregates prior to loading/deletion of overlapping requests. In the end, I've had to manually intervene each time we execute the process chain, so I've got to resolve the issue.
Do others have this problem? Are the aggregates supposed to be deleted prior to loading full packages which will require deletion of overlapping requests? I presume not since there doesn't seem to be a process for this. Am I missing something?
We're using BW 3.3 SP 15 on Oracle 9.2.0.3.
Thanks for your time and consideration!
Doug Maltby

Are the aggregates compressed after the rollup? If you compress the aggregate completely, the Request you are trying to delete is no longer identifiable once it is in the compressed E fact table (since it throws away the Request ID).
So you need to change the aggregate so that it the most recent Requests remain in the uncompressed the F fact table. Then the Request deletion should work.
I thought what was supposed to happen if the aggregate was fully compressed and then you wanted to delete a Request, the system would recognize that the Request was unavailable due to compression and that it would automatically refill the aggregate - but I'm not sure where I read that. Maybe it was a Note, maybe that doesn't happen in a Process Chain, just not sure.
The better solution when you regularly backout a Request is just not the fully compress the aggregate, letting it follow the compression of the base cube, which I'm assuming you have set to compress Requests older than XX days.

Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

Hi,
I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
with HTTP status 404: Not Found."
================================================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/27/2015 5:56:10 PM
Event time (UTC): 1/27/2015 5:56:10 PM
Event ID: f7aedd39118845b79c17d3442a0d15a7
Event sequence: 54
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: <Machine Name>
Process information:
Process ID: 4712
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: TargetInvocationException
Exception message: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The request failed with HTTP status 404: Not Found.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
575
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
553
at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
46
Request information:
Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx
Request path: /ESB.Portal/uddi/uddi.aspx
User host address: ::1
User: <domain>\<user>
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 19
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
=================================
Any idea why this is happening and what needs to be done ?
PLEASE HELP
Thanks & Regards
Vikram

Snippet from the link below:
If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
“%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
Refer:
https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
Sarvanan's blog around this with detailed explanation:
Configuring Exception Management Portal
As mentioned above also
Check Portal Configuration Settings
Rachit
Please mark as answer or vote as helpful if my reply does

Getting Exception - ErrorCode ERRCA0017 :SubStatus ES0007 :There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)

I have used Azure managed Cache (Basic tier) in my Web App deployed on cloud service.
Now I am getting exception. ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state) on Production environment.
I know, this exception is occurred when memory usage reached more than 95%.
I want to handle this issue in code so please provide the right solution.
My Clients are facing it... so please help me .
Its very urgent.
Server Error in '/' Application.
ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There
is a temporary failure. Please retry later. (The request failed because the server is in throttled state)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace
below.
Stack Trace:
[DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0007>:There is a temporary failure. Please retry later. (The request failed because the server is in throttled state)]
   Microsoft.ApplicationServer.Caching.DataCache.ThrowException(ErrStatus errStatus, Guid trackingId, Exception responseException, Byte[][] payload, EndpointID destination) +551
   Microsoft.ApplicationServer.Caching.SocketClientProtocol.ExecuteApi(IVelocityRequestPacket request, IMonitoringListener listener) +287
   Microsoft.ApplicationServer.Caching.SocketClientProtocol.Upsert(VelocityPacketType type, String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[]
tags, String region, IMonitoringListener listener) +357
   Microsoft.ApplicationServer.Caching.SocketClientProtocol.Put(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +74
   Microsoft.ApplicationServer.Caching.DataCache.InternalPut(String key, Object value, DataCacheItemVersion oldVersion, TimeSpan timeout, DataCacheTag[] tags, String region, IMonitoringListener
listener) +288
   Microsoft.ApplicationServer.Caching.<>c__DisplayClass2f.<Put>b__2e() +146
   Microsoft.ApplicationServer.Caching.DataCache.Put(String key, Object value, TimeSpan timeout) +263
   Microsoft.Web.DistributedCache.<>c__DisplayClass31`1.<PerformCacheOperation>b__30() +19
   Microsoft.Web.DistributedCache.DataCacheRetryWrapper.PerformCacheOperation(Action action) +208
   Microsoft.Web.DistributedCache.DataCacheForwarderBase.PerformCacheOperation(Func`1 func) +134
   Microsoft.Web.DistributedCache.DataCacheForwarderBase.Put(String key, Object value, TimeSpan timeout) +148
   Microsoft.Web.DistributedCache.BlobBasedSessionStoreProvider.SetAndReleaseItemExclusive(HttpContextBase context, String id, SessionStateStoreData item, Object lockId, Boolean newItem)
+177
   System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +1021
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34009
Thanks
hema

You should add retry logic in case of retriable exceptions. If the retries fail as well you should reset the DataCacheFactory as suggested in this link.
http://blogs.msdn.com/b/cie/archive/2014/04/29/cache-retry-fails-what-next.aspx
Thanks,
Pallav

Error from Cisco Agent Desktop - The agent- or workflow-initiated action request failed.

We have roughly 20 agents using Cisco Agent Desktop version 85.1.417 and I have one that when she clicks the phone button to answer a call she gets the error: "The agent- or workflow-initiated action request failed."
I reinstalled the program, but she still receives the same error. What could be causing this problem?

This is what I found in the log:
2014-10-06 08:59:46:838 INFO VOIP2021 Desktop monitoring enabled for extension [9214].
2014-10-06 09:00:12:147 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
2014-10-06 09:00:12:159 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
2014-10-06 09:01:01:580 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781617 != 37533406)
2014-10-06 09:09:28:543 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781655 != 37533406)
2014-10-06 09:13:42:458 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781669 != 37533406)
2014-10-06 09:29:03:809 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781740 != 37533406)
I'm attaching part of the DBG log. I hope that it helps.
Thanks

SOAP request failed with return message 2147483653

Hello everybody!
I've got a constant error while trying to execute following MDX-statement via BI Java SDK:
SELECT {[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 0 , {[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]} DIMENSION PROPERTIES MEMBER_UNIQUE_NAME, MEMBER_CAPTION, PARENT_UNIQUE_NAME on 1 FROM [$ZBCS_OV12]WHERE{[0BCS_REPMOD].[N],[0BCS_REPMOD].[P],[0BCS_REPMOD].[R],[0BCS_REPMOD].[S]}{[0PCOMPANY].[000001],[0PCOMPANY].[000002],[0PCOMPANY].[000102],[0PCOMPANY].[000103],[0PCOMPANY].[000104],[0PCOMPANY].[000200],[0PCOMPANY].[000003],[0PCOMPANY].[000004],[0PCOMPANY].[000100],[0PCOMPANY].[000101],[0PCOMPANY].[000105]}*
The error is:
SOAP request failed with return message 2147483653 (Log not found (in main memory))
What to do with this message? How to understand what is the cause of the error?
The same query is working fine in MDX-test tool.
WBR, Dmitriy.

Solved myself, it's because the query used in my code have user input variable.

What is webget request failed

Similar Messages

Maybe you are looking for