What is wrong with Firefox 3.1 Beta 2?

I am denied to use buzzword because my browser is not
suppored, you say. You support 3.0, why not 3.1 Beta 2?

Hello guemro,
We too, at Acrobat.com, are still in beta as well, and aren't
able at the current time to test and support all of acrobat.com's
services against more beta versions of browsers as they come out,
otherwise we'd not have much time to work on Acrobat.com's other
necessary improvements and updates that are in the works!
More browser support is planned in the future, but for now we
are doing what we can. Stick around.
Here is a list of officially supported browsers with
Acrobat.com.
http://www.adobe.com/acom/systemreqs/index.html
Thanks!
Pete

Similar Messages

I keep getting prompts to update my Firefox to 4.0.1 but I already use 4.0.1. What's wrong with Firefox that it keeps sending these?

I keep getting prompts to update my Firefox to 4.0.1 but I already use 4.0.1. What's wrong with Firefox that it keeps sending these prompts and what can I do to stop them?

I keep getting prompts to update my Firefox to 4.0.1 but I already use 4.0.1. What's wrong with Firefox that it keeps sending these prompts and what can I do to stop them?

I get an "Error Encountered" message from Semantec when I use Firefox to visit any web-site. What is wrong with Firefox?

Even now while visiting support.mozilla.com, I get an "Error Encountered" message from Symantec. I don't get this message from Safari.
Symantec suggests that I support the site to Symantec, but it is every web site I visit using Firefox.
What's wrong with Firefox? on the Mac?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
*https://support.mozilla.com/kb/Mozilla+Crash+Reporter

What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help

What is wrong with Firefox ---It will not pull up anything the way it used to --having to use exployer instead ---Help
The catalog of our University will not pull up properly on Firefox but will on internet exployer Why?

The #rdn# is a url variable that is pass to this form from
another page. I put it in a hidden filed and originallly used it as
from.rdn. That did not make a difference, so I just used rdn.
The cfoutput to display the rdn, partnumberid,
deliverynumber, totalrows, and row, all display properly. I even
use those in the query anlayzer and the update works.
I will remove the crparam and see if that makes any
difference. This is very frustrating since there are no error
messages and I am led to believe the code works.

What is wrong with firefox?

What is wrong with firefox?

Do you have any problems with Firefox?
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
*https://support.mozilla.org/kb/Basic+Troubleshooting

What is wrong with FireFox, ever since 5.0 it's been nothing but slow, and crashes, and 6.0 is not better??

Ever since version 5.0 I have had trouble with FireFox...extremely slow, and crashes multiple times a week. 6.0 is no better...same results.
''Edited by a moderator due to language. ''

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

My Firefox would not connect to Internet--had to use IE explorer to get on Internet. What's wrong with Firefox?

I have downloaded Firefox again--Firefox Setup Stub 26.0 and tried to install but received message that I had to close Firefox first. I did not have Firefox open. When I do try to open it Firefox appears on my desktop monitor but it will not do anything after that. I can't even close it and have to go into my task manager to get it to close. Thanks be to God I didn't uninstall IE because that is what I have to use now to get on the Internet. Is there any solution to this problem I am having? This happens to me quite often and I have been considering returning to IE as my browser instead of continuing with Firefox.

Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Configure firewalls so that Firefox can access the Internet]]
A couple of other suggestions:
(1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
(2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]]

Not only does Adobe flashplayer continue to crash on my operating system (windows 7) but now java script is having issues .... what is wrong with firefox????

for months I have checked the forums, and seen the same issues with Adobe Flash Player ... I have uninstalled and reinstalled too many times now and am totally frustrated with Firefox,. I just get it working again and Firefox updates and then I have the same issues ... and now my java script is screwing up and it never did before .... this all came after the latest update .... is anyone else having these issues or is my operating system under attack???

Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped!

When accessing Sams Club web site using Firefox and go to Photos, then Pricing, it brings up Digital Photo Center, but when I click items nothing comes up. I turned on my IE and the information was there. What's wrong with Firefox.

When you go to the link above go to Pricing Under Information - last item). That takes you to Sam's Digital Photo Center page. On the left side click on any of the items listed and I get nothing. This information shows on IE

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Facebook has not been loading properly for me since Feb. 22/14. Can you please check what is wrong with Firefox. The web-site Facebook works fine on Safari.

I've had issues with Facebook not loading certain areas of the web-site correctly or fully since Feb. 22. When I first go onto Facebook I am on the home page "news feed". Thing is when I click on the tab at the bottom of the news feed that says "see more", nothing is happening. It refuses to open the feed up to older posts which friends or myself have posted. Only about 6 - 8 posts at the max show on that home feed. That's it.
My other issue, also in Facebook is when I go to access my "messages". First click on the tab "messages" brings up a white page. Then if I refresh the page to see if it will load, the messages page loads very weird. It shows the last message I may have replied to at the bottom of the screen, but over lapping on top of the list of previous messages to the left of the page. Plus the page appears extremely different than it should. Just like it's been re-formatted or whatever.
Since these 2 issues started on Saturday afternoon I've switched over to the Safari browser on my iMac. On that browser Facebook is performing properly, as it should be. It's not overlapping messages. Plus the home feed isn't refusing to extend for me so that I may view older stories or posts by friends. All appears fine while accessing Facebook on the Safari browser. Not so while on Firefox. I am running the most up to date version of Firefox. "27.0.1" Plus I have a habit to clear the browser's history daily & restarting the browser as well as my iMac. So I do not believe those are my problems. I feel there may be something you guys there at Firefox should look into on this.
Thank you for your time.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Wtf????google yahoo even facebook become untrusted issuer?????what's wrong with firefox

i know what's the meaning of untrusted website....
but what the hell can i do with a internet without facebook google and yahoo???
i havent been using computer for a while and when i look up on the internet today
i can only search youtube and my own school website
please help me the solve the problems
this thing confused me for whole day
thanks you

Try to rename the cert8.db file (cert8.db.old) and delete the cert_override.txt file in the Firefox profile folder to remove intermediate certificates and exceptions that Firefox has stored.
If that has helped to solve the problem then you can remove the renamed cert8.db.old file.
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previously stored intermediate certificates.
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
If that didn't help then remove or rename secmod.db (secmod.db.old) as well.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Whenever firefox is opened, it freezes. This has occurred after I updated adobe reader recently. What's wrong with firefox and what can I do?

Recently firefox will open but then freeze immediatly. This has occurred after I updated adobe reader. I'm not sure if that affected firefox, but the time period fits. Restarting my computer has no effect on firefox.

The Adobe DLM is not required for Adobe products to work. You can uninstall it by opening the Windows Control Panel and selecting Add or Remove Programs. In the list of programs select Adobe DLM (may be listed as Adobe Download Manager) and click on remove.

Firefox has crashed for me about 5 times in a 20 min span. A total of about 10 times today. What's wrong with it? Is it my laptop

Firefox has crashed for me about 5 times in a 20 min span. A total of about 10 times today. What's wrong with it? Is it my laptop? Sometimes as soon as I open it, it just crashes.

I started my work in safe mode still facing the same problem.
bp-f5ee8a8f-e696-4465-82ba-7f1ac2130313 3/13/20131:13 PM
bp-2f8bb393-9de8-41c9-843c-a46c62130313 3/13/20131:09 PM
bp-a930e700-04c1-4d6e-985a-5d7482130313 3/13/20131:02 PM

What's wrong with my browsers?

When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny.
One moment i'm surfing webpages with safari or firefox.... Chatting with AdiumX or MS Messenger... and suddenly it just stops... Msn is getting time-out's, Safari says I'm not connected.
But Airport sais it is still connected to my wireless network (with all the black bar's filled). It has valid IP adress etc, But everywhere I want to go on the internet it sais I'm not connected.
When I disconnect the airport en let it reconnect with my wireless network, the connection is fine.
how can i fix this?

Most users shouldn't be manually entering DNS addresses, and those DNS addresses you mention probably aren't intended for end users. Is Level3 your ISP?
That doesn't answer 'what's wrong with my browsers?', but a good start would be to configure your network according to your ISP's instructions. If you have DNS problems then, you might try using OpenDNS.

What is wrong with as3

this is not a question about 'how i do X'. is rather a 'discussion' (flame or whatever, but to defend or argue about aspects, not people) about 'what is wrong with as3' and what aspects whould be taken into consideration for updates. right now i am using as3, and since i paid for this license, i choose this tool over some alternatives and i am using it to do stuff for other people who pay me to do it, i think it can be helpful for all of us if some actions are started in the right direction. i have already posted about 'all people in adobe are dumbasses that do not know how to make a scripting tool and are messing up my work', but i was pissed at the time (i still am pissed) but i believe this is not the right aproach. instead, if this goes to the right people in adobe, we all may get something in the future, like better and easier todo apps and web presentations.
pre: not only about the as3 specification, but COMPLY with the specification that you set. for example, some time ago there were problems with matrix transforms. this was corrected later with a patch. but this means it is not even doing what is is supposed to do
1. scriptable masks and movement, sprites and child sprites: there is a sprite with a mask, the mask is a shape drawn via script, something like
somemask=new shape();
somemask.graphics.beginfill();
(...etc)
somesprite.mask=somemask;
just like that. now add some child sprites to 'somesprite', and make 'somesprite' move, scale and rotate. there you will have something like a kaleidoscope, but not what you expected to do with your script. as the child sprites move in the parent mask, you will see that the child sprites appear or dissapear kind of randomly, and if the child sprites are textfields, it may be that the text is rendered outside the mask, or partially rendered outside the mask (as in only part of the text), rendered with the wrongf rotation or in the wrong place. some child sprites are clipped correctly, some dissapear totally when only a part should dissapear (clipped) etc.
way around: have not tried it yet, but i have the impression that bitmaps have different criteria for clipping, so i am thinking of trying this: appli an empty filter (a filter with params so it does not have any effect on the sprite or in the textfield) so the sprite is rendered as bitmap before doing anything else with it. as i said, i have not done it yet, but it may be a way around this problem, to avoid all this inconsistency with clipping
1-b. inconsistency between hierarchy and coordinates, specially masks: you apply a mask to a sprite, yet the sprite has a set of coordinates (so 'x' in the sprite means an x relative to its container), yet the mask applied to the very same sprite, as another reference as reference for coordinates (like the stage)
2. painting via script: in any other languaje, in any other situation, something like:
beginFill(params);
(...stuff 1)
endFill();
beginFill(params);
(...stuff 2)
endFill();
(...etc)
means: render region of block 1, then render region of block 2 etc, and no matter what, it should be consistent, since there is noplace for ambiguity. if you read it, you may think what that means, even if you dont run it you may have an idea of the picture you want to draw, but not with as3. as3 somehow manages to screw something that simple, and mixes all the blocks, and somehow uses the boundaries of one block as boundaries for other block. is like all blocks are dumped into whatever, and then uses all lines defined into it as boundaries for a unique block. it changes all boundaries and generates inconsistency between what is shown and redraw regions of the resulting picture, like lines that go to the end of the screen and then dont go away in the next frames, even tough the beginfill endfill block should prevent it
3. event flow: i dont know what was the policy behind as3 event flow design. it is in no way similar or an extension to previous event flow, neither with any event flow in any other plattform. i dont know how most people start with as3; in my case, i unpacked, installed and when i tried to do something with what i already knew i could not, so i started reading the as3 docs, and since is like 800 pages long, i just read the basics and the rest i would 'wing it'. in the part of the event flow, there was something about bubbling and stuff, it was not clear at all and when i tried to do what is was said in the documentation (like preventing events to 'bubble', as is called in the documentation), i could not see any effect but i could see it was a mess. flash is not the only thing out there to work with pictures or to work with mouse events, but is the only one that deals with things like 'target' and 'currentTarget'. my first experience on needing this was when i was dealing with my own event handlers (so the only thing that had control over mouse was the stage, and i would admin everything via script). there were events generated everywhere, the stage got events that were not genrated directly over the stage, but got there not with stage coordinates but the coordinates relative to the sprite that generated the event. so if i hover the mopuse over the stage, and the stage has some things on it how does it work? i get multiple event calls, like it was hovering multiple times over the stage in a single frame, but in each call with different coordinates? and what if i set all child sprites as mouseenabled=false or compare like 'if (event.target != event.currenttarget)', what if i move the mouse over a child, does it prevent the move mouse event at all? or does it filter only the event call with only stage coordinates? in my case, every time i move over another clip (with mouseenabled = true), the stage gets it as 'mouse up', even tough there was never a mouse release, what the hell? do even the people at adobe know how to handle events with their own tool when they require it? why does an event 'bubble' when i have not specifically tell it to do it? mi thought is that this event flow was very poorly conceived, and tough the intention may have been that there were different cases and it shopuld cover all cases, they actually introduced new problems that were not present in traditional ways to handle it, and it is neither the easier way to handle things, and this way, a very simple problem turns into a very ugly thing because it must handle things that were not neccesary to handle, or were implicit in other situations.
4. legacy: since as3, all interaction is different, and if you want to do things in the new plattform, using the new features, what you already knew just goes to the garbage can. when a new tool arrives, it should be an extension to previous tools (which is a reason to update instead of just buying a new tool from a different vendor). if everything i had or knew just means nothing from now on, then i can not say 'i know flash script', and my previous knowledge gives me no advantage when aproaching the new version. as3 is a new aproach that requires doc reading and stuff, even if you knew something about previous as specifications or other oo languajes. if you decide to change things from now on, like the things mentioned in this post, instead of just throwing away everything the users alerady knew about the tool, do like in java releases, they mark some things as 'deprecated', they keep working as they should, give a warning, but also a message saying this feature is deprecated, we suggest you use this library instead.
5. lack of previous functionality: if you 'update' something, it meand all previos functionality is still there (probably improved, but not with bugs if it was working fine), plus something else. now it seems backwards, there are some things that could be done in previous versions but not in this one, like 'duplicatemovieclip'
6. inconsistency with scripting/programming paradigms: (ok, fancy work, but fits perfectly here): as3 proposed ways to handle things, but the people who designed it got 'too creative', and they did something that is not consistent neither with previous versions of as or with other languajes. the documentations is full of things like 'it looks like x languaje or languaje family, but instead of using XXX word, you must use YYY'. great, what is this? namespaces 'work like', but 'differently' for example from java, .net, .c. its got the idea that a namespace means a grouped functionality but there are rules about where should be placed the file (ok, java has this also, .net takes care of it automatically if all files are registered in the project), but what you got is a mess that 'if you know other languajes you got the general idea, but nonetheless, even if you knew this or previosu versions of as, you still have to read whatever we decided arbitrarily just to be different'. namespaces, event handling, vars definition which is not like previous scripting neither like fully typed languajes.. is just a mess.
7. lack of scripting and graphics integration: unlike flash and adobe tools that just got on the graphics side leaving all the scripting integratuion apart, most tools from other vendors integrate very well interacton with what is on the screen. the script editor: very poor. autocompletion? a drop down list that does not heklp at all, appears in the wrong places, and when you need it to go, it does not go (so if i want to move away from the uncalled drop down list, i have to click somewhere else, making developement slowewr instead of helping, so the drop down list does not capture all events when i dont want to). in other ides you double click somewhere and it will go to the part of code relevant to that event or whatever. for example microsoft tools, ok i am antimicrosoft, and one of the reasons was that when windows 95 got to market proposing itself as the ONLY pc os you could use if you wanted to keep useing the apps you already had, it was a lousy product full of flaws but you had to keep using it because you had no choice. what is so different from what is happening with flash just now? yet the ide of c# is awesome, works very well and seems reliable.
adobe people: not all user are designers that just make pretty pictures. if it is not intended for scripting then why is it there. and if there are corrections to be done, they should patch all versions, not only the last one. previous version users also paid for their versions.

Well, there is no point in arguing.
I personally believe AS3 does exactly what it promises to do within limits (read: reasonable limits) of ECMA type of language. And sometimes it doesn’t do what we expect it to for it cannot possibly emulate everyone’s thinking process. The task, I guess, is to learn to think in terms of AS3 – not to try to make AS3 think like us. No language covers all the grounds. And no, it is not Java - with no negative or positive connotation. It is what it is. Period. I just hope that AS5 will be more Java like.
You are right about the fact that it is not necessary to know all the aspects of language in order to perform the majority of tasks. But it is paramount to have a clear idea about such fundamental concepts as display list model and events. For instance, depth swap has no meaning in terms of AS3 because display list object stacking is controlled automatically and there is no need for all these jumping through hoops one has to perform in order to control depth in AS2. There no more gaps in depths and one always know where to find things.
Similarly, there is no point in having duplicateMovieClip method. More conventional OOP ways of object instantiation accomplishes just that and much more. Just because OOP object instantiation needs to be learned doesn’t mean past hacks have place in modern times. duplicateMovieClip is a horse carriage standing next to SUV. What one should choose to travel?
Events are implemented to the tee in the context of ECMA specifications. I consider Events model as very solid, it works great (exactly as expected) and never failed me. True, it takes time to get used to it. But what doesn’t?
By the way, speaking about events, contrary to believe in Adobe’s inconsideration to their following. Events are implemented with weakly reference set to false although it would be better to have it set to true. I think this is because there are smart and considerate people out there who knew how difficult it would be for programming novices to deal with lost listeners.
I think AS3 is million times better than AS2. And one of the reasons it came out this way is that Adobe made a very brave and wise decision to break totally loose from AS2’s inherent crap. They have created a totally new and very solid language. If they had tried to make it backward compatible – it would be a huge screw up, similar to how our friends at Microsoft are prostituting VB and VBA – extremely irritating approach IMHO.
Also, Flash legacy issues shouldn’t be overlooked. Flash did not start as a platform for programmers. Entire timeline concept in many ways is not compatible with the best OOP practices and advancements. I think for anyone who is used to writing classes the very fact of coding on timeline sounds awkward. It feels like a hack (and AS2 IS a pile of hacks) – the same things can be nicely packaged into classes and scale indefinitely. As such I wouldn’t expect Adobe to waste time on hacking timeline concept issues by making smarter editor. They have made a new one – FlexBuilder – instead. Serious programmers realize very soon that Flash IDE is not for developing industrial strength applications anyway. So, why bother with channeling great minds into polishing path to the dead end?
I would like to state that all this is coming form a person who knew Flash when there was no AS at all. And I applaud every new generation of this wonderful tool.
I believe Adobe does a great job making transition from timeline paradigm to total OOP venue as smooth as possible. And no, they don’t leave their devoted followers behind contrary to many claims. They are working on making developing Flash applications as easy as possible for people of all walks. Welcome Catalyst!
Of course there is not enough information about AS3 capabilities and features. But, on the other hand, I don’t know any area of human kind activities that does.

What is wrong with Firefox 3.1 Beta 2?

Similar Messages

Maybe you are looking for