What is wpad:80

My iPad is coming up with a log-in for wpad:80, asking for username and password. 
What is it, and where has it come from? 

Hi;
There are many good blog,site also oracle documents avaliable at internet. Please check below
http://www.google.com.tr/#hl=tr&q=data+type%2Boracle&oq=data+type%2Boracle&aq=f&aqi=&aql=&gs_sm=e&gs_upl=78610l83657l0l23l20l1l8l2l0l234l1701l2.5.4&fp=c759c1635a43d17d&biw=1259&bih=793
You can check also:
http://www.orafaq.com/wiki/VARCHAR2
http://www.orafaq.com/faq/what_is_the_difference_between_varchar_varchar2_and_char_data_types
Regard
Helios

Similar Messages

  • WPAD:80....??? What's that about???

    My ipad was working fine this morning and then all of a sudden starts asking for a wpad:80 user name and password..... tried normal Apple ID and nothing clears it.
    Won't let me connect to the internet....
    Also when I try and access TV content via Videos comes up with
    The Operation couldn't be completed. (NSURLEErrorDomain error - 1013)
    Pls help!

    HI there Annette, I Movie. Its a little more intricate, but gives a lot more options. I usually always do my slideshows in there. As far as the I Photo slideshow. Once you have your album photos and after you click the slideshow icon at the bottom, go to the settings icon. Once you are in there, you have a lot more options. I just kept changing them till I have what I wanted. Then go to the music icon and you can import some songs. If you want more than one song, First make a play list in I Tunes, with the desired songs. when you open the music icon, than all you have to do is select the playlist, not the individual song. I happen to like the Ken Burns effect. So if you want to have that motion you will have to adjust each photo so nothing gets chopped off. I also do not scale photos to fill screen, as that always chops off something. Just keep doing it till you get what you like. okey doke. I always print directions as well, than I can look while I do. Good Luck
    PS. If you do not want Ken Burns, do not click it in the settings tab, leave it unchecked. If you do want it on some photos, there is another icon at the bottom near the settings, that you can add him to individual Pics.
    Message was edited by: Ileen Cuccaro

  • Web Proxy Auto Discovery (WPAD) fails in Creative Cloud

    The Creative Cloud desktop application has a problem with WPAD automatic proxy detection.  When the computer is configured to "automatically detect settings", the Creative Cloud application will not load the Apps list, giving the error "Download Error.  Unable to reach Adobe servers.  Please check your internet  connectivity, firewall settings, and then try again."  All other elements of the Creative Cloud application (logging in, accepting terms of use, the "Home", "Files", "Fonts" and "Behance" tabs have no issues using the automatically detected settings).  I can refresh a netstat on the command line and see that the Creative Cloud application tries to make direct calls to the EC2 servers when attempting to connect to the "Apps" list instead of using the proxy.
    If I manually configure a PAC file or manually configure the proxy on the computer, the Creative Cloud can connect successfully.  The failure only occurs with "automatic detect settings".  I have tested different WPAD server configurations, to include Apache on Unix, IIS7 on Windows, text/plain and application/x-ns-proxy-autoconfig MIME types, and CNAME vs A record for 'wpad'.  Creative Cloud continues to fail to operate correctly.
    The old version of Adobe Application Manager can successfully connect and download updates using "automatic detect settings".  It will update itself (and installed apps) successfully.  After it updates itself, it will connect and update itself a second time, this time replacing itself with the Creative Cloud application, which fails to connect.  This behaviour is new to the Adobe Application Manager once it becomes the Creative Cloud application.
    It seems from what "official" documentation I can find that this is currently "broken as designed" (see Adobe references at bottom of post).  Connecting directly from a client to the internet without a proxy is prohibited by our information security policy (the chat support agent tried to tell me 3 times that the "solution" was to disable the proxy and open ports 80 and 443 to the internet).  Manually configuring the proxy through a PAC file or manually setting proxy information causes other issues and performance problems (I strongly disagree with Adobe staff member Jeff Wright's assertion that automatically detecting the settings is "a common issue with most applications"--see reference at bottom of post).
    While I could technically open the firewall or manually configure the proxy to make the Creative Cloud function properly, these are unacceptable workarounds as already stated.  Considering that the previous iteration (Adobe Application Manager) functioned just fine with automatically detected settings, and that the rest of the Creative Cloud application functions properly with automatically detected settings, it seems that this should be a minor issue to correct with the application, to ensure that the application cataloging and downloading respects the same configuration as the rest of the client.  What is the official Adobe position on the current broken functionality of the Creative Cloud application, and what is the timeline in implementing a fix?
    Pertinent Adobe articles:
    Creative Cloud Help / Troubleshoot download and install issues (http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html):
    Corporate environments: Configure Hardware firewalls or proxies
    Many organizations use a hardware firewall and proxy server that can prevent software from accessing an FTP server. A hardware solution applies to all computers within the corporate network. Most home networks do not use hardware firewall or proxy technology. 
    1. Contact your company's IT department to obtain firewall or proxy information.
    2. Configure your browser with proxy or firewall information.
    3. Configure your corporate firewall to by-pass the servers. The following servers are accessed:
                 ccmdl.adobe.com:80
                 swupmf.adobe.com:80
                 swupdl.adobe.com:80
    Post from Adobe staff member Jeff A Wright (Reply 14: http://forums.adobe.com/message/5620841):
    Quote: "The automatic detection of settings or the automatic configuration script is not currently supported.  Although to be honest when I worked regular in an environment, which utilized a proxy server, this seemed to be a common issue with most applications.  The manual configuration was the most reliable method of utilizing a proxy server and allowing the applications to access the Internet."

    Thx! that worked! now I can download Apps.
    (using squid proxy)
    Thx a lot

  • What is a Proxy server and how is it disabled?

    I'm having problems, and from reading these discussions, I suspect I have to disable my proxy server.
    1) Before the most recent OS upgrade, I was able to access iTunes Store only from my home ISP (Wildblue satellite), or if away from home, only when plugged into an ethernet wire. When I'm away from home, I can never access iTunes Store from wireless Airport connection -- no matter what hot-spot I'm at.
    2) After the most recent OS upgrade, I have the same problems, except I can't even get on iTunes Store from home. iTunes program bombs as soon as I log into the store.
    The solution suggested is to disable my proxy server. (System Preferences -> Networks -> Advanced -> Proxies)
    But I have no "disable button" here. I have a choice of "Using a PAC file" or "Manual". If i change it to "Manual", it defaults back to "Using a PAC File". and it says "PAC File URL: http://wpad.wildblue.com/wpad.dat". I can change the URL but I wouldn't have a clue what to change it to.
    There is also a checkbox: "Use Passive FTP Mode (PASV)" and it is checked. Should I uncheck this?
    Do satellite connections, like my Wildblue ISP, require a proxy server?
    Any help meandering through this dark maze of computer mumbo-jumbo is greatly appreciated. I just want to download things from iTunes again.
    Francis

    By default there is no proxy server activated in your network preferences so you must have at some point needed one or otherwise you would not have set it up.
    The simple solution is to create a new network location for you to use when your out and about.
    system preferences-->network-->location-->edit locations...
    click the plus sign
    title it with a name of your choosing, click done.
    Then apply
    This new location should have a blank set of network preferences.

  • Old application proxy-aware but not able to use WPAD

    My organisation uses an old application which activates itself over the internet.  Unfortunately this only works if the proxy server is explicitly defined in Internet Settings, however a WPAD file is enforced by GPO.
    Delivering this via App-V 5.0 I was hoping to overcome this by overriding the proxy settings via [HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings] but all policy keys (including Internet Settings) are ignored by design.
    Does anyone have any suggestions as to how I may work around this restriction?

    Hi all,
    there is a registry Key available handling this behaviour.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\AppV\Subsystem\VirtualRegistry\PassThroughPaths
    Default contents of this Mulit_SZ:
    HKEY_CURRENT_USER\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger
    HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
    HKEY_LOCAL_MACHINE\SOFTWARE\Policies
    HKEY_CURRENT_USER\SOFTWARE\Policies
    Please be aware that this is a System wide configuration as well as there is no documentation out there helping / defining what the potential risk of changing it is.
    Kind Regards
    Jo

  • IPad with wpad.dat

    There seem to be many people with this problem, but no solutions - only workarounds.
    We are creating a Guest WLAN using Cisco WLC contollers and web authentication.  On the iPad, everything works except for the Proxy auto detect.  Yes I know there are manual work arounds, but what I want is for Web Proxy Auto Detection to work correctly.
    We are serving wpad via DNS and this works fine on PC's - but not iPhone and iPad.
    Any help would be greatly appreciated.  If anyone knows for certain the WPAD does not and will not work on iPhone and iPad - please let me know so I can stop searching.

    I have exactly the same problem, using TMG 2010 as a proxy server. iPads do not want to detect the proxy using wpad.dat.Tried using:
    http://wpad/wpad.dat? in option 252 in DHCP, this makes no difference.
    Tried upgrading to IOS 6.1, this made no difference either.

  • WPAD file using DHCP

    We would like to push out the proxy setting using DHCP and a wpad.dat file.
    I have created a wpad.dat file that is hosted on a web server in the main office. If I setup option 252 on the dhcp server and point it to the webserver
    http://test/wpad.dat the head office can connect to the internet using that file. If I setup my branch offices dhcp server to use that same file that is hosted at the main office it says page cannot be displayed. Everything
    is the wpad.dat file is correct to say if your in this ip range and trying to go to the internet sites use proxy server.
    On all branch office systems, if I open up IE and go to
    http://test/wpad.dat they are able to download the file. What would be causing the branch office to not be able to get on the internet using the wpad.dat file? THe IE automatic detect setting Is checked off in all IE browsers so that is not the issue.
    Also when using the wpad.dat file using dhcp from any system, does it copy the wpad.dat file to the local pc or does it send each request where the file is hosted and then that server pushes request to the proxy server?

    Hi,
    It almost sounds like the branch office clients are getting the file, but they are not allowed to use the proxy server in the file? If you configure the client manually to use the Proxy in the wpad file, does it work then?
    I am also guessing that you mean that the IE automatic detect setting is checked and not off. :)
    The WPAD settings is cached in ie as you can see in this article.
    http://support.microsoft.com/kb/271361/sv
    /Johan
    Microsoft Certified Trainer
    MCSE: Desktop, Server, Private Cloud, Messaging
    Blog: http://365lab.net

  • At a glance what is new in Safari 5

    This should give a little in sight:
    http://lifehacker.com/5557731/first-look-at-whats-new-in-safari-5

    I missed the 'Blue Bar', I'm glad it has returned

  • What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

    What happens on iCloud when multiple family members use the same Apple ID?  For example if we all choose to use iCloud for contacts, are they all merged together?  We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

    Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
    You can only unravel this by
    1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
    2. Sign out of System Preferences>iCloud
    3. Create a new Apple ID and open a new iCloud account with it for your own use.
    4. Import the vCard back into the iCloud contacts page.
    5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
    6. Go to the new iCloud account and delete his contacts individually.
    Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

  • Macbook4,1 10.6.8 and firmware update - what went wrong?

    Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
    I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
    Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
    I clicked OK and it installed.
    Upon reboot, it seemed to install okay.
    But then I left the Macbook and it went into Sleep.
    I didn't come back to it again until the next day.
    When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
    And this is where the problems started.
    After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
    And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
    It finishes booting, but seems to go into Sleep.
    I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
    And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
    I've tried changing RAM, but problems remain.
    So what's all this? Any ideas?
    The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
    It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
    Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
    I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
    Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

    Thanks for the reply.
    Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
    I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
    Which capacitor?
    No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
    1) it came thru Software Update
    2) there was no warning
    3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
    I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
    Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

  • Format C drive, what steps to take for retaining all data of iTunes?

    Hello
    I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
    Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
    What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
    Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
    Thanks in advance

    This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following.  I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library.  You now have a "split library" where:
    E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
    C:\Users\your user name\Music\iTunes contains the following folders and files:
    Album Artwork (folder)
    Previous iTunes Library (folder)
    iTunes Library Extras.itdb (file)
    iTunes Library Genius.itdb (file)
    iTunes Library.itl (file)
    iTunes Library.xml (file)
    I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
    Before you change anything else, exit iTunes.  Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder.  You should now have this:
    or something very similar.  Now restart iTunes while holding down the SHIFT key.  You will see this dialog:
    Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above.  Select the iTunes Library.itl file and click OK.  iTunes will load - check that everything you expect to see is there.
    You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them.  You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations).  As tt2 suggested in his response, before you go any further:
    Make a backup of your new portable library to another device.
    De-authorize your iTunes account.
    Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.).  Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
    Once you've reformatted the drive and reinstalled Windows, install iTunes.  As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

  • What are the mandatory fields while creation of material master in differen

    what are the mandatory fields while creation of material master in different views?

    Hi Gopi,
      This is purely depends on the function configuration, which would be done MM consultants.  Kindly check with them.
    thanks & regards
    Kishore Kumar Maram

  • Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

    Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
    One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
    I now am very confused, how will I open it? I do not have adobe bridge!  After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
    My question is, do you still need adobe bridge installed in order to use camera raw?
    If yes, how does it work? How am I suppose to open camera raw?
    If no, how am I going to open camera raw without bridge?
    And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
    I badly need help!

    WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
    The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
    WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
    Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
    With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
    If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

  • Black window bugs and lockups and crashes and WHAT'S WRONG?

    First, I thought the problem was that my employer still uses Windows XP, with layers of custom security on top. But it happens at home, on my vanilla XP netbook.
    So then I thought the problem was XP, which is, after all, obsolete. But now it is happening on my brand-new week-old laptop running 64 bit Windows 7 professional.
    These are the problems:
    (1) When recovering from sleep mode, or when I plug in a second screen, or even just from having the screen closed briefly, Firefox fails to redraw its window contents. I just get a black, empty window until I resize it or force a refresh. NO OTHER PROGRAM I USE HAS THIS PROBLEM.
    (2) Sometime Firefox fails to redraw no matter what I do. I just had a totally black window, and when I clicked on the close box, a msgbox popped up, totally black inside, with a title like, "Are you sure you want to close?" I couldn't even see the "yes" and "No" buttons, and clicking where they usually are didn't work. I finally got it to close by hitting the enter key.
    (3) Sometimes these problems are accompanied by a little vestigial micro-window, which has no contents, no close button, and no resize control. It's this nothing window with no title, but the title bar is long enough for maybe 20 characters. The most recent time this happened to me, the nothing window had a blinking text cursor inside, but typing had no effect. The only way to get rid of the micro-window is to close every single instance of Firefox, and then wait about 20 seconds. Then it disappears on its own. Sometimes it appears on its own without the black screen problem.
    (4) All my favicons disappeared when I updated Firefox on my XP work computer, and they refuse to come back, even when I revisit the websites.
    The computers involved are:
    Dell E4200 running Win XP Pro
    Acer One netbook running Win XP Home
    Vostro 3350 running Win 7 Pro
    All 3 computers are running Norton Security Suite (The E4200 is running an Enterprise custom load, the other two are running Comcast's free version)
    And all 3 computers have been connected to a Displaylink USB video adapter (for a 3rd screen) at some point or another, meaning that the driver is loaded on all the computers, but the above problems occur without any external monitor at all connected.
    Everything else is pretty vanilla.
    I'm getting these issues every other day or so, and it is really starting to annoy me and make me worried that Firefox is unstable, with makes me worried that any unsaved work or even my hard drive data might be at risk.

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason.  The recipient is not new.  This issue happens on reply or reply to all or froward; not a new email. What is happening?

    Cannot send email from my iPhone or iPad. The server rejects a recepient for no apparent reason.  The recipient is not new.  This issue happens on reply or reply to all or froward; not a new email to the same recepient. What is happening?

    I talked with a tech today and he said I cloud is having problems which should be resolved shortly.
    In the mean time I used the .me smtp server settings which allowed me to send mail.

Maybe you are looking for