What is WOLFGANG RIB software to use with SAP PS

Dear All
In my Project an integration with of WOLF GANG RIB software is going to be done for which analysis is going on .
I want to know about the functionality of it . and how can we use this for project system .
Regards
Rama Shanker Sharma

Hi...
Im adding to Virendra reply.
It may help u.
http://www.saphila.co.za/Presentations/6.Tuesday/Stream5_SME/Van_Tang_and_flatscher%201%20nov.pdf
Page...23.
Regards
Chandra

Similar Messages

What is the best font management software to use with CS6?

I currently use Extensis Fusion 3 but it cannot auto-activate my fonts in CS6. It looks like Fusion 5 is also limited. Is there a better font management software to use with CS6?

Get rid of Norton a/k/a Symantec. It is one of the worst pieces of trash you can install on a Mac.
You do not need any additional anti-virus software than is already designed into OS X to protect your Mac against malware. I assume you paid enough for your iMac and that's part of what you paid.
If you use Windows, or are concerned about harboring viruses that target Windows, or care about friends who use Windows, then get ClamXav. It's in the App Store and it is free.
Since friends don't let friends use Windows, I have no use for it.

What is the best anti virus software to use with OS X 10.8?

What is the best anti virus software to use with OS X 10.8? Norton is slowing my iMac down and I'm constantly being bombarded by blocking messages for programs I don't recognize.
Thanks

Get rid of Norton a/k/a Symantec. It is one of the worst pieces of trash you can install on a Mac.
You do not need any additional anti-virus software than is already designed into OS X to protect your Mac against malware. I assume you paid enough for your iMac and that's part of what you paid.
If you use Windows, or are concerned about harboring viruses that target Windows, or care about friends who use Windows, then get ClamXav. It's in the App Store and it is free.
Since friends don't let friends use Windows, I have no use for it.

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

What is the best voice recognition software to use with my macbook pro

What is the best voice recognition software to use with my macbook pro?

This a popular one that I have read good things about>
http://www.amazon.com/s/?ie=UTF8&keywords=dragon+mac&tag=googhydr-20&index=softw are&hvadid=34356472549&hvpos=1t2&hvexid=&hvnetw=g&hvrand=18148534541911339040&hv pone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_95u976ozly_b
Hope this helps

What XA JDBC driver should I use with Oracle 8i 8.1.6

I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using the driver in
a ConnectionPool in a TxDataSource for use by some entity beans using EJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 Server VM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver for Oracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any other drivers
that I can use for Oracle 8.1.6? Which driver and which version should I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle 8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Which drivers
are faster, and which support more features? I assume that I should not use the
type 4 driver since I am not using an applet, but I don't know if there are bugs
in the OCI C library for Solaris or in the JDBC drivers that use it that prevent
XA from woking. Which version of the Oracle C OCI library should I use if I use
a type 2 driver?
Thanks,
Ross Goldberg

Hi,
I think you can't use the 8.1.6 thin driver for XA, you would have to
use the OCI driver or 2PC-enable your datasource. AFAIK this has been
changed for 8.1.7
Check http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html.
Daniel
-----Original Message-----
From: Gene Chuang [mailto:[email protected]]
Posted At: Thursday, August 30, 2001 2:04 AM
Posted To: jdbc
Conversation: What XA JDBC driver should I use with Oracle 8i 8.1.6
Subject: Re: What XA JDBC driver should I use with Oracle 8i 8.1.6
I've asked this question before. This is the reply from Joe
Weinstein:
For reliability and JDBC 2.0 compliance, I recommend the
Oracle thin driver.
If not that driver, you should verify that a type-2 driver
actually does
deliver better performance, but then I would not have a
strong preference
between their type-2 and ours. Theirs may be faster, and JDBC
2.0 compliant.
Both are succeptible to OCI bugs, some of which only they can
fix, but we
listen.
Gene
"Ross Goldberg" <[email protected]> wrote in message
news:[email protected]...
>
I need to use an XA JDBC driver for Oracle 8i 8.1.6. I am using thedriver in
a ConnectionPool in a TxDataSource for use by some entity beans usingEJB 2.0.
I'm running WebLogic Server 6.0 sp2, EJB 2.0, Java 2 SDK 1.3.1 ServerVM, Solaris
2.7, and Oracle 8i 8.1.6.
I know of three different Oracle XA drivers: WebLogic jDriver forOracle XA, Oracle
OCI type 2 driver XA, and Oracle Thin tyoe 2 XA. Are there any otherdrivers
that I can use for Oracle 8.1.6? Which driver and which versionshould I use?
For example, can I use the Oracle 8.1.7 JDBC drivers with the Oracle8.1.6 server,
or would the Oracle 9i drivers work with the Oracle 8i server? Whichdrivers
are faster, and which support more features? I assume that I shouldnot use the
type 4 driver since I am not using an applet, but I don't know ifthere are bugs
in the OCI C library for Solaris or in the JDBC drivers that use itthat prevent
XA from woking. Which version of the Oracle C OCI library should Iuse if I use
a type 2 driver?
Thanks,
Ross Goldberg

What word processing program should I use with my Mac, what word processing program should I use with my Mac, what word processing program should I use with my Mac

what word processing program should I use with my Mac?

steve359 wrote:
For free you can download NeoOffice
Not quite. Downloading the current version of NeoOffice is definitely not free (downloading the previous version is). The developers of NeoOffice (the most Mac-like of the StarOffice descendants) make a distinction between the application itself (which is free) and downloading it, for which they require what they are pleased to call a "donation" (since it's mandatory, I would call it a fee).
shldr2thewheel wrote:
I totally forget about TextEdit all the time..
Indeed. For basic WP tasks, TextEdit can be quite satisfactory.
embauerxz
I only need it for reports
Would that include the report on the state of the US economy -- you know, the one President Obama asked you to deliver to the White House no later than 7AM on January 4? The one in two columns, with numbered paragraphs, table of contents, footnotes, mathematical formulae, 40 figures, 60 charts, quotations in Arabic, Japanese, and classical Greek, and 15 pages of references in APA style?
Grant Bennet-Alder is right -- "the real answer depends on what work you expect to do with it, and with whom you expect to do this work". There are dozens of word processors for Mac, from the venerable Word to the no less venerable Tex-Edit+. It would pointless to start listing them all, when many of them might be either too little or too much for your needs.

What type of repeater should I use with my new Airport Extreme?

what type of repeater should I use with my new Airport Extreme? Thanks.

If you want to repeat both bands of your dual band AirPort Extreme, another AirPort Extreme would meet these requirements.
If you only need to extend one of the bands that the AriPort Extreme provides, then an Airport Express would do that nicely.

What kind of convertor can I use with my I mac in Israel?

What kind of convertor can I use with my I Mac in Israel?

What do you want to convert? More details about what you are trying to do would help.

What version of firefox can I use with windows me?

What version of Firefox can I use with windows me? Where can I get it?

Firefox 3.0 versions and later do not work on the Windows 98/ME platform
*http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on the Windows 98 and Windows ME platform.
* https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/

SAP GTS------- SAPPI with Seeburger BIC----- ATLAS using with SAP PI

Hi All,
I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
Regards,
Ramesh

>
Ramesh Gulipalli wrote:
> Hi All,
>
> I have scenario this SAP GTS----->SAPPI with Seeburger BIC--->ATLAS(German customs system)
>
> 1)Inbound flow: SAP GTS will send the customs declaration message to ATLAS(German customs system)
> 2)outbound flow: response messages from ATLAS(German customs system) approved the customs declaration message and send to SAP GTS
>
> How to achieve using with SAP PI with Seeburger modules. What are adapter is required for this scenario.
>
> Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send to Atlas systeam.
>
> For mapping Source is Idoc (CCECUS02) and Target is EDIFACT(CUSDEC_UN_D96B).
>
> Regards,
> Ramesh
> .
for converting an XML to EDI or vice versa you can use the seeburger adapter.
http://www.seeburger.com/xi-pi-adapters/

What is the best programme to use with iwatermark or similiar copyright software

I want to watermark my photos, I have been told iwatermark is real good but can someone tell me what is the best app to use in conjunction with copyrighting or watermarking sofware.
Thanks

It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

What photo printer are you all using with iPhoto '08?

What brand and model of printer are you all using or would recommend for use with iPhoto '08?
I've been reading reviews on HP, Epson, Canon... my head is starting to spin. Thoughts?

Core Dump wrote:
There has got to be a backup product out there to allow a system to be backed up to a NAS or Drive attached to a server that is as simple as CrashPlan or TimeMachine but that actually work and don't cost $50/month for a system.
Thoughts?
CrashPlanPROe, the enterprise version, is $60 per year per client, not $50 per month, so it may be worth looking into. It's what we run and it's been working very well for us, though you need a central server to run the software. That server can be Windows, Mac OS X, Linux or Solaris, any of which will work with any of the supported clients:
http://www.crashplan.com/enterprise/support/doku.php/requirements
We tried Retrospect and had to return it for the limitation I mentioned above.
Regards.
Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Communities. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

What's the best PDA to use with iSync/Powerbook

My old sony clie finally died and I need to get a new PDA. Can anyone give me advice on the simplest PDA that is known to work well with a Mac platform? I had been using documents to go in order to hotsync my palm-based PDA in the past, but things may have changed.
Powerbook G4 17 Mac OS X (10.3.9)
Powerbook G4 17 Mac OS X (10.3.9)

I have heard the same. Thanks to the link you referenced to me I know that I shouldn't need any further software to use a Palm device with iSync (unlike when I discovered that I needed Mark/Soft in order to sync my Clie). I am trying to decide between the basic Palm Z22 and the more advanced Palms. It would make a big difference if one could link directly from the iLife 06 suite to a Palm - it would make purchasing the fancy color screens on the more expensive Palms worth it to be able to carry around the family photo album.

Whats types of inputs can be used with DAQ 6527? (PNP or NPN)

I need to know what types of input device (PNP or NPN) can be used with a DAQ 6527.

Greetings,
The digital inputs of the 6527 require TTL signals. As long as your device, whether it be a pnp or npn transistor, outputs a TTL signal, it will be compatible.
Regards,
Justin Britten
Applications Engineer
National Instruments

What is WOLFGANG RIB software to use with SAP PS

Similar Messages

Maybe you are looking for