What is wrong with Separation Preview SLOW SLOW SLOW V2

In Acrobat 7 I could toggle colors on off on off on off to see what my seps would do, check K.O., traps, builds  etc.
I cannot even toggle on off on off in 9. I have a horrid delay between the spot color clicks and the entire production comes to a halt and has even unexpectedly quit.
Has the jump to 9 from 7 made a function that worked flawlessly into such a memory hog that I need to add freaking ram to view what my Seps look like!
Rendering settings?
Can this be changed.
What I have found is  I MUST click the checkmark to turn the color sep off, move my mouse, click again someplace like the color name, move my mouse back to the unchecked checkmark box, click again and turn the now off separation back on. I cannot just leave my mouse in he same location I MUST move my mouse and add a click on nothing. So to view and toggle color separations off/on, the action has changed from CLICK OFF CLICK ON CLICK OFF to CLICK OFF MOVE MOUSE CLICK NOTHING MOVE MOUSE CLICK ON.

It's not in Acrobat 9. Before I upgraded to Acrobat X, I used Separation Preview on a Mac in Acrobat 9 for two or three years, with no slowdown whatsoever.
It's something gone wrong with your copy.
I would consider uninstalling Acrobat 9 and reinstalling it again if it's bugging you as much as you indicate.

Similar Messages

  • What is wrong with my Macbook Pro? (distorted screen, beeping, slow)

    I have a late 2012 Macbook Pro (13-inch) that I got from Best Buy. It worked perfectly fine for a year, but then went crazy.
    First, it started shutting down here and there, and icons bounced a lot in the dock. Then, one day, I googled something and it froze, then flashed a strip of multicolored barcode-like lines. So, I shut it down and it overheated then began to beep 3 times and flash a light.
    I brought it in and they just wiped the hard drive. Then, it happened again while I was watching a video only a short time later. I was going to re-seat the RAM myself but the inside of the computer looked all messed up. I took it in and they gave me a new LCD but it has a dead pixel now. It worked fine for 1 month after that.
    Then, I was using the laptop on my bed and it shut off randomly a couple of times while I was on Facebook and started beeping. I rebooted it and tried to fix it but it happened again the next day. I brought it back to Best Buy and they said it was hot and sold me a $20 cooling pad.
    That worked for a few days, then I was watching TV online and it happened again. I brought it back to Best Buy and they replaced the RAM. Now, I was watching something online and it happened yet again. I was able to reboot and it worked okay now for a couple of hours but it did freeze again and I had to shut it down.
    Everytime I go to Best Buy, they tell me "If we have this issue 1 more time, we will replace your computer." But, then, they say the same thing every time and that it's their policy. I have paid for Office now and only have 1 download left. Also, this is ridiculous because I'm a student and I've had my Mac gone for 2 weeks at a time at least 3 or 4 times. When this happens, I get stuck using my iPad and can't use flash so I've spent tons of money of apps for flash and other things to make my iPad functional.
    Can somebody just tell me what's wrong with it? It "passes the hardware test" every time and the Geek Squad keeps asking me stupid questions like "Did you check your internet connection and reset your modem?" When I asked them the first time to do a PRAM test, they didn't know what that was and asked me to go on iTunes or clear my cache or something like that.
    I have had a bad experience with them altogether. I got my Macbook for $500 because I had a PC before that I paid $700 for and it eventually broke. They were unable to repair that one because the hard drive had failed, although they had previously been convinced that I needed to uninstall my Norton to fix that problem.
    Sorry if I'm ranting, but my Macbook is like a child to me (not to sound weird) and I'm sick of this problem. It's working fine at the moment but I know this will happen again randomly like always.

    If you're able to boot, launch the Console application by entering the first few letters of its name into a Spotlight search, and select the most recent panic log under "System Diagnostic Reports." Post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID” and "Kernel UUID," two long strings of letters, numbers, and dashes in the header and body of the report. Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, including your login items.

  • On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

    On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

    You need to turn off the Zoom accessibility feature.  Tap the screen twice with three fingers to get to normal screen. Then go to Settings>General>Accessibility and turn Zoom off.  You can also do that by connect the computer to iTunes and going to the Summary pane for the iPod and go to Configure Universal Access.
    For more info see:
    iPhone and iPod touch: Home screen icons are magnified or large

  • What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

    What is wrong with the app store and how long before its fixed, im downloading atna very slow pash and i have a 10mb uncontested line.

    Sorry, its on both my iphone 4s (2 iphones) and ipad2 that the app store is slow, I have done all the above and still when i download a 1 mb app it take about a half a hour just to download and previously it wasn't even a second. When browsing the web the devices are fast and internet speed is good, but when going in to app store it takes long to load and show me the new app, updates, featured app ect. We watch movie online and the streaming is brilliant. Even on my windows pc the app store is slow and sometimes says that i store could not be opened, i have also tried on my buddies wifi and there it does exactly the same which makes me think that its on apples side, but why do you not have any problems? 

  • What's wrong with my browsers?

    When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny.
    One moment i'm surfing webpages with safari or firefox.... Chatting with AdiumX or MS Messenger... and suddenly it just stops... Msn is getting time-out's, Safari says I'm not connected.
    But Airport sais it is still connected to my wireless network (with all the black bar's filled). It has valid IP adress etc, But everywhere I want to go on the internet it sais I'm not connected.
    When I disconnect the airport en let it reconnect with my wireless network, the connection is fine.
    how can i fix this?

    Most users shouldn't be manually entering DNS addresses, and those DNS addresses you mention probably aren't intended for end users. Is Level3 your ISP?
    That doesn't answer 'what's wrong with my browsers?', but a good start would be to configure your network according to your ISP's instructions. If you have DNS problems then, you might try using OpenDNS.

  • What's wrong with my iPod's Cover Flow??

    I have an iPod Touch 3rd Gen, 32Gb, and recently updated to IOS 5.
    Since then, the iPod's cover flow feature is extremely slow, doesn't flow smoothly, and crashes after a few (15-20) seconds.
    Today I noted something else: some album covers appear pixelated and blurry, even though HD. Those covers looked just fine until now.
    As a side note, I have in use 30 of the 32 Gb (that's a lot of music, I know). Could this be related? I never had those problems before IOS 5, though.
    What's wrong with my iPod?
    Thanks for your help!

    so as I see it people with this problem have 3 options
    - Make all of your album art a maximum of 500X500 pixels
    - Wait for an IOS update that fixes the problem
    - Scrap ipods and buy another brand of music player
    Using photoshop to do it with, it took me about an hour to resize, change, and resync all of my 1400 songs(86 albums)

  • TA21328 every time I use Safari I receive a message that says Safari is no longer responding because of a script problem with the website and I must press "continue" for the page to continue. This happens with every website I go to.  What is wrong with my

    When using Safari I have begun to notice this box appearing as I try to reach any website:  "Safari is no longer responding because of a script on the webpage and then it lists what ever web page I have tried to reach.  It then asks me if I want to "stop" the script or allow it to continue.  I must "continue" it in order to reach my web page/  If I press "stop" it just keeps coming back and back and I can't continue.  What is wrong with my computer or Sarari or both?

    chick --
    Does it mention "Slow Script?

  • I need help figuring out what is wrong with my Macbook Pro

    I have a mid 2012 Macbook Pro with OS X Mavericks on it and for the past few weeks it has running VERY SLOW! I have no idea what is wrong with it, i have read other discussion forums trying to figure it out on my own. So far i have had no luck in fixing the slowness. When i open applications the icon will bounce in dock forever before opening and then my computer will freeze with the little rainbow wheel circling and circling for a few minutes... and if i try to browse websites it take forever for them to load or youtube will just stop working for me. Everything i do, no matter what i click, the rainbow wheel will pop up! The only thing i can think of messing it up was a friend of mine plugging in a flash drive a few weeks ago to take some videos and imovie to put on his Macbook Pro, he has said his laptop has been running fine though... so idk if that was the problem. Anyways, could someone please help me try something? Thank you!!

    OS X Mavericks: If your Mac runs slowly?
    http://support.apple.com/kb/PH13895
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Increase disk space.
    http://support.apple.com/kb/PH13806

  • What's wrong with my store procedure?

    HI, I can't figure out what's wrong with my stored procedure. I believe i have a "commit;" where it's not supposed to be. What i really want to acheive is save the record once it finds those keywords. Maybe my syntax is all wrong.
    I am getting the following error msg. PLS-00103
    create or replace
    procedure sp_diag is
    DECLARE
    v_setting_key NUMBER(18);
    v_parent NUMBER(22);
    v_name VARCHAR2(100);
    v_class_key NUMBER(22);
    CURSOR c1 IS
    select setting_key, setting_class_key,name
    from cms2wire.setting_list;
    CURSOR c2 IS
    select setting_class_key, parent_class_key,name
    from cms2wire.setting_class
    where setting_class_key = v_parent;
    BEGIN
    OPEN c1;
    LOOP
    FETCH c1 into v_setting_key, v_parent, v_name;
    EXIT when c1%NOTFOUND;
    WHILE v_parent != null
    LOOP
    OPEN c2;
    FETCH c2 into v_class_key, v_parent, v_name;
    CLOSE c2;
    IF v_name='Diag.'or v_name='Settings.' THEN
    COMMIT;
    END IF;
    END LOOP;
    END LOOP;
    CLOSE c1;
    END;
    -------------------------------------------------------------------------------------

    Now, the way I see it, if you want to save the information, then you need to put it some place, so your slow-by-slow stored procedure becomes something like
    INSERT INTO some_table (column list)
      SELECT a.setting_key,
             a.setting_class_key,
             a.name
             b.setting_class_key,
             b.parent_class_key,
             b.name
        FROM cms2wire.setting_list  a,
             cms2wire.setting_class b
       WHERE a.setting_class_key = a.setting_class_key
         AND b.name in ('Diag.', 'Settings.');
    COMMIT;does it not?

  • What's Wrong With This Script

    A couple of years ago I was using an AppleScript file (thanks to someone else's assistance) but it no longer works.
    I have an extra internal drive, that is partitioned, and used for sequential daily backups. When the computer starts up, of course all the drives mount - but I prefer that they are off the desktop until neded.
    Rather than selecting the volumes and then dragging to the Trash, I found it easier to have a script run at startup which then asks if the drives should be unmounted.
    Things were great - until I upgraded to Tiger.
    I am hoping that someone can tell me what's wrong with the script so that I can start using it again. As you can probably tell, I don't have any experience in AppleScript. At the moment the script runs - it presents the dialogue box - and then just ends after a response, but the drives do not unmount.
    The partitions on the drive are called Monday Tuesday Wednesday Thursday Saturday
    The existing script is as follows:
    on run
    display dialog "Unmount All Backup Drives?" buttons {"Yes", "No"} default button 1
    set x to button returned of result
    if x is "Yes" then tell application "Finder" to eject "Monday"
    end run

    This relates to another (current) thread in AppleScript discussions.
    Your script works with Panther as that operating system allows INTERNAL drives to be "ejected" (and, if you eject one volume on a partitioned drive, all the volumes on that drive are ejected -- this explains why ejecting "Monday" actually ejected Monday through Friday).
    With Tiger, you would find that your script works exactly as expected with EXTERNAL drives, but INTERNAL drives need a different approach.
    To get behavior exactly as you had before, try this script:
    --BEGINNING
    display dialog "Unmount All Backup Drives?" buttons {"Yes", "No"} default button 1
    set x to button returned of result
    if x is "Yes" then set driveName to "Monday"
    set driveInfo to do shell script "diskutil list | grep \"" & driveName & "\""
    set driveID to last word of driveInfo
    do shell script "diskutil unmountDisk " & driveID & ""
    --END
    For reasons that aren't entirely clear to me, this approach, while it works reliably, is very slow -- on my fast machine, the unmount process takes nearly 20 seconds. (Using UNIX directly in Terminal, with the same command, is very quick.) (In the AS, the delay occurs in second "do shell script.")
    Another puzzle that has cropped up is described in the related thread "Applescript to Mount/Unmount a Disk . . ." (current). While the above approach works for Justin Surpless, it often prompts for a password -- unacceptable in his application. I've not seen this on my PPC (and I tried 10.4.7, which he's using); his may be an Intel Mac, if that could be the difference.

  • Adobe - what is wrong with you?

    Do you need to go that cheap with your testing?  One minute after installing the 10.3 update on a CLEAN win7x64 build  using IE9 standard (no extras) and any site using flash, especially forums with Google ads slow to a crawl, especially editing a post or entering any text is an exercise of extreme frustration.  It is silly to have to wait 3 minutes for your cursor to appear to enter one character in a post.
    This means, you guys didn't bother to do the most basic testing with 10.3 - and with a company your size I have to ask, "What is wrong with you?"  Not only is this lazy and incompetant, but evebn worse you have somewhat of a monopoly monopoly on this type of content.  There is simply no excuse for this and this isn't the first time you've screwed the pooch as of late.  It was super fun fixing your security loopholes that delivered trojans right through computer systems via your flash ads.
    If you can't manage this application, if you can't perform the most basic net tests - then sell this business segment off to someone more competant... hopefully someone who's not so inconsiderate as to fill our computer's with unecessary bloat (cue Adobe Reader).
    Sorry for ranting.
    Message was edited by: jpinard7  - thank you to the tech answering questions here (Mr. Campbell)

    Hi,
    I'm sorry that you're encountering problems.  From your edit I'm guessing you've seen this post, but if you haven't please review it for details and a few workarounds.
    I know this is frustrating, and we do apologize.  We do testing on many systems, but for whatever reason we missed this issue with Intel HD Graphics GPU's.  If you're running into problems with another display adapter please let me know so we can investigate further.
    Thanks,
    Chris

  • What is wrong with OSX on the MacBook Pro and when will it be fixed?

    When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.

    I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
    I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
    It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
    So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
    I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available.

  • I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

    I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

    Perhaps the PDF files are corrupted.
    Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
    Now you can try opening the PDF's from the file menu and see what's going on.
    If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
    Download the free ClamXav and run a scan on the possibly infected folder.

  • What is wrong with my monitor photo attached

    i just got a macbook pro yesterday and when i was using all of a sudden this came on the screen, and i just restarted it and it was gone. today i turn it on and this happens again. what is wrong with it.

    I view the forum on a 30" display. But no matter how wide the window is, your picture shows with the right side truncated and a scroll bar. It never occurred to me that I needed to scroll to the right to see what the problem was.
    You have a serious Hardware problem, and the graphics hardware is not a separately-replaceable card.
    Take it back. If within the 14-day period, they will just trade for a new one. If after that, they will sometimes just trade for a new one, but THEY make the decision of whether to repair instead.
    If they exchange, the genius Bar can help you copy your files, but it is always better if you have your own Backups before you go.

  • What's wrong with networking since Leopard?

    Hi,
    I'm with Mac since years. I was a PC User once and spent hours with all kinds of network troubles. What convinced me with Mac right in the beginning was easy networking: It just worked!
    But since Leopard things got worse: I have several MBP's, iMacs, Airport Extreme's and Airport Express's at different places which I installed, and I face the same problems at EVERY place:
    - I can't connect to AExtreme for several reasons: timeout, security incompatibility, ...
    - Sometimes only two Macs are allowed to connect to one AExtreme
    - Airport doesn't find Aiport or any other networks for minutes
    - After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
    - Aiport Extreme crashes (yellow blinking)
    - connection loss (even when AExtreme is very close)
    Now I know about networking, about configuration, I've done this for years. Whatever I do, problems disappear and appear again, at different times, at different places with different hardware.
    What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.

    What's wrong with networking since Leopard?
    on my network and many i have setup there have been no problems with leopard. However there are always teething problems with new operating systems. Thankfully with leopard only a tiny percentage of users experience technical difficulties.
    can't connect to AExtreme for several reasons: timeout, security incompatibility,
    is it set to use WPA/WPA2
    Airport doesn't find Aiport or any other networks for minutes
    sometimes my macbook pro takes a while to show up any networks if there are lots in the area this is because it is scanning them all.
    After connecting to the router, can't get an IP (self-assigned IP only) - other PCs get an IP.
    What kind of router are you using? What happens if you powercycle the router?
    # Aiport Extreme crashes (yellow blinking)
    # connection loss (even when AExtreme is very close)
    Have you tried resetting your AE to default. reinstalling its firmware or checking for a firmware update?
    Have you tried changing hte wireless channel your networ is broadcasting on?
    What is wrong with Leopard? Such problems remind me of times with Windows98 and stuff like that.
    Did you upgrade install your leopard installation or did you do clean (erase) installations?
    Have you tried created new network locations?

Maybe you are looking for