What is wrong with the screen stays black
what is wrong with the iPod if the screen stays black and won't turn on, but is fully charged.
Could be one of the two:
1. Device sleep - Press and hold power button for six seconds and see if that wakes up the unit
2. Device freeze - press and hold the power and home button for few seconds till Apple logo is seen.
Hope this helps!
Similar Messages
-
What is Wrong With the Screen on My New X1CT?
Guys, what the hell is wrong with the screen on my new (an hour ago) X1CT? Its like there is a matte cover over the screen. I read about the screendoor and I don't think this is that. Its like the colors are all off, white is grey and grey is white. There are weird lines and shimmering on the screen.
It seems to be okay on the W8 start page but there is no white there, just the metro tiles. I have checked all settings and there is nothing I can do with any settings.
In the pic below see how the whites and greys are even reversed on the same webpage?
I just took it out of the box and started to set it up. I'm not sure what is going on but it certainly is not right. I doubgt i can use it like this.
Thanks in advanced for any ideas.
EJ
Link to image
Moderator comment: Image(s) >50KB converted to link(s). Community Rules.They are sending out a tech with a new screen and cable on Monday am. If that doesn't fix it then its going back. I've decided that its somthing physical as the screen just cannot make white. The google homepage is grey not white. There is banding and artifacts all over and even screen memory when I close windows and such. There is no way its supposed to be like this.
-
I purchased a tv show in itunes. When I try and play it, the screen stays black but the cursor is moving. Any thoughts?
If you are seeing the "Connect to iTunes" logo, then your device is in Recovery Mode, and you will need to restore it:
If you can't update or restore your iOS device
iOS: Back up and restore your iOS device with iCloud or iTunes
Cheers,
GB -
The screen stays black, I do not know what cause it?
My Macbook in the last 3 days when I turn on by power button or restart the screen stays black. If I get lucky by using cmd+ option+ shift+ power button it comes up. Any suggestion what is going on? If it's on I have not problems using my computer.
http://www.ifixit.com/Answers/View/54820/What+is+the+lock+symbol+with+a+circle-a rrow+around+it
-
What is wrong with the edit biling info screen. it cannot verify my address. i triple check my address info
and it is correct.Use the email form > Apple - Support - iTunes Store - Contact Us
-
My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?
For some reason its firmware seems to have been corrupted. Read:
About the Firmware Restoration CD (Intel-based Macs)
iMac (Mid 2007) and later models: About startup tones -
i locked my ipod before i went to bed a few nights ago and in the morning when i woke up i tried to turn it on but the screen stayed black so i put it on the charger to see if it was dead or not but it wasnt. i left it on the charger for an hour or two thinking it will turn on but nothing happened and i just tired to connect to itunes and nothing happened.
Hi,
Try a Reset of the Phone... You will Not Lose Any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DOcarter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software. -
IMac starts with fan, screen stays black
When attempting to start my iMac G5 (Ambient Light Sensor), fans come on but screen stays black. A couple minutes later, the fans rev up and run very quickly and loudly. This started happening when:
1. One day the screen showed a green question mark with a message indicating that the computer needed to be restarted in a box
2. Green lines were all across the screen
3. I forced it to shut down by holding down the power button
4. When I attempted to start it back up the fans started but the screen stayed black
5. After a couple of minutes, the fans revved up
This has been happening ever since. One time the computer started to the desktop but everything was frozen. I have reset the PMU, checked the diagnostic LEDs, reset the PRAM-basically everything suggested. Can anyone help? Thanks!Try the suggestions mentioned in the following Articles:
http://docs.info.apple.com/article.html?artnum=301283 Troubleshooting when there's no picture on the display
http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Strongly recommend that you update to OS 10.4.11. Your system info confirms you are still using the basic Tiger OS. -
What is wrong with the Photoshop CC 2014 blur tool?
What is wrong with the Photoshop CC 2014 blur tool? It only blurs pixels of initial contact with the tool. It does not blur any pixels that are swiped by the tool as you drag it across the screen. Photoshop CS6 blur tool works just fine. Togeling between two versions of Photoshop to get the work done is a drag!
all my settings both in the Options Bar and the Brush Panel are the same whether in CS6, CC, or CC 2014.
Let’s see the screenshots.
Don't know how to post a screen shot
Use the camera icon. -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
I'm having trouble using the safari. It won't open the screen stays black
I'm having trouble with the safari it won't open the screen stays black also apps won't open it just kicks me out
Try this:
Settings>Safari>Clear History, Cookies and Data -
After my Macbook goes into sleep mode it sometimes won't wake. The keypad lights up but the screen stays black. This problem has only occured after updating to OSX 10.7.2.
All I can do is switch off and restart. Then any programs I have not 'quit' all open.OK, I have a fix.
After spending about an hour online with Apple Care without success, I did a reinstall of the Lion OS. It fixed the problem. I was concerned that I would lose data or settings, but the reinstall was seemless and everything was the way it was before the reinstall except that the "black screen on wake" problem was fixed.
I started the reinstall before I went to bed and it was waiting for me the next morning.
Here is a link to the page on how to do the reinstall:
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
Hope this helps. -
hello there dear community,
i have been a great fan of my imac and macbook eversince i first got them. but recently - probably since maverick - i am experiencing a series of problems with my 2010 27" imac. let me be more precise: eversince i got maverick, my imac keeps asking me to update every other day. usually i'm doing this or waiting for a couple of days. it's been exactly three times now that when my imac asked me to update and i postponed it that troubles occured. every single time i am not able to switch from sleep mode into the regular one. the screen stays black and the cursor is visible (and moveable). also i can clearly hear that the computer is on and working. the screen is black, but not in a mat kind of black but as if there was light behind it (i.e. the screen is switched on).
when this happened first, i called the apple support and we tried a lot of things and spoke for more than an hour. the only solution that worked out was pulling the plug, waiting, putting it back, restart the computer with cmd+r pressed and then restore the system from a backup that i had saved on an external drive. this of course takes time, usually up to four hours, but yes - it works. and i am very glad that there is a solution at all to this mess - but it's very idle.
now my question: there must be another way? or even better: how do i avoid that my imac falls to a sleep from which it can't really awake?
thank you for your patience and thank you for your help!
cheersBlank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser -
When I start up my compute, I can hear it starting up but the screen stays black. Has anyone else had this problem and found a fix?
If you press the caps lock key does it light up? If it does then this indicates that your system is booting but the display is either not recognized, is not displaying any video, or the display is displaying video but the backlight system is not lighting up. As long as you've tried turning up the brightness then there is not much you can do other than take it in for a diagnosis. If you have a very bright flashlight you can turn on the iMac and then shine the flashlight onto various areas of the iMac display to see if you can see any faint images on the display. If you do then this indicates that the display is displaying the image, but the backlight is not turning on for some reason. It doesn't change the outcome, but at least you can assist the technician who is troubleshooting your iMac.
Please let us know what you find out.
Maybe you are looking for
-
Problem with HP Color LaserJet 2840
Hey guys, first post here woot woot haha Now to business I have a macbook with osx 10.4.11, and an HP Color LaserJet 2840. I can't get it to print through USB. This guy on the HP forum had the exact same problem http://forums13.itrc.hp.com/service/fo
-
My desktop has 2973 bookmarks in wonderfully sorted, categorized folders. Apparently the ONLY way to get this hierarchy into my tablet to use Firefox Android is with Sync. I've tried it three times. Each time, it's make a wonderful Desktop Bookmarks
-
Image field - cannot set h and w attribute of all node elements
Hi guys, We currently need to show some photos on our .pdf forms when the form is generated. The number of pictures are unknown at runtime and need to be determined dynamically. This is not the problem - we figgured this out by using base64 encodin
-
Sort by number of images in a stack
I use stacks a great deal, we have the ability to sort by rating, by picks, by date, etc etc, a very useful way would be to sort by number in stack. I stack images and then batch process so say a selection of 27 images arranged in stacks of 3, follow
-
Trying to use sql_context for multithreading.
I'm trying to use an sql_context to get some multi-threaded code to work properly. sql_context ctx1, ctx2; EXEC SQL CONTEXT ALLOCATE :ctx1; EXEC SQL CONTEXT ALLOCATE :ctx2; /* Create the DB Alert to wait for table updates */