What is What is different between CP-7920-BUN-ST-K9 and CP-7920-CH1-K9 ?

I had CCME 3.1 and 100 User Licenses ,
Do I must buy CP-7920-CH1-K9 , not CP-7920-BUN-ST-K9 ?
Any one can help me !
Thanks !
chenmu

The CP-7920-CH1-K9 includes the CM license, where CP-7920-BUN-ST-K9 doesn't.
CP-7920-BUN-ST-K9 Cisco 7920 Phone ASSY, Standard Phone Package USD 595.00
CP-7920-CH1-K9 Cisco 7920 Phone ASSY w/User License USD 745.00
( 1 ) SW-CCM-UL-7920 USD 150.00
CallManager Unit License for Single Wireless IP Phone 7920
( 1 ) SW-CCME-UL-7920 USD 150.00
Cisco CallManager Express License For Single 7920 IP Phone

Similar Messages

  • What is different between NW Developer Studio 7.00 and 2.0?

    I was download NWDS 7.00 in service market place. but I found NWDS 2.0 in same place.
    what is different? and what does download in service market place?
    I will do java develpment for SAP XI.

    Hi Joeng,
    for SAP NetWeaver 7.00 Web Dynpro development you need the NWDS 7.00, for the older Version 6.40 you need the NWDS 2.0.

  • What are the functionality different between FlowN Activity and While Act

    Good Morning,
    Kindly share Information Regards, Functionality of FlowN and While Activities. Where we can these two activities.
    Kindly give to me Just two points of Functionality differences about these activities.
    Thanks,
    AnilReddy

    Hi AnilReddy,
    FlowN activity is replaced by the forEach activity in BPEL 2.0 projects, forEach executes its contained scope N times, while executes its contained scope repeatedly until a condition is no longer true.
    Cheers,
    Vlad
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    https://forums.oracle.com/forums/ann.jspa?annID=893

  • What are the major differences between 4.6 C, 4.7 and ECC6 Versions

    Hi,
    Please can any boyd explain me the major differences between 4.6C, 4.7 and ECC6 Versions...
    Regards
    sankar

    Hi,
    go to this website
    http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
    enter your
    Source release , target release and the module to know more.
    Thanks
    Ashok

  • Different between coding of simple ALV report and interactive ALV report

    Hi
    Please some one tell me the difference (extra coding) for interactive ALV report.
    I know how to design simple ALV report but i dont know what extra I hace to code for interactive ALV report.
    Thanks in advance.

    View at se38, ALV grid demos,  search BCALGRID

  • Is there any different between the US unlocked Iphone 4S and the Australia unlocked Iphone 4S?

    I read that the unlocked iPhone works only on supported GSM networks, such as AT&T in the U.S. When you travel internationally, you can also use a micro-SIM card from a local GSM carrier. Did it mean that the Australia Iphone uses the micro-SIM card or work differently? I did not any information about that.

    Well if you purchase it you can call internationally with roaming chatges if you purchase it from Australia i assume it will be unlocked anyways.

  • What is the different between Logical complex join and Physical join?

    hi,
    Do somebody know what is the function different between logical complex join in BMM layer and physical join in physical layer?
    Thanks.

    Thank you very much1
    I understand their differentiation:
    In the BMM Complex join (intelligent), means OBI picks the best way from possibly many different ways to join using physical join. FK join forces the same join always, which limits flexibility.

  • What is the main difference between these two api

    Hi
    I am using portal 3.0.9.8.1 under NT environment.
    I am planning to change the user's password programmatically.
    Could someone advise me about the difference between these two
    api:
    wwsso_api_user_admin.change_password and
    wwsso_api_user_mgr.change_password
    Are these api the same?Are they affecting the same table?
    Thanks in advance for any clarification
    Regards

    Michelle1892773 wrote:
    What is the main difference between LOCAL VARIABLE, REFERENCE, PROPERTY NODE and INVOC. NODE?
    Can u show this with an example in a VI using all these?
    Basic overview. Someone can go into more depth if they want.
    Local Variable - Correlates to some location in memory that holds information. Based on the data type, it looks at that location and interprets the 1's and 0's as either a double, integer, string, structure(cluster), etc.
    Reference - ill leave the details of this to someone else I can't give a decent explanation.
    Property node- sets different "properties" of a control/indicator etc. One of the properties is value so that works similar to a local variable. However, you can set much more than that. For example, with controls you can set the property of visible, not visible, color, etc etc.
    Invoke node - invokes some "method." i.e. calls some function to act on something
    These may not be the best explanations, or even 100% correct. But it should get you started. I'm sure someone else will build on this.
    CLA, LabVIEW Versions 2010-2013

  • Architecture difference between Hyperion 7.x, 9.x and 11.x

    Hi Guys,
    Can any one tell me what is the architecture difference between Hyperion 7.x, 9.x and 11.x
    Regards
    Avinash BI

    Here are the links I have:
    11.1.2.1
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-component-architecture-11121-354678.ppt
    11.1.1.3
    http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-fd-11113-128366.ppt

  • What is the different between Sharepoint fast search service and Sql server fulltext search?

    HI ,
    I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
    Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
    Thank you.
    James

    They are very, very different beasts.
    Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
    SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
    outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
    and tables.
    Can you run SharePoint purely for Search? Yes, definitely.

  • What is the different between payment methods Wire and EFT

    Hi All
    can anybody tell me What is the different between payment methods Wire and EFT ?
    Regards ;

    WIRE:
    Wire is transfer of amount due directly to the supplier's bank it is an electronic transfer of funds
    This mode of payment is used for international suppliers.
    It can be paid in foreign currency or USD.
    Wire payments are same day payments.
    EFT:
    EFT ensures funds transfer from one bank account to another using electronic links.
    Can be used to make payments into domestic banks (within US) in USD only.
    It is faster than check payments.
    Hope this helps.

  • What is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

    what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

    what is the difference between the sports edition apple watch and the normal edition, is it the bands different or do the they have different apps. Also could you take the bands off and put new ones on(change the bands)?

  • What is the different between statement and preparedstatement?

    hi,
    recently i have attended a telephonic interview. they asked me what is the different between statement and preparedstatement? and when u will use them? Hi! can any one say me the original difference??

    sorry dear,
    i am already shortlisted. and monday is my HR round.
    . Every 1 is not like u.
    So you have read the examples and explanations that you found when you googled, and you have read the javadoc and you still don't understand? And you are shortlisted? For what? I hope you won't do server programming.
    I will give you a few hints.
    Escaping of data
    Storing of dates
    Safer
    Faster

  • What is the different between component and component type in extract struc

    Hi All,
    What is the different between component and component type in the Extract Structure?
    I used them, but I never really know the different between them yet.
    Thanks,
    Grace

    The difference between Component and Component Type are:
    Component This is essentially the field name in the extraction structure. These can either be SAP delivered field names or custom field names (e.g. Y* or Z*).
    Component Type This defines the data definition for the field, along with associated attrributes and descriptions for anything using that Component Type, to define the corresponding Component. If you double-click on any Component Type in an extraction structure, it will show you the definitions that have been setup for that Component Type (will display as Data Element but it's essentially synonymous - Component Type refers to structures and Data Elements refer to tables).

  • What's different between busniess system and technical system in SLD?

    I can enter product(ect.ERP r/3) , components(ect.FI-CO module) to technical system , then enter technical system to busniess system  but ,who can explain  what's different between busniess system and technical system in SLD, exactly?
    THANKS!

    Technical Systems are of following types:
    Technical systems are application systems that are installed in your system landscape. An example of an application system is a Customer Relationship Management (CRM) server. In the SLD, there are five types of technical systems:
    1.)WEBas java,
    2.)Standalone JAVA
    3.)Third party
    4.)Web as ABAP
    1) Web AS Java
    Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
    2.)Standalone Java
    Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon
    Web AS java belongs to the NetWeaver Comes with both ABAP and Java, Standalone instread comes separate from the netWeaver.
    3) Third party technical sytem
    It can be any of the technical sytem. let us say if you want to send a file to R/3, here the file reside in your local system. for that you can define your local system as a third party technical system.
    All those machines that comes under non sap, belongs to the third party.
    4.) Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
    Also refer : http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
    Business systems are logical systems, which function as senders or receivers within XI. Business systems can be SAP systems or third-party systems.
    Depending on the associated technical system, the following types of business systems are defined in the SLD:
    · Web AS ABAP
    A business system, which is associated with a Web AS ABAP.
    A business system, which is associated with a Web AS ABAP, can play the role either of an application system or an integration server. An integration server is the central component of XI, which provides a framework for the exchange of information among various internal and external entities of a company. The integration server facilitates the interaction between the different operating systems and applications across internal and external networks.
    · Web AS Java
    A business system, which is associated with a Web AS Java.
    · Standalone
    A business system, which is associated with a standalone Java application.
    · Third-party
    A business system, which is associated with a third-party technical system.
    http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Maybe you are looking for

  • TDS calulcation on partial amount

    Hello, Through MIRO, one accounting document has been generated like: Expenses      Dr.  10000 Brokerage      Dr.   1000 Vendor          Cr.  11000 Again at the time of vendor payment discharge, I need to deduct TDS on Brokerage automatically (not ma

  • Problem using earphones with iPhone 4S

    I cannot play music on my iPhone 4S through earphones - I only get static even though the iPhone speaker works fine. The same earphones work fine with my iPod and other stereo inputs and I've tried multiple earphones with the same result. This just s

  • PLSQL Procedure to invoke WebService

    Hi, We have a requirement to invoke a webservice(ESB\BPEL) using PLSQL Procedure. we are trying to invoke service by getting details of service from a table like WSDL path, SOA Envelope and operation type. If anybody has worked on the same requiremen

  • Need clarity on ARP operation

    Hi, I just wanna know whether i'm properly understandin ARP or not. As per the OSI model if we take the communication between any two devices, the sender host will go through the Application,Presentation,Session,Transport,Network,Datalink,Physical an

  • HT202297 How to sort reminders in OSX Moutain Lion?

    on the iCloud calendar, I can sort reminders by date, description, importance, etc. How can I do that on my desktop in OSX Mountain Lion's Reminders?