What is wrong with the phone?
I have bought a telephone 4s which is unlocked. I use it in Norway on N Telenor . But is no network for colling just 3G Internet. My phone imei . What is wrong whith the phone?
<Personal Information Edited by Host>
They say is everything is ok with SIM card. Then should be wrong with the phone.
Similar Messages
-
I have a recently acquired iphone 4s and despite having good hearing and the volume up to max can barely hear who ever I am speaking to. WHat is wrong with the phone?
The plastic cover was removed before I left the store and I have moved the volume up and down during, before and after phone calls. Have tried it in protective case and out of it. Impossible to hear calls unless phone is on speaker. There seems to be lots of comments re this. Is it a significant flaw? Can I fix it?
-
A friend of mine has an iPhone4 (not 4s) and she has been dropping it when she was drunk. She also lost it for nearly a week and it got handed back to her, luckily. She blocked the phone after she lost it so that other's couldn't use her contract (which is paid by her father). When she received the phone back, she asked O2 to unblock it an they gave her a new sim card and asked her to wait 24 hours. It started working again, for about a day, where she could receive and send texts/calls and Internet - the lot! But after that day, she can no longer get any signal on her phone to send or receive calls or texts. We have tried putting the sim card in another phone to see if that was the problem, but it worked fine with full signal, so we're guessing that O2 aren't the problem. I'm guessing that it is the phone but I'm not sure whether it's a hardware issue or software. We've recently installed the new iOS5 today and it still doesn't work correctly. Do you think that some hardware needs to be replaced? I was wondering if anyone knew if the phone signal and 3G signal run on the same antena or different ones in the 4S?
Thank you for your time and help in advance. Any help/knowledge will be much appreatiated.oh my god, i can't believe i am having the exact same situation as yours. i lost my phone for about 2 weeks and got it back. when it was lost I asked O2 to block it and later I asked them to unblock it after I got my phone back. My internet seems to be working fine, but I cant receive or make calls. I went to apple store to tell them about that, they did a factory setting, but still can't get it working and later told me that its not the phone's fault but O2's fault because I could see the O2 on top, with no any bars and she assumed that i would not have been able to see the O2 written on top if it wasn't O2 fault. I told them that I can use the internet from O2 however, but in reply she asked me to show the internet (i still wonder what she meant by that), I tried to explain that the internet is from my data plan, but no... she insisted me on showing the internet, i wonder what exactly did she wanted to prove by that. Or maybe she was in a hurry to get home, because it was almost at the end of the day. Anyway I have changed my sim and it seems to be working fine on another phone, but its the same problem in my iphone 4. I haven't been able to use my phone for more than a month now and its really frustating. I have booked another appointment with apple day after tomorrow, just hoping for the best now
-
Iphone 5 screen popped out and its bending , what could be the problem and what should i do?
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these. -
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?
I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).
-
In October I dropped my phone down the toilet, this was sent off to be fixed which cost me £100. After it was fixed I had no problems with it at all. In December I managed to drop my phone on the pavement and the screen smashed, apart from a crack in the corner the phone was otherwise fine and I had no issues with it. I decided that it would be time to get the screen fixed, so the other week I gave it to a friend of a friend to fix it. Now my phone looks brand new, but it doesn't work. The screen on my phone constantly shakes and it is very distracting and makes my phone impossible to use. Another issue is that I can see small red lines all over the screen. The camera is the worst effected, and shakes violently when I attempt to use it. The man who fixed it recommended that I back up everything on my phone and reset it, which I have just done. Unfortunately it will no longer turn on, even though I know it has full charge. It will vibrate and make sounds whilst on charge but will not turn on.
Does anybody know what is wrong with my phone, and what I can do to atleast turn it on. The man can't look at it until the weekend, but I desperately need my phone to work asap.
Thanks.not sure who you sent it off the first time to have your phone fixed, but looks like your friend's friend, might have damage your phone when they repaired the screen.
Send it back to them and have them fix it.
Since you took it to a 3rd party to fix your phone, Apple won't touch it.
YOu might be lucky and be able to buy an out of warranty 4S at the Apple store. -
All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?
I still have access. Must be your phone or your internet connection.
-
I have just deleted an app call Wattpad and I want to download it again but it always says that I need to retry downloading it. I have tried restart a few times but nothing seems to happen. What's wrong with my phone? If I reset my phone will my pictures
Hello there, SamanthaYikwai.
The following Knowledge Base article offers up some basic steps to try for reinstalling an app:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open.
http://support.apple.com/kb/ts1702
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
If the issue persists, then you may want to try and sync the application to your iOS device using your computer by following the information in this article, under the section "Download previous purchases on Mac or PC":
Download past purchases
http://support.apple.com/kb/HT2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?
Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh -
what's wrong with the itunes store UAE? i couldnt buy my favorite songs and movies because there's no "music" and "movies" category. please do something... thanks!
You are not addressing Apple here...
This is a User to User forum...
iTunes Store: Which types of items can I buy in my country? -
What's wrong with the fan of my 15 inch retina mbp?
what's wrong with the fan of my 15 inch retina mbp,when i play a big game like Batman ,the fans are so quiet and keep around 2000rpm,but the temperature of cpu is up to 80 degrees.(by the way, i have reseted the SMC for many times,but it doesn't work)
80 degrees F or 80 degrees C?
-
public void run()
try
{ for(;;)
mgr = (RTPManager)RTPManager.newInstance();
mgr.addSessionListener(this);
mgr.addReceiveStreamListener(this);
try{ /*****port1 = port2 = 29261, which port is only used in here
localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
destAddr = new SessionAddress(ipAddr, port2);
}catch(Exception e)
System.out.println(e + " 4");
try{
mgr.initialize(localAddr);
}catch(Exception e)
System.out.println(e + " 5");
//set buffer
bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
if (bc != null)
bc.setBufferLength(20);
try{
mgr.addTarget(destAddr);
}catch(Exception e)
System.out.println(e + " 2");
catch(Exception e)
System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly. -
We are trying to create a proxy from the following wsdl file and getting an error message: illegal syntax: API:Parameter BINDING has initial value
The webservice that we are trying to consume is from TIBCO .
Can someone please help me to find out what's wrong with the wsdl.
<?xml version = "1.0" encoding = "UTF-8"?>
<!--Created by TIBCO WSDL-->
<wsdl:definitions name = "Untitled" targetNamespace = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.example.com/1268018884234/OperationImpl" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:xs = "http://www.w3.org/2001/XMLSchema">
<wsdl:types/>
<wsdl:service name = "TIBCO__ABAP">
<wsdl:port binding = "tns:SOAPEventSourceBinding" name = "SOAPEventSource">
<soap:address location = "http://192.168.9.58:10001/TIBCO_ABAP"/>
</wsdl:port>
</wsdl:service>
<wsdl:portType name = "PortType">
<wsdl:operation name = "Operation">
<wsdl:input message = "tns:Input"/>
<wsdl:output message = "tns:Output"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name = "SOAPEventSourceBinding" type = "tns:PortType">
<soap:binding style = "document" transport = "http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name = "Operation">
<soap:operation soapAction = "http://192.168.9.58:10001/TIBCO_ABAP" style = "document"/>
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:message name = "Input">
<wsdl:part name = "Param1" type = "xs:int"/>
<wsdl:part name = "Param2" type = "xs:int"/>
</wsdl:message>
<wsdl:message name = "Output">
<wsdl:part name = "Result" type = "xs:int"/>
</wsdl:message>
</wsdl:definitions>Léon Hoeneveld's response works for me. You will need to download a tool that allows you to edit the WSDL and reorder the values.
I've used a freeware tool like notepad++ collapsed all the levels and opened up the <wsdl:definitions xmlns:wsdl... segment and reordered the subgroups beneath it accordingly.
1. types
2. message
3. portType
4. binding
5. service
Thanks again Léon! -
execute me ~what's wrong with the server? I can‘t use the command nohup any longer.Can somebody help me?
root@shhis1new # nohup
Segmentation Fault (core dumped)
root@shhis1new # nohup ls
Segmentation Fault (core dumped)
root@shhis1new # nohup /opt/SUNWexplo/bin/explorer -w all &
[1] 6871
root@shhis1new #
[1]+ Segmentation Fault (core dumped) nohup /opt/SUNWexplo/bin/explorer -w all
root@shhis1new # uname -a
SunOS shhis1new 5.9 Generic_122300-19 sun4u sparc SUNW,Netra-T12
System Configuration: Sun Microsystems sun4u Sun Fire E2900
System clock frequency: 150 MHZ
Memory size: 49152 Megabytes
Best Regards
<email address removed by moderator>
Edited by: 884082 on 2011-11-22 下午10:00Moderator Action:
You email address has been removed from your post.
You wouldn't want bad people to send you spam messages for the rest of your life, eh?
Moderator Advice:
If this is the same E2900 that you have mentioned in every one of your other forum posts, then it would seem you need to contact Technical Support and open a proper support request. These forums are NOT techsupport and that system seems so poorly configured that it needs deep analysis. Such investigation cannot be done by using an online forum.
The immediate solution is to log on to the SC of that box and power it down, then boot it back up. At least it will be running after that.
Maybe you are looking for
-
Not to print last page in Script
Hi Experts, I am having a Z-script for tcode F110. There i don't want to print 'last' Page in the form. The program which i s calling driver program is a standard sap include RFFORI06 calling 'Last ' page with window 'Summary'. As its a standard incl
-
How do I make a submit button work on a mobile oriented page?
How do I make a submit button work on a mobile oriented page? I have the .html file and the .data file (and one other kind), but it just spins and spins and spins when I try to send the form in (for an absence). I'd like it to work on all devices.
-
My Time Capsule is giving me a "read only error message"
I have been trying to work through this issue for two days to no avail. I've got a 500 gb capsule. I Tried to set up a call with Apple but they just left me on hold and then hung up. I just want my time capsule to get back up and running.
-
Can I download photos from my husbands new iPad mini to my Mac? Do I just sync it?
Can I download or sync photo's from my husband's iPad mini to my Mac?
-
We have a requirement where we need to assign a personnel no. to a particular service. We are doing this thru ML10. In the HR Master Data I have maintained the basic infotypes and also IT0315. When we try to assign a personnel No. to a particular ser