What is wrong with my Airport Extreme with a poor wireless signal?

I have had my AEBS for around 2 months and haven't noticed before, but recently I am getting poor speeds.  I noticed my wired connections get about 5-15 Ping times and my wireless get about 100 ping and seems to freeze up a bit, web pages stop loading etc.  iStumbler can't find a network on channel 149, but my signal is still showing Red two bars and 26% Signal.  Noise is 11% for all networks.  My g network is Yellow three bars 39%.  I expected them to be better GREEN.  Standing two feet from it, they jump to 70%.  I haven't noticed a difference in ping between where I stand, so they may not be related.  My main concern is the poor ping and freezing up of my web browsing.  Any help is greatly appreciated.  Thanks

Small update - it isn't just cron that fails. Any mail sent via Unix mail bounces. The receiving address doesn't matter...it all bounces. Is there a setting on the base station I need to change?

Similar Messages

  • Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?  It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

    Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?  It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule.  Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades).  Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems.  But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule.  Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it.  Is there a work around?  Would a newer but old Airport Express be able to extend network to Sunflower?  Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
    Another question--before I used MAC addresses to control who could access network.  Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

    Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
    I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
    My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
    Another question--before I used MAC addresses to control who could access network.  Now on Time Capsule I don't see anything about this
    When you edit your TC's settings the access controls appear under the Network tab, don't they?

  • Airport extreme won't see wireless signal

    Hiya
    I have an early 2005 mac mini. i had an airport extreme card installed a few months ago and have been able to log onto wireless internet no problems.
    i have now moved house and can not connect to the new wireless network. My mac book pro can find my "beboX" signal no problems, although it does seem slower than my housemates connection on PC. The mac mini can sometimesfind the bebox but is unable to connect to it.
    my feeling is that there is a problem with my mac mini's airport... i have downloaded the latest airport software and am wondering if i need to upload latest firmware...HOWEVER can not find latest firmware for 2005 mac mini on the apple website.
    Please please please can someone help. i need to get my little mini online and have no idea why it won't. perhaps because there are several people using our wireless connection and and the mac mini is the slowest so canb't get on...?
    charlotte

    Probaly the computer is to far away,to many obsticalls,or set up rong. from what you said it sounds like it is not set up corectly. go to systemprefrences/network. on the drop down menu for "Show" go to network port configurations. there it will show ways to conect to the internet. un check the ones you are not going to use. the one you are using is airport so drag it to the top of the list. this is how it is on os x 10.4. depending on how many computers are conected the router may not suport that many computers. for the firmware run sowftware up date under the apple at the top of the screen.
    Mac Mini late 2006   Mac OS X (10.4.10)  
    Mac Mini late 2006   Mac OS X (10.4.10)  

  • Problems with connecting AirPort Extreme with SBC DSL Modem

    We bought the AirPort Express specifically because we were told it was a snap to setup with Windows and DSL. I cannot get it set up. Have Windows Vista, AT&T DSL and a 5100 Speed Stream DSL modem. After a couple of failed attempts, I called AT&T support for help and was told to make a change to the settings on the DSL modem. Still didn't help. When I gave up on the AP Ex and tried connecting the DSL cable directly to the computer, I couldn't get connected to the internet at all so spent another hour on the phone with AT&T support to get things working. Second support person told me that the suggestion I was given was wrong but it is on the 5100 Speed Stream support page so I'm not sure. Thanks for any suggestions.

    Thank you so much for your help. I tried those settings but the connection didn't work. However, it is working by leaving some of the default settings. See the underlined settings below.
    That leaves me with other questions:
    1) But what are the conquences of those settings?
    2) How do I determine if I have a secure network? (other than the computer, don't have any other wireless devices to check though we are planning to purchase one in the future).  When I check on the windows network
    center, everything is "off" except password protected sharing. I was hoping to see a security-enabled network identification for this new network somewhere.
    2b) I set up wireless security WPA/WPA2 Personal but not a guest network (yet).
    3) A problem (amber light) was discovered because:
    Allow Setup over WAN was checked. For now, I ignored the warning for now but think I need to change it.
    4) under the AirPort Utility/Summary page, what should the IP address be? It is completely different than the IP address for the DSL modem.
    5) The reason I didn't set up a guest network yet was when I originally tried to set it when when "Connection Sharing" was set to Off (Bridge Mode) - as suggested -  I received a warning that Guest network requires that this AP Express needs to be set to share a public IP address uding NAT/DHCP.
    Sorry for the very basic questions. This obviously is my first attempt at setting up a wireless router.
    And thanks for any help.
    To set up the AXn as a "bridge," using the AirPort Utility, either connect to the AXn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AXn, and then, try these settings: 
    AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless tab
    Wireless Mode: Create a wireless network
    Network Name: <enter the desired Network Name or SSID>
    Radio Mode: 802.11n (802.11b/g compatible)    Set to automatic instead (and finding 80211a)
    Channel: Automatic
    Internet > Internet Connection
    Connect Using: Ethernet
    Configure IPv4: Using DHCP
    Ethernet WAN Port: Automatic (Default)
    Connection Sharing: Off (Bridge Mode) Set to share a public address

  • What printers are compatible with the airport extreme?

    What printers are compatible with the airport extreme?

    Virtually any wireless printer will work just fine as well as a printer that connects using Ethernet. If you are looking at an All-in-One type of device....all functions like print, scan, copy, maintenance, etc will be supported.
    If you are looking at USB devices, Apple does not provide a list of compatible models, so It is difficult to say with certainly what will work and what will not. In general, most USB printers will work.
    But....very important....if you are looking at an All-in-One USB device, you need to keep in mind that only the print function will work when the device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance, etc. will not be supported.
    Bottom line...if you are looking at an All-in-One device and you need all of the functions, you need to choose a device that connects using wireless only or Ethernet, not USB.

  • Airport Extreme with Bluetooth 2.0+EDR card question

    Does anybody know what Apple charges for the Airport Extreme with Bluetooth 2.0+EDR card and the install. I've tried to find out at my local Apple store and was told I'd have to make an appt. at the Genius Bar and they are booked solid today. This is going in my PowerMac G5 duel so I can run Apple TV with the Airport Extreme.

    Thanks! for the quick response!
    I'm hoping Apple will coming up with a cheaper option though.
    With everything I need to get Apple TV to work, my best estimate on cost is around $600. Yikes.

  • Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network  with  newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

    My Power Book G3 Pismo with an Airport wireless card  running Mac OS X 10.4.11 will not connect to my new Airport
    Extreme Base Station using WPA Personal/WPA 2 Person encryption.  The Airport firmware is version 9.52.  From
    posts I've read online at different places indicates the Airport card should support the WPA encryption.  Perhaps the problem
    is the Base Station is using a combination setting and the fault is in the base station?
    Thanks for any suggestions

    Perhaps an inexpensive usb wireless adapter would work as well?
    This is probably the simplest way to get the G3 connected to the wireless network.
    I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
    The new AirPort Extreme is broadcasting a wireless signal.
    A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable. 
    This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
    I do have an old Linksys Wireless G router.  I wonder if that would work?
    In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

  • Boosting my signal with two airport extremes

    I have a wirelessN airport extreme in my basement office. I get a wireless signal for my Tivo on the third floor, but it is around 35% signal strength. So I want to boost the signal to get a stronger signal. Which airport product should I use -- extreme or express? Will pairing these boost the signal?
    Thanks

    Welcome to the discussion area!
    You might want to consider all the options to get the best signal possible to the Tivo.
    The absolute "best" way to do this would be to run an ethernet cable from the AirPort Extreme to the Tivo.
    If it's not possible to run the ethernet cable, for the "next best" option, you might consider using a pair of ethernet powerline adapters to accomplish the same task by using the AC wiring in the home to transmit the ethernet signal. While not quite as solid as a formal ethernet cable connection, the latest generation of powerline adapters provide performance that is almost as good as a normal cable...and with faster and more reliable performance than wireless.
    The last option would be wireless. It's possible for either the AirPort Express or AirPort Extreme to "extend" the wireless signal from the AirPort Extreme. This would probably work OK for normal internet browsing and audio streaming, but an "extended" wireless network may or may not be able to adequately provide the extra bandwidth required to download movies or video, especially high definition sources.
    If you decide to try the wireless route, you might want to understand the store's return policy, just in case things don't work out as well as expected.

  • My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book).  The laptop shows reception of other nearby Wi-Fi transmitters, but not mine.  I have changed the bands, but the problem comes back.  Transmitter problem or interference?

    My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book).  My hard-wired iMac still has internet capability.  The laptop shows reception of other nearby Wi-Fi transmitters, but not mine.  I have changed the bands back and forth, but the problem comes back.  How can I check if it is a transmitter problem or interference?

    Let me see if I can suggest a strategy.
    I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
    What modem do you have and what sort of broadband?
    What mode is the AE in.. router or bridge?
    I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
    Is this express or extreme.. the rest of the post you refer to extreme.
    What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
    If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
    Make sure the guest wireless is off.
    Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
    You should see lists of wireless connection like..
    Post as many screenshots of the setup as you can.. it helps loads.
    IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

  • Airport Extreme dropping Internet Despite Strong Signal - Mavericks?

    Hi - I've searched in the threads several times but haven't yet been able to find a resolution for this.
    The past week or so, my Wifi keeps going out at random intervals. I can restart my router and it will come back up, but eventually it will drop again. Thought it was my internet service OR my router, but everything works super fast and steady if I'm connected directly. I really think it's the connection to my 2 year old Airport Extreme that is causing issues.
    The wifi drops (all sites get stuck and say "Resolving Host" before getting a no connection error), but the Airport Extreme light stays green and my WIFI signal shows on my devices with full strength even though it's not working. Again - no problems if I'm connected directly to the internet.
    I thought it was a similar problem to this thread, https://discussions.apple.com/thread/2508959?start=120&tstart=0, however I followed those steps (enable IPv6) and the issue is still occuring. My Airport Extreme is running v 7.6.4.
    I upgraded about a week ago to Maveicks and wondered if that might have something to do with it? Or if anyone has any other ideas? Any help at all is appreciated - it's been maddening rebooting my modem multiple times a day.

    Let me see if I can suggest a strategy.
    I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
    What modem do you have and what sort of broadband?
    What mode is the AE in.. router or bridge?
    I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
    Is this express or extreme.. the rest of the post you refer to extreme.
    What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
    If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
    Make sure the guest wireless is off.
    Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
    You should see lists of wireless connection like..
    Post as many screenshots of the setup as you can.. it helps loads.
    IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

  • When using an airport extreme to extend a wireless modern, will the lan ports work?

    When using an airport extreme to extend a wireless modern, will the lAN ports work?

    The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
    Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

  • Can AirPort Extreme be used as a signal extender?

    Can AirPort Extreme be used as a wireless extender, wi fi booster?

    If you are planning to "extend" wirelessly......the AirPort Extreme will "extend" the wireless signal from another Apple wireless router....but....it will not "extend" the wireless signal from a 3rd party router.

  • I'm trying to hookup my new AirPort Extreme with my net gear 7550 router/modem from Frontier. I'm not getting a wifi signal from the airport. What am I doing wrong?

    What am I doing wrong?

    I'm trying to use AirPort Untility to configure the old APExtreme to extend the network, but it won't let me.
    "Extend" is only used if the two AirPort Extremes are connecting using wireless only.
    "Create" is the correct setting to use since the AirPort Exremes are connecting using Ethernet.
    Configure the second AirPort Extreme to create a wireless network using the exact same wireless network name, same security setttings and same wireless password as the "main" AirPort Extreme and make sure that you are choosing the Bridge Mode option for the second AirPort Extreme before clicking Update to save the settings.
    When you do this, everything will act like one big wireless network and computers will automatically pick up a signal from the AirPort with the strongest signal based on their location.
    This Apple document more details on this....which is called a Roaming Network.
    Roaming network

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

  • What is the best way to hookup my airport extreme with my time capsule ?

    what is the best way to hookup my airport extreme with my time capsule ?

    It sounds like you have the AirPort Extreme configured as the "main" router on your network.
    If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
    Power up the Time Capsule
    Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
    Open Macintosh HD > Applications  > Utilities > AirPort Utility
    Click on the Time Capsule, then click Manual Setup
    Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
    Click the Internet icon, the click the Internet tab
    Insure that the setting for Connect Using = Ethernet
    Insure that the setting for Connection Sharing = Off (Bridge Mode)
    Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
    Then power cycle the entire network by powering everything off....order of power down does not matter
    Wait a minute
    Power up the modem first, and let it run a few minutes by itself
    Power up the AirPort Extreme next and let it run a full minute
    Power up the Time Capsule next and let it run a full minute
    Keep starting devices one at a time about a minute apart until the entire network is back up
    You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
    Open System Preference (gear icon on the dock)
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backups or Use Disk and backups should begin again in a few minutes
    If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

Maybe you are looking for

  • Can not add movie to itune

    Hi,   I just set up new itunes for ipod touch but i just can not add movie file (mp4) to library in itunes. Please help! Thanks so much!

  • How do I quickly update the ActiveX automation references in my VIs when the ActiveX interface changes?

    Hello all, I joined a test automation team in the middle of a large project and inherited a huge set of VIs (over 700) and associated architecture for this automation (not to mention the several thousand TestStand sequences).  Another part of the pro

  • Save dialog box in vista types over file name in InDesign

    Ever since I have upgraded to vista at work I have been having this issue. When I save from InDesign (and only InDesign), I open the folder I need to save my file in. I begin to type the name of the company folder that this file needs to be saved in

  • The N900 is restarting itself AGAIN! :(

    I am sorry for posting this again but the problem "is back" even that I did the ECHO fix my N900 again is rebooting itself It worked great like for 3 hours but I left alone the phone for 30 minutes (aprox) and when I tried to use it again it rebooted

  • How to get sytem information in abap

    Freinds, I want to create a screen/report form by executing them  or on that sceen user can know his/her computer existing ip,computer name please suggest.