What is wrong in this trigger
Hello All,
please tell me whats wrong in the following trigger,
what effectively i am trying here is I wanted to insert the old records
before update to a temporary table, if this is not the way, then what is the correct way.
SQL> desc ttt1;
Name Null? Type
C1 NUMBER
C2 NUMBER
C3 NUMBER
BMU_ID NUMBER
SQL> desc temp_changes;
Name Null? Type
BMU_ID NUMBER
C2 NUMBER
C3 NUMBER
SQL> ed
Wrote file afiedt.buf
1 create or replace trigger tri_ttt1
2 before update of c3, c2 on ttt1 REFERENCING OLD AS old_ttt1 NEW AS new_ttt1
3 begin
4 insert into temp_changes
5 SELECT BMU_ID,C2,C3
6 FROM ttt1
7 WHERE old_ttt1.c2<>new_ttt1.c2
8 AND old_ttt1.C3<>new_ttt1.C3;
9* end;
SQL> /
Warning: Trigger created with compilation errors.
SQL> sho err
Errors for TRIGGER TRI_TTT1:
LINE/COL ERROR
2/1 PL/SQL: SQL Statement ignored
6/18 PL/SQL: ORA-00904: "NEW_TTT1"."C3": invalid identifier
you forgot the colon (:) before new and old...
Similar Messages
-
What's wrong with this trigger?
hi! i am creating a trigger that calls a procedure, it showed the following message. what's wrong?
SQL> create or replace trigger phang.t2 after logon on portal30.schema
2 begin
3 call phang.dob;
4 end;
5 /
Warning: Trigger created with compilation errors.
SQL> show error;
Errors for TRIGGER PHANG.T2:
LINE/COL ERROR
2/6 PLS-00103: Encountered the symbol "PHANG" when expecting one of
the following:
:= . ( @ % ;
The symbol ":=" was substituted for "PHANG" to continue.
thx.my trigger itself doesn't contain any htp.p statements, it just calls the procedure which has the htp.p statements for generating the page.Which is the same problem as calling HTP within the trigger itself. I'm not saying you CAN'T call HTP from your trigger (directly or indirectly) - I'm saying you SHOULDN'T.
You should have a sequence of events like this, for a more reliable PL/SQL Gateway experience:
Pseudocode:
A procedure (referenced by URL via the gateway).
This procedure issues DML (which causes the trigger to execute)
The trigger writes some information to a package variable (or other static container).
The trigger completes.
The procedure then accesses the package variable, and then HTP's that information as desired.
The procedure completes.The difference in the above pseudocode and what you are trying to do is that the act of streaming to the buffer is completely within the procedure being referenced by the gateway. When you put the HTP calls in procedures (unknown) to the procedure that the gateway is executing, you will often get erratic and unpredictable effects.
I have gone around this concept before, but I have had years of experience working with the gateway - something you aren't going to get in this Forum. -
What is wrong with this trigger code?
Hi folks,
Just wondering whether I might be missing something here about Oracle 9i, that one of you might notice, either from the syntax perspective, or regarding a bug? The code below compiles in the database I have, but the trigger does not fire, and no data is being inserted into the tables. The trigger is owned by sys, and the insert statements are in dynamic sql because I don't want the trigger not to compile if ever the tables are deleted from the b1dev schema.
Incidentally, this same trigger works well on Oracle 10.2.1.0 and Oracle 11.1.0. Any feedback would be much appreciated.
CREATE OR REPLACE TRIGGER cc_LogOff_Trig
BEFORE LogOff ON DATABASE
DECLARE
LogOff_sid PLS_INTEGER;
LogOff_Time DATE := SYSDATE;
Table_1 VARCHAR2(30) := 'CC_SESSION_EVENT_HISTORY';
Table_2 VARCHAR2(30) := 'CC_SESSTAT_HISTORY';
Table_Count NUMBER;
v_sql1 VARCHAR2(4000);
v_sql2 VARCHAR2(4000);
BEGIN
SELECT sId
INTO LogOff_sId
FROM sys.v$MysTat
WHERE ROWNUM < 2;
SELECT COUNT(* )
INTO Table_Count
FROM dba_Objects
WHERE Object_Name = Table_1
AND Object_Type = 'TABLE';
IF Table_Count = 1 THEN
v_sql1 := 'INSERT INTO bdev.cc_session_event_history(sid, serial#, username, osuser, session_process_addr, os_client_process_id, logon_time, type, event, total_waits, total_timeouts, time_waited_csecs,
average_wait_csecs, max_wait_csecs, logoff_timestamp) SELECT se.sid, s.serial#, s.username, s.osuser, s.paddr, s.process, s.logon_time, s.type, se.event, se.total_waits, se.total_timeouts, se.time_waited, se.average_wait,
se.max_wait, '''
||LogOff_Time
||''' FROM sys.v$session_event se, sys.v$session s WHERE se.sid = s.sid AND s.username = '''
||LogIn_User
||''' AND s.sid = '
||LogOff_sId;
EXECUTE IMMEDIATE v_sql1;
END IF;
SELECT COUNT(* )
INTO Table_Count
FROM dba_Objects
WHERE Object_Name = Table_2
AND Object_Type = 'TABLE';
IF Table_Count = 1 THEN
v_sql2 := 'INSERT INTO bdev.cc_sesstat_history(username, osuser, sid, serial#, session_process_addr, os_client_process_id, logon_time, statistic#, name, VALUE, logoff_timestamp) SELECT s.username,
s.osuser, ss.sid, s.serial#, s.paddr, s.process, s.logon_time, ss.statistic#, sn.name, ss.VALUE, '''
||LogOff_Time
||''' FROM sys.v$sesstat ss, sys.v$statname sn, sys.v$session s
WHERE ss.statistic# = sn.statistic# AND ss.sid = s.sid AND sn.name IN(''CPU used when call started'', ''CPU used by this session'', ''recursive cpu usage'', ''parse time cpu'')
AND s.username = '''
||Login_User
||''' AND s.sid = '
||LogOff_sId;
EXECUTE IMMEDIATE v_sql2;
END IF;
COMMIT;
END;
desc cc_session_event_history;
Name Null Type
SID NUMBER
SERIAL# NUMBER
USERNAME VARCHAR2(30)
OSUSER VARCHAR2(30)
SESSION_PROCESS_ADDR RAW(0)
OS_CLIENT_PROCESS_ID VARCHAR2(24)
LOGON_TIME DATE
TYPE VARCHAR2(10)
EVENT VARCHAR2(64)
EVENT# NUMBER
TOTAL_WAITS NUMBER
TOTAL_TIMEOUTS NUMBER
TIME_WAITED_CSECS NUMBER
AVERAGE_WAIT_CSECS NUMBER
MAX_WAIT_CSECS NUMBER
TIME_WAITED_MICRO NUMBER
LOGOFF_TIMESTAMP DATE
17 rows selected
desc cc_sesstat_history;
Name Null Type
USERNAME VARCHAR2(30)
OSUSER VARCHAR2(30)
SID NUMBER
SERIAL# NUMBER
SESSION_PROCESS_ADDR RAW(0)
OS_CLIENT_PROCESS_ID VARCHAR2(24)
LOGON_TIME DATE
STATISTIC# NUMBER
NAME VARCHAR2(64)
VALUE NUMBER
LOGOFF_TIMESTAMP DATE
11 rows selectedI have taken out the 'commit' and have added the 'when others then null' exception clause, but I would imagine there is a better way to do it than this? I don't want to do an insert into another table either. With Oracle 11g, this gives me the compile time warning....
CREATE OR REPLACE TRIGGER cc_LogOff_Trig
BEFORE LogOff ON DATABASE
DECLARE
LogOff_sid PLS_INTEGER;
LogOff_Time DATE := SYSDATE;
Table_1 VARCHAR2(30) := 'CC_SESSION_EVENT_HISTORY';
Table_2 VARCHAR2(30) := 'CC_SESSTAT_HISTORY';
Table_Count NUMBER;
v_sql1 VARCHAR2(4000);
v_sql2 VARCHAR2(4000);
BEGIN
SELECT sId
INTO LogOff_sId
FROM sys.v$MysTat
WHERE ROWNUM < 2;
SELECT COUNT(* )
INTO Table_Count
FROM dba_Objects
WHERE Object_Name = Table_1
AND Object_Type = 'TABLE';
IF Table_Count = 1 THEN
v_sql1 := 'INSERT INTO bdev.cc_session_event_history(sid, serial#, username, osuser, session_process_addr, os_client_process_id, logon_time, type, event, total_waits, total_timeouts, time_waited_csecs,
average_wait_csecs, max_wait_csecs, logoff_timestamp) SELECT se.sid, s.serial#, s.username, s.osuser, s.paddr, s.process, s.logon_time, s.type, se.event, se.total_waits, se.total_timeouts, se.time_waited, se.average_wait,
se.max_wait, '''
||LogOff_Time
||''' FROM sys.v$session_event se, sys.v$session s WHERE se.sid = s.sid AND s.username = '''
||LogIn_User
||''' AND s.sid = '
||LogOff_sId;
EXECUTE IMMEDIATE v_sql1;
END IF;
SELECT COUNT(* )
INTO Table_Count
FROM dba_Objects
WHERE Object_Name = Table_2
AND Object_Type = 'TABLE';
IF Table_Count = 1 THEN
v_sql2 := 'INSERT INTO bdev.cc_sesstat_history(username, osuser, sid, serial#, session_process_addr, os_client_process_id, logon_time, statistic#, name, VALUE, logoff_timestamp) SELECT s.username,
s.osuser, ss.sid, s.serial#, s.paddr, s.process, s.logon_time, ss.statistic#, sn.name, ss.VALUE, '''
||LogOff_Time
||''' FROM sys.v$sesstat ss, sys.v$statname sn, sys.v$session s
WHERE ss.statistic# = sn.statistic# AND ss.sid = s.sid AND sn.name IN(''CPU used when call started'', ''CPU used by this session'', ''recursive cpu usage'', ''parse time cpu'')
AND s.username = '''
||Login_User
||''' AND s.sid = '
||LogOff_sId;
EXECUTE IMMEDIATE v_sql2;
END IF;
EXCEPTION
WHEN OTHERS THEN
NULL;
END;Edited by: efachim on Jan 6, 2009 11:30 AM -
What is wrong with this code? on(release) gotoAndPlay("2")'{'
Please could someone tell me what is wrong with this code - on(release)
gotoAndPlay("2")'{'
this is the error that comes up and i have tried changing it but it is not working
**Error** Scene=Scene 1, layer=Layer 2, frame=1:Line 2: '{' expected
gotoAndPlay("2")'{'
Total ActionScript Errors: 1 Reported Errors: 1
ThanksIf you have a frame labelled "2" then it should be:
on (release) {
this._parent.gotoAndPlay("2");
or other wise just the following to go to frame 2:
on (release) {
this._parent.gotoAndPlay(2);
You just had a missing curly bracket... -
I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I can't figure out what's wrong with this code
First i want this program to allow me to enter a number with the EasyReader class and depending on the number entered it will show that specific line of this peom:
One two buckle your shoe
Three four shut the door
Five six pick up sticks
Seven eight lay them straight
Nine ten this is the end.
The error message i got was an illegal start of expression. I can't figure out why it is giving me this error because i have if (n = 1) || (n = 2) statements. My code is:
public class PoemSeventeen
public static void main(String[] args)
EasyReader console = new EasyReader();
System.out.println("Enter a number for the poem (0 to quit): ");
int n = console.readInt();
if (n = 1) || (n = 2)
System.out.println("One, two, buckle your shoe");
else if (n = 3) || (n = 4)
System.out.println("Three, four, shut the door");
else if (n = 5) || (n = 6)
System.out.println("Five, six, pick up sticks");
else if (n = 7) || (n = 8)
System.out.println("Seven, eight, lay them straight");
else if (n = 9) || (n = 10)
System.out.println("Nine, ten, this is the end");
else if (n = 0)
System.out.println("You may exit now");
else
System.out.println("Put in a number between 0 and 10");
I messed around with a few other thing because i had some weird errors before but now i have narrowed it down to just this 1 error.
The EasyReader class code:
// package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* <i>Java Methods: An Introduction to Object-Oriented Programming</i>
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* <i>Java Methods AB: Data Structures</i>
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
Can anybody please tell me what's wrong with this code? ThanksString[] message = {
"One, two, buckle your shoe",
"One, two, buckle your shoe",
"Three, four, shut the door",
"Three, four, shut the door",
"Five, six, pick up sticks",
"Five, six, pick up sticks",
"Seven, eight, lay them straight",
"Seven, eight, lay them straight",
"Nine, ten, this is the end",
"Nine, ten, this is the end"
if(n>0)
System.out.println(message[n]);
else
System.exit(0); -
What's wrong with this function
What's wrong with this Function(PL/SQL) in this formaula column definition in Reports 6i
function currdateFormula return Date is
curr_date date;
begin
select to_char(sysdate, 'DD-MM-YYYY') into curr_date from dual;
return(curr_date);
end;
I get the following error in compiling
REP-1401. 'currdateformula'.Fatal PL/SQL error occured. ORA-01843 not a valid month.
The SQL select to_char(sysdate, 'DD-MM-YYYY') from dual; worked well in SQL Plus prompt.
I got a clean compile when i use just sysdate in the function (see below).
function currdateFormula return Date is
curr_date date;
begin
select sysdate into curr_date from dual;
return(curr_date);
end;
Appreciate your help
Raja Lakshmihello,
what you are trying to do :
fetch the current date and return it as the result of the formula-column.
what you are actually doing :
fetch the current date, convert it to text, assign this text to a date-variable which causes an implicit type-conversion.
in your case you create a date-string with the format dd-mm-yyyy. the implicit conversion then tries to convert this string back to date using the NLS settings of your session. depending on your NLS_LANG and NLS_DATE_FORMAT this might work, if your session-date-format is dd-mm-yyyy which obviously it is NOT as you get the error.
what you should do :
select sysdate into curr_date from dual;
this fetches the sysdate and stores it in your date-variable. there is no type conversion needed what so ever.
regards,
the oracle reports team -
What's wrong with this SQL?
what's wrong with this SQL?
Posted: Jan 16, 2007 9:35 AM Reply
Hi, everyone:
when I insert into table, i use the fellowing SQL:
INSERT INTO xhealthcall_script_data
(XHC_CALL_ENDED, XHC_SWITCH_PORT, XHC_SCRIPT_ID, XHC_FAX_SPECIFIED)
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N'
FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION
SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT, HH_SCRIPT,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
I always got an error like;
VALUES (SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS'), HH_SWITCHPORT,
ERROR at line 3:
ORA-00936: missing expression
but I can't find anything wrong, who can tell me why?
thank you so much in advance
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:38 AM in response to: jerrygreat Reply
For starters, an insert select does not have a values clause.
HTH -- Mark D Powell --
PP
Posts: 41
From: q
Registered: 8/10/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:48 AM in response to: mpowel01 Reply
Even I see "missing VALUES" as the only error
Eric H
Posts: 2,822
Registered: 10/15/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:54 AM in response to: jerrygreat Reply
...and why are you doing a UNION on the exact same two queries?
(SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE' UNION SELECT TO_DATE(HH_END_DATE||' '||HH_END_TIME,'MM/DD/YY HH24:MI:SS') ,HH_SWITCHPORT ,HH_SCRIPT ,'N' FROM tmp_healthhit_load WHERE HH_SCRIPT !='BROCHURE');
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:55 AM in response to: mpowel01 Reply
Hi,
thank you for your answer, but the problem is, if I deleted "values" as you pointed out, and then execute it again, I got error like "ERROR at line 3:
ORA-03113: end-of-file on communication channel", and I was then disconnected with server, I have to relogin SQLplus, and do everything from beganing.
so what 's wrong caused disconnection, I can't find any triggers related. it is so wired?
I wonder if anyone can help me about this.
thank you very much
jerry
yingkuan
Posts: 1,801
From: San Jose, CA
Registered: 10/8/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 9:59 AM in response to: jerrygreat Reply
Dup Post
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:00 AM in response to: Eric H Reply
Hi,
acturlly what I do is debugging a previous developer's scipt for data loading, this script was called by Cron work, but it never can be successfully executed.
I think he use union for eliminating duplications of rows, I just guess.
thank you
jerry
mpowel01
Posts: 1,516
Registered: 12/7/98
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:03 AM in response to: yingkuan Reply
Scratch the VALUES keyword then make sure that the select list matches the column list in number and type.
1 insert into marktest
2 (fld1, fld2, fld3, fld4, fld5)
3* select * from marktest
UT1 > /
16 rows created.
HTH -- Mark D Powell --
Jagan
Posts: 41
From: Hyderabad
Registered: 7/21/06
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 10:07 AM in response to: jerrygreat Reply
try this - just paste the code and give me the error- i mean past the entire error as it is if error occurs
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
Regards
Jagan
jerrygreat
Posts: 8
Registered: 1/3/07
Re: what's wrong with this SQL?
Posted: Jan 16, 2007 11:31 AM in response to: Jagan Reply
Hi, Jagan:
thank you very much for your answer.
but when I execute it, I still can get error like:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
so wired, do you have any ideas?
thank you very muchAnd this one,
Aother question about SQL?
I thought I already told him to deal with
ORA-03113: end-of-file on communication channel
problem first.
There's nothing wrong (syntax wise) with the query. (of course when no "value" in the insert) -
I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing
Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder. -
What's wrong with this content type definition?
Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
weird) 2) custom order. Where is it getting that Member field from?
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Parent ContentType: Folder (0x0120) -->
<ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
Name="Folder_OrderColumn"
Group="Custom"
Description="Folder with order column"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
</FieldRefs>
</ContentType>
</Elements>Hi,
According to your post, my understanding is that you had an issue about the custom content type with custom column.
I don’t think there is any issue in the content type definition, and it also worked well in my environment.
Did you have the Member field in the project?
I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
By doing this, it will be easier to find out the root cause of this error.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
This is actually "specific" to this Photoshop Forum.
I typically get responses back from other Adobe forum promptly.
Chime in.The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING! Please name any other big company where you get to interact with the engineers AT ALL. I can't. But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
Your comments are more along the line of "I pay a huge amount, for that I expect better support". These are very valid comments. But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL. In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
At the higher level, Adobe may simply not be spending enough on support for literally millions of users. Is is greed or smart business to try to minimize support cost? That's up for individuals to decide.
I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
-Noel -
What's wrong with this simple code?
What's wrong with this simple code? Complier points out that
1. a '{' is expected at line6;
2. Statement expected at the line which PI is declared;
3. Type expected at "System.out.println("Demostrating PI");"
However, I can't figure out them. Please help. Thanks.
Here is the code:
import java.util.*;
public class DebugTwo3
// This class demonstrates some math methods
public static void main(String args[])
public static final double PI = 3.14159;
double radius = 2.00;
double area;
double roundArea;
System.out.println("Demonstrating PI");
area = PI * radius * radius;
System.out.println("area is " + area);
roundArea = Math.round(area);
System.out.println("Rounded area is " + roundArea);Change your code to this:
import java.util.*;
public class DebugTwo3
public static final double PI = 3.14159;
public static void main(String args[])
double radius = 2.00;
double area;
double roundArea;
System.out.println("Demonstrating PI");
area = PI * radius * radius;
System.out.println("area is " + area);
roundArea = Math.round(area);
System.out.println("Rounded area is " + roundArea);
Klint -
What's wrong with this?HELP
What's wrong with this piece of code:
clickhereButton.addActionListener(this);
^
That's my button's name.
Everytime I try to complie the .java file with this code in it it says:
Identifier expected: clickhereButton.addActionListener(this);
^
Please help.You must have that code in a method or an initilizer block... try moving it to eg. the constructor.
-
What`s wrong with this message "purchase of this item is not currently available"
what`s wrong with this message “purchase of this item is not currently available”,I test my app with sandbox,it always told me this message from this morning,but it was all right last night.
This appears to have been resolved over the weekend. A sandbox status page would be useful. The sandbox does have frequent problems, resulting in quite a lot of lost development time.
-
What's wrong with this formula?
What's wrong with this formula? Why am I getting 0?
Mismatch in data types.
Status, "=*Book*" is fine, as the content of the status column is text, and the condition is comparing it to a text string (with wild cards)
But
Event Date, "=*2011*" compares a Date and Time value in Event Date to a text string (with wild cards).
Here's a demonstration, using COUNTIF to stand in for COUNTIFS.
Note that the "book" counts are all correct.
Note that the first Date count counts both occurrences of Jan 2, 2012 in column A, despite the difference in format used in displaying the dates, while the second counts neither, due to the wild card forcing it to look for a text string, not a Date and Time value.
For your case, you'll need a COUNTIFS formula with three test-range, condition pairs:
=COUNTIFS(Schedule :: $A,"=*book*",Schedule :: $B,">="&B2,Schedule :: B,"<="&B3)
Regards,
Barry
Maybe you are looking for
-
Canvas Output to Broadcast via mini-DVI to Composite Video?
Hello, I would like to send the output of my NTSC Canvas to my NTSC broadcast monitor via it's Composite input. I run FCP 6.0.3 on OS 10.5.3 and I was hoping I could make this connection via Apple's mini-DVI to Composite adapter. I seem to be all set
-
Question about SOAPBody # extractContentAsDocument()
Hi java experts, I have a question about a method SOAPBody # extractContentAsDocument(). According to its javadoc, http://docs.oracle.com/javase/6/docs/api/javax/xml/soap/SOAPBody.html#extractContentAsDocument%28%29 when you use this method, "The chi
-
Printing photos with Titles?
Can this be done? How?
-
Hi, I have used the web services support of JSC, it's good for simple method accesses. For example getCurrentTemp() returns float and I can easily use it. But for complex return types for example getInfo(zip) method of one webservice returns a XML pa
-
Problem releasing workbench transports
We had created a number of changelists in our workbench and are trying to release these to transport them into out test system. When we release the transports which are created without issue in the development workbench we get the following message: