What is your all time 3 favorite Movie ? Why ?

Let me list mine.
1. Cast Away - How the loneliness felt.
2. Pursuit of happyness - Father's Love & Passion behind the job.
3. Enthiran - Only because of Rajini
What is yours ?

I had this Idea to ask something about movies because sometimes I couldn't find some movie to watch. I've seen many movies and its hard to find some quality movie now but thanks Suman Thangadurai for starting this thread And I'd like to add one thing just for fun that we can share 1 worst movie we've seen ever. Lets see which movie we get as worst
For me its hard to decide best three movies. When it comes to my favorite movie, I've a long list in my mind and I can't decide which three are on top of that list. Let me try to share three names only.
Kingdom of Heaven is the movie I've seen many times. I liked the dialogues and direction. The way director showed how they used catapult to conquered Jerusalem is amazing. This is based on a real fight Salahudin fought. Troy, 300, Brave Heart and Last Sumari are also from the same genre which I liked most.
Bourne Film Series is a sequel of 4 movies. I like this series because it shows how to use technology and how to think one step ahead of your opponents I like spy movies because it is kind of self training that how we could escape after doing something which we are not supposed to do
Mr and Mrs Smith is a comedy romantic movie and I liked it because of the acting by Brad Pitt and Angelina and both are my all time favorite in Hollywood.
There is a long list that I'd like to share but since you asked for thee so I can only name three movies here. Though I've named more but I think its not violating the rule
My worst experience was to watch SAW series. I don't know why I've seen all parts of it but I didn't like that at all.
Thank$

Similar Messages

  • PT880----Possible cold boot issue-----What are YOUR boot times??

    I may have an issue with this board that I hadn't really noticed since I've been so heavy into the max overclock I could get.
    My post and then boot time is strange and annoying-----and sometimes I have to just shut off and turn on-----to actually complete the process.  It just seems WAY too long!  But maybe this is normal for the chipset.
    Turn on>>>>>to POST beep = 40 seconds----D-Bracket shows code of "Memory Detection" during this time.....(----This is the time that seems way out of whack)----most boards I've ever had go from turn on>>>>to Post beep VERY quickly.
    From POST beep>>>>>to "Welcome" screen in BOOT = another 20 seconds
    Completion of BOOT = another 10 seconds-----not so much worried about this one as I would think it would be Windows dependent and what additional software was loaded.
    This total process seems remarkably slow----and again----sometimes-----I NEVER get the post beep (The D-Bracket code is stuck in Memory Detection) and I have to turn the machine off and start again.
    What are you guys' times with your PT880????  I tried two different types of RAM---no difference----changing RAM DIMM slots-----no difference----changing RAM timings and voltages----no difference-----I also ran Memtest on both sets of RAM (passed), reflashed Bios----cleared CMOS, and reset NVRAM----no change.
    Any ideas???  Beta Bios 1.53 issue??
    John

    Quote
    Originally posted by markt435
    Well I finally got my system fixed.  Hmmm I have about a 20 sec start up.  My proc is overclocked to 3.4Ghz as well.  I would try reseating memory or clearing the BIOS.  Or putting different sticks of memory in if you have any laying around.
    Already done-----See last paragraph of my post....

  • What is your boot time of your Mac?

    I bought a brand new Mac mini (2.26 GHz model with Snow Leopard). I think my system's boot time takes long (from pushing power button to the Log In screen). I see gray(white) blank screen for about 40 secs after turning on Mac. Then Apple logo shows up for another 20 secs. Then Log In window shows up.
    I remember that Mac mini with Leopard booted faster than this one. At least I saw Apple Logo right after turning on Mac...
    Do you think 1 minute booting time is pretty normal? How long it takes to boot your Mac?
    Thank you!
    Stephen

    OK so I started up from my install disk (I have an older Snow Leopard family pack disk but decided to use the one that came with my new Mini).
    I erased my hard drive, then installed SL, then updated everything via Software Update, then installed all my applications and stuff, then restarted a couple of times, repaired permissions, and restarted again.
    Result; it takes maybe 4 seconds to get to the apple, then another 33 to get to the login screen.
    So I couldn't get it to 20 seconds, but it was definitely improved a whole lot, and more in line with my previous machines. Seems like the install it shipped with had something not so good about it.

  • Concerns ALL Time Machine Users. HOW TO MOVE Time Machine backups. Help !

    Concerns ALL Time Machine Users :
    MOVE (or COPY) Time Machine backups from a "x"To Disk to an "y"To greater disk.
    Hello and thank you all for reading me,
    First, excuse me if I make language errors (I'm French).
    Secundo, I don't know if you'll find something interesting for you
    in what I write about Time Machine and my own problems,
    but there's a possibility also that YOU could perhaps help me.
    I'm talking about Time Machine and his **** Backups.backupdb folder,
    containing "*Name of your Mac*" folder,
    this folder containing Time Machine backups, format : YYYY-MM-DD-HHMMSS
    Time Machine doesn't recognize the backups it made *IF YOU MOVE THEM*.
    I have perhaps a solution in this message.
    You'll see below what kind of problem I (and you could) have.
    Since 12/01/10, an Apple Adviser Level Two (and me)
    are trying to understand how to move backups from TM1To Disk to, let's say, a bigger one.
    My case is TM1,5To.
    *Purpose :* Move 19 backups from Time Machine X disk to Time Machine Y disk.
    Delete TMX disk Time Machine backups after that.
    Make TMY disk the current used Time Machine Disk.
    I don't remember exactly what we did before
    (we even created a "root" account with password (dangerous to do),
    but it didn't solve the problem),
    but we finally copied :
    TM1To > Backups.backupdb > *MacBook Pro* folder (containing 19 backups) into :
    TM1,5To > Backups.backupdb folder.
    The Copy application announced *16 hours !* (without antivirus, to remove absolutely).
    So I said goodbye and thank you to my Apple Adviser. After *8 hours*, Copy failed.
    BUT it had succeeded to copy *4 backups ONLY* (why ?) in TM1,5To.
    I immediately verified and checked each of these with Get Info.
    They had EXACTLY the same size (Byte to Byte) as in TM1To.
    ➔ BUT HERE IS MY OBSERVATION :
    After designing TM1,5To as Time Machine Disk, I ordered it to Backup (now).
    And what did Time Machine do in TM1,5To > Backups.backupdb ?
    It created a *NEW folder*, named *MacBook Pro 2* !
    ➔ *I HAVE NO ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro* (4 backups copied from TM1To, remember) ;
    ➔ while I still *HAVE ACCESS* to TM1To > Backups.backupdb > *MacBook Pro* (19 backups) ;
    ➔ *AND I HAVE ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro 2*,
    where Time Machine makes actually his backups.
    *NOTE :* If you *change the name* of your computer,
    Time Machine *changes automatically the name* of the folder who is in Backups.backupdb folder.
    ➔ ① I have *never seen* such protections (Sharing and Permissions).
    You are not allowed to do anything. I've tried to change permissions,
    first : "R+W", after that : "Make (Me) the owner", I can tell you : DON'T DO IT !
    ➔ ② It's impossible to install an OS on a Time Machine disk
    (I thought it would allow better permissions).
    OS Installer detects the existence of a Backups.backupdb folder
    and refuses to install on this disk or partition.
    I have now the bad intent to install minimal OS X
    1) after deleting (how ?) this folder (but not its contents, how to move it ?)
    and 2) declare *after that* the disk as Time Machine disk.
    ➔ ③ Time Machine doesn't backup OTHER Time Machine backups
    (who are in an ancient-not-choosed-for-backups Time Machine disk) NOR backups this disk
    (detects, once again, the existence of a Backups.backupdb folder).
    AND you can't *absolutely not remove backups from the folder the're in*
    (for me, *MacBook Pro* or *MacBook Pro 2*).
    ➔ ④ I didn't have time to do it, but I think there would perhaps be a solution
    in restoring backups in partitions specially created to receive them (having the same name,
    that sort of thing) and then re-backup these partitions (vicious and complicated).
    There is a function on Mac OS X Install DVD : start with it, and then (do not install)
    choose "*restore from Time Machine backup*" from the menu bar (it's called "Utilities", I believe).
    ➔ ⑤ I *absolutely don't understand* what follows :
    — If I add (in my TM1To disk) the bytes of the 19 backups
    in Backups.backupdb > *MacBook Pro* folder, I obtain about *1,8 To*.
    — It's impossible (and not french).
    — When I check the size used with Disk Utility (NOT with Get Info),
    I find a correct (?) size : *about 750 Go*.
    — What are Time Machine backups made of ?
    It can't be aliases (because of their size, and because *aliases suppose originals,
    and where could they be ?*), or am I wrong and becoming crazy ?
    ➔ ⑥ If you refer to the numbers shown at the end of this text (*4 backups*),
    you'll see I could *delete duplicate elements* inside these 4 backups,
    to win space (but *what kind* of space *if I delete aliases* ?).
    Back-In-Time (see below) says he does it.
    BUT is it really the OLDEST items I have to destroy (see ⑤),
    when I don't know with what kind of ARTEFACT I'm acting ?
    What does Time Machine delete to create more backup space ?
    Is it REALLY the OLDEST backups it treats, or duplicates, OR ?
    *What you can do :*
    Find and go to Tri-Edre.fr or Tri-Edre.com/fr site (it's a french company
    that creates small Mac applications since fifteen years at least,
    I think I already bought them several programs in 1990) ;
    Their program *Back-In-Time 1.4.4* is free (Trial) and complete to download (with PDF docs too).
    It is *ENTIRELY DEDICATED* to Time Machine and *things you can't do* with.
    Price is about 30 €, I think it's worth.
    The TRIAL version you will obtain can only work on the LAST Time Machine backup,
    but you will see what's featured *AND :*
    You will ACCESS to ANY Time Machine backup you want
    (It has to be the last of a serie of backups, but the serie you want.
    I've bought the application and own an activation key, but you understand I can't give it to you
    (it would not be ethic) and anyway you would be obliged to disconnect AirPort, Ethernet etc.
    •➔ I have bought the application because I thought (it's said in PDF FAQs) I could IN THE END move Time Machine backup files, but it cannot, (I'm afraid).
    *BUT ANY ACCESS PROBLEM IS SOLVED.*
    •➔ Back-In-Time 1.4.4 can *delete :* duplicate backups, complete backups,
    or duplicate items inside one or several Time Machine backups,
    things that I believe impossible with Time Machine itself
    (I've seen it offers to delete ALL occurences of an item) ;
    •➔ The application can also restore anything you want, where you want
    (but I think Time Machine does it too ?)
    •➔ Believe it or not, but since I've bought it on 15/01,
    I've only worked about 2 hours (no, much more) on it
    and didn't make sufficient progresses (enhancements ?)
    to talk of it with sufficient experience (I'm a bad guy, don't you think ?)
    •➔ Tri-Edre offers on-line support, e-mail support (and so on),
    and I EVEN didn't manage to join them, because I did many other things,
    and also somewhat have been disgusted *not to be able to move* or copy
    *(accessible by Time Machine after that)* backups,
    and I also didn't succeed (*another Time Machine inconvenient*) to DESTROY an ".inProgress"
    Time Machine (package) which doesn't work anymore (several interruptions while active),
    date (and name) 2010-01-27-164345.inProgress, but is used (*with failure results*)
    by Time Machine (it's turned off till I find how to destroy its **** ".inProgress" package.
    •➔ I've asked my Apple Adviser Level 2 to wait for news from me
    before working himself on the problem, and I think I will send him this message
    to prove I haven't forgotten him.
    •➔ I'll send it to Tri-Edre too, in the same move.
    I hope those remarks to be useful for somebody, tell me if it has helped.
    I will also publish this in any Time Machine topics I find here, and in MacRumors site too.
    As you can see, I need help too … Does anybody have an idea ?
    Perhaps if I used a specific Copy software, it could work ?
    You'll see below an example of some time I've spent to study my problem
    (you will think I'm crazy).
    With my kind regards, and good luck if you have other Time Machine problems !
    Olivier Herrbach
    <Edited by Host>
    Le but du jeu est de transférer toutes les sauvegardes Time Machine
    d'un volume/partition que nous appelerons "1 To"
    sur un volume/partition que nous appelerons "1,5 To".
    *Je rappelle que les 4 sauvegardes effectuées par Time Machine sur le 1 To
    n'ont pas été reconnues comme siennes par Time Machine sur le 1,5 To,
    bien que strictement identiques en taille après leur copie.
    J'ai remarqué dans Back-In-Time des fichiers invisibles (tels que "TimeMachine.log"
    ou quelque chose de genre), et je soupçonne fort qu'ils n'ont pas été copiés et que Time Machine,
    ne les trouvant pas dans le 1,5 To, a ignoré à cause de leur absence les 4 sauvegardes décrites ici.*
    *Sauvegardes effectuées par Time Machine sur 1 To :*
    Path : MacBook Pro > Volumes > 1 To > Backups.backupdb > MacBook Pro
    MacBook Pro contient 19 items (dont un alias appelé "Latest") :
    1°) 2010-01-02-045758 Size : 913.207 B for 41.888 items comprenant :
    • Hitachi 1 To Size : 907.664 B for 41.887 items 7 folders
    Différence avec 1°) = - 5.543 B - 1 item (1 folder)
    2°) 2010-01-03-001957 Size : 982.211.325 B for 67.490 items comprenant :
    • Hitachi 1 To Size : 901.516 B for 41.886 items 6 folders
    Différence avec 1°) = - 6.148 B - 1 item - 1 folder
    • Samsung 500 Go Size : 981.302.510 B for 25.602 items 4 folders
    Total • + • = Size : 982.204.026 B for 67.488 items
    Différence avec 2°) = -7.209 B - 2 items (2 folders)
    — *Supprimer • Hitachi 1 To* dans 2010-01-03-001957. Comparer les dossiers.
    3°) 2010-01-04-222709 Size : 5.241.032.819 B for 26.509 items comprenant :
    • Samsung 500 Go Size : 5.187.330.874 B for 19.392 items 8 folders
    Différence avec 2°) = + 4.206.028.364 B - 6.210 items + 4 folders
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • = Size : 5.241.023.577 B for 26.507 items
    Différence avec 3°) = - 9.242 B - 2 items (2 folders)
    — *Supprimer Samsung 500 Go* dans 2010-01-03-001957. Comparer les dossiers.
    4°) 2010-01-05-125449 Size : 9.428.705.396 B for 204.915 items comprenant :
    • HD 250 Go Size : 9.374.308.265 B for 181.575 items 7 folders
    • Samsung 500 Go Size : 692.898 B for 16.222 items 8 folders
    Différence avec 3°) = - 5.186.637.976 B - 3.170 items
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • + • = Size : 9.428.693.866 B 204.912 items
    Différence avec 4°) = - 11.530 B - 3 items (3 folders)
    — Supprimer • StartUp Disk dans 2010-01-04-222709. IDENTIQUE.

    Dear James Pond,
    Thank you once again, and, don't be afraid, I will be as short as possible,
    but I need to use your last reply (I've cut all what was already said).
    JP ➔ You can copy an entire set of backups, but you cannot copy part of it successfully. See #18 etc.
    JP ➔ Read this from the first paragraph: "you cannot copy only selected backups,
    or merge two (or more) sets of backups." The structure of the backups simply will not allow it.
    I've read it, and found it regrettable. And I've also read, after that, what were the solutions under Leopard and Snow Leopard, and my conclusion is that it's a *dead end* for me. In short,
    — I can't move (by drag and drop) the 1To's Backups.backupdb folder (containing MacBook Pro, 19 backups, access) to 1,5To, because there exists already the Backups.backupdb folder created by copy on 12/01 with Apple Assistance (containing [MacBook Pro, 4 backups of 19, no access] and [MacBook Pro 2, 15 backups, access]). I don't even know if it could be deleted by the copy (and I don't wanna do that anyway) ;
    — I can't rename (and what for, I already forgot it) any Backups.backupdb folder nor delete it ;
    — I can't copy any Computer'sName folder (entire set containing backups), being in a Backups.backup.db folder, into another Backups.backupdb folder ;
    — I can't copy any (or all of an entire set) YYYY-MM-DD-HHMMSS backup(s), being in a Computer'sName folder, into another Computer'sName folder (even if it would be empty).
    — Saying NONE in Time Machine Preferences and putting it to OFF is simply no use.
    All is said. What I can try to do is :
    — Delete (not with Finder, but with Back-In-Time) all duplicate things I find in all backups and also entire duplicate backups (I have full access to all with the software) ;
    — Restore each of the reduced-to-minimum backups obtained in specially right-sized partitions wearing the YYYY-MM-DD-HHMMSS name of each restored backup. Time Machine doesn't backup his backups, but will backup these partitions.
    I'm afraid to be actually completely running out of the target, when I read what I write … It's time to go to bed !
    Reminder (OH) : Where did you find these amazing informations ?
    JP➔ Some of it is detailed here: http://www.appleinsider.com/articles/07/10/12/roadto_maco[]sx_leopard_timemachine.html
    ➤ Thank you ;
    JP➔ and here:
    http://arstechnica.com/apple/reviews/2007/10/mac-os-x-10-5.ars/14
    ➤ Thank you too ;
    JP➔ You have to understand the structure. When TM does the first backup, yes, it copies everything.
    On subsequent backups, it copies what's new or changed, but also makes "hard links" (sort of like aliases) to the copies of the things that didn't change. That's how it can only back up a few things each time, but show you a complete "snapshot" of the way your entire system looked at the time of every backup.
    ➤ I'll do my best to understand.
    JP➔ Time Machine deletes backups under two conditions. See the first part of #12 in the Frequently Asked Questions User Tip, also at the top of this forum.
    Under normal circumstances, you should not have to delete any backups. See the rest of #12.
    ➤ I understood why Time Machine didn't delete oldest backups : they were not weeklies ones.
    Reminder (OH) : How can I destroy the (corrupted ?) not working "2010-01-27-164345.inProgress" in 1,5 To, which causes Time Machine to abort any backup of any size I ask ?
    JP➔ Why do you think it's corrupted? TM is designed to "recover" a partial backup.
    ➤ I'll verify that with the little Tools/Apps I discovered in your FAQ User Tip document and downloaded immediately.
    Why didn't Apple tell me anything ? It's my fault, I'm perhaps not clear and not demanding enough more from them.
    JP➔ You cannot install OSX on a disk containing TM backups. That's because they need to be on separate disks.
    Technically, you could put them on separate partitions of the same disk, but that would not be a good idea.
    ➤ I never told you that (there would be no interest at all). I talked about the same location, to see if it would allow me more permissions, but if all works without doing it, it's really no use.
    JP➔ Sorry, I don't know what that means.
    ➤ I'm sorry, I didn't explain : "but if all works" meant : Copy Backups.backupdb, "without doing it" meant : Install OSX.
    ➤ If I install an OSX BEFORE, Time Machine will REFUSE completely to backup on it, it's understood.
    JP➔ Correct. The partition you're running from will not be an option in TM Preferences > Select Disk. That prevents TM from backing-up it's own backups!
    ➤ Would it be so absurd ? Maybe it could resolve my actual problem ?
    I think you are right, but I don't know why. I trust you.
    Reminder (OH) : "I will not bore you again except if I don't find a specific answer to an unknown-never-seen-incredible malfuction."
    JP➔ Don't worry about that -- thats what this forum is for, especially if you're still having problems.
    ➤ It's seems in fact that there is no possible solution, except what I said above and is certainly crazy/out of subject.
    Just try to be as clear and concise as you can.
    And please don't post the same things repeatedly -- it wastes your time and ours, and can confuse other folks.
    ➤ You're absolutely right and I tried to do so this time, and I'm sorry because I see it's still (far) not enough (short).
    Thank you once more. I wish you a good evening and week-end. Here it's 01:40 AM.
    With my kind regards
    Olivier Herrbach
    [email protected]

  • What's your Favorite Movie?

    What's your favorite movie? I always enjoyed when Harrison Ford reminded us all to wear our seat belts when flying an unlicensed refridgerator through an atomic explosion. Great line huh? Something that came to mind during my viewing of Indiana Jones and the Kingdom of the Crystal Skull. I have silly quotes like this for most of my favorite movies I hope you enjoy them...
    The Anime Birdie

    Time for me to weigh in, and like GeraldRose, I have way too many to list, so I will explain why I like them so much!
    Superbad - I also find this to be one of the funniest movies I have ever encountered.  To top it off, I know a dude irl (well from online) who looks totally like McLovin.  Classic.  
    The Changeling  (1980) - Good, older creepy movie.  George C. Scott delivers a sharp performance as a man entangled in a mystery that truly affects his life.  One of the few movies as a kid that scared the dickens out of me, without showing anything really.
    Say Anything - I am a hard core John Cusack fan, and I loved him as Lloyd Dobler in this movie.  It also was my introduction to Lili Taylor, who I came to adore in later roles.  This might seem like a teenage love movie, but it is so much more.  I highly recommend!
    Dogfight - The late River Phoenix and Lili Taylor are a delight in this film.  Set in the 60's Phoenix plays a marine on weekend leave, who is on a mission to find the ugliest date for a contest with his fellow servicemen - a "Dogfight".  He stumbles upon Rose, (Taylor) who is not exactly how he first assesses her.  A bittersweet love story.  
    The Princess Bride - Robin Wright Penn, Mandy Patinkin, Carey Elwes, and Billy Crystal are just a few of the stars in this crowd pleaser.   It follows the story of Buttercup and her love for Westley.  This is not your traditional love story, but full of laughs and action!
    Empire Records - A genuinely guilty pleasure, full of great music and laughs.  Rory Cochranes turn as Lucas is brilliant.  Maxwell Caulfield of Grease 2 makes a delightful turn as a washed up songbird "Rex Manning". It's REX MANNING DAY!!!!  Also, one of my other faves Ethan Embry (then Ethan Randall) makes the role of Mark his own. First thing that I ever saw Seth Green in...he cracks me up. 
    All of the Austin Powers movies, All of the LOTR movies, Every Kevin Smith movie ever made, ESPECIALLY his newest Zach and Miri...well you know the rest. 
    I could go on and on. LOL!
    Dorothy
    Community Connector
    Lover of Movies
    Best Buy® Corporate
    Dorothy|Social Media Supervisor | Best Buy® Corporate
     Private Message

  • I cannot get itunes to play certain tv shows all i get is a black screen and the timer does not move what should i do?

    I am trying to play a season on my computer but it will not play. The timer does not move and all i get is a black screen. Should i just repurchase the season.  the season does play on my ipod.

    http://support.apple.com/kb/ts3694
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • OK, I updated to FCS2 - what happened to all my favorite effects in FCP??

    Yep, my favorites folder in the browser effects tab, which I had full of my carefully crafted transitions etc., is empty. What happened to them?

    Your "Favorites" were part of FCP's preference file. When you installed the later version, preferences were most likely overwritten.
    To guard against this happening with future updates, hard drive crashes, preferences corruptions, etc, create an FCP project named "Favorites." Add a color matte to the Timeline and cut it up into as many pieces as you have Favorite transitions. Add all your Favorite filters to one of the clips. Save the project file.
    After upgrades or any other time you're required to restore your preferences, open the "Favorites" project and drag all of the transitions and filters into the Favorites Bin to restore them.
    If you have previous project files in which you used some of those Favorites, you can re-open those projects and restore them the same way - having a "Favorites" project file with all of them just makes it easier to do.
    -DH

  • What's your favorite MacBook Pro case?

    What’s your favorite 15” MacBook Pro case? I am looking for something small that will safely hold the 15” Macbook Pro and some accessory’s such as a mouse and AC adapter.

    Bag n’ Tag It
    by: Digital Dude
    In today’s world of everything slim and integrated, more techno fanatics and Spartan travelers are embracing the minimalist approach. To that end, I was looking for an alternative to my bulky computer briefcase for travel. So, I ordered the “Buzz” by Tom Bihn.
    Initially, I was a bit skeptical since the price of the Buzz is rather high for a nylon bag in today’s crowded market. Fortunately, the folks at Tom Bihn have an excellent guarantee with great customer service. If you receive the bag, and it’s not what you expected, simply return it without having to request an authorization. Try that with any other bag manufacturer!
    Exterior:
    My first impression after opening the box was that the Buzz is in fact, a very well made nylon sling-bag with attractive accents. The initial fit on the back and shoulder was comfortable, and the crossover strap is wide and it fits guys and gals without interference. It’s also nicely padded and has a large durable quick disconnect fastener below your left rib area. There is a smaller adjustable waist strap for a more secure and balanced fit. I found it wasn’t necessary for casual carry although quite useful when riding a bike or running to catch that flight.
    Interior:
    The Buzz has two main compartments with waterproof zippers that don’t snag and they seal very well.
    The main compartment houses a unique padded panel with a fitted corner, similar to a fitted bed sheet that stretches over one corner of the MacBook Pro. The space between the computer holder and the zippered panel provides room for a book, magazines, documents, or even a small travel neck pillow.
    The second zippered compartment is on the very back and is slightly smaller or stepped down from the main compartment. It includes the usual key strap and some angled stitched pockets for pens, business cards and one larger pocket that can hold a Passport or airline tickets, etc.
    The third compartment is on the exterior right side and is made of elastic material and is designed to hold a bottle, small umbrella or equivalent. It also has two pull straps to further secure its contents.
    Finally, there is a super convenient compartment in the center of the crossover strap with a Velcro closure. This is my favorite feature, since it holds your cell, iPod or more notably, the new iPhone securely across your chest.
    Field Tests:
    I harnessed the Buzz, adjusted the straps and wore it for a week in and around town. The Buzz and its sling design holds' the 15-inch MacBook Pro, cables, charger, etc. in a vertical orientation on the back. This permits full range of motion for both arms, unlike most soft-sided computer briefcases.
    At times, I wanted to shift the load, so I simply reached around with my left hand and lifted up slightly on the bottom as I grabbed the ferry-loop (top strap) with my right hand. In this manner, you can easily adjust the tension on the crossover strap.
    The Buzz shoulder bag is advertised as offering “moderate” protection, although it’s quite adequate for most common travel activities. However, I wanted to see if I could fit my MacBook Pro while stuffed in the Tucano “Second Skin” sleeve. To my delight, it fit nearly perfect as though it was made for “The Buzz”. This combination effectively increases the travel protection by at least 2:1.
    Wish List:
    Accessory provisions or lack thereof, is a shortfall with many bag manufactures. User’s end up stuffing their charger, cables and adapters into secondary bags which all end up at the bottom, resulting in disorganized clutter. I visualize a removable fitted panel with separate compartments or straps that hold a basic array of typical computing items. In fact, I ended up using one of my luggage toiletry panels to help organize my computer gear in the Buzz. It holds everything vertically and eliminated the pile at the bottom.
    After field-testing, I decided this bag was definitely a keeper’. However, I would prefer a tighter fit of the MacBook Pro or a matching sleeve. I would also favor a more contoured and softer crossover strap with an exterior I.D. card and pen/pencil slot. Since I’m dreaming here, how about a less abrasive backside for improved comfort.
    Conclusion:
    The Buzz sling bag is a well-made, lightweight, ergonomic alternative to a backpack or the horizontal briefcase design. It holds most everything one might need for mobile computing while providing an excellent provision for Apple’s new iPhone.
    Regards,
    ~DD
    References:
    http://www.tombihn.com/page/001/PROD/TBP/TB0151
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=114 576C9&nplm=TJ953VC/A
     MBP Core Duo: 15"/2.16/2GB DDR/7200HD   Mac OS X (10.4.10)   "New" AEBS w/n-draft

  • What is your favorite transaction and why?

    Just wondering what your secret tools are... Willing to share? Transactions you use all the time, and without them you would be, uh, toast...
    My favorite one is SE84 Repository Information System. I use it regularly to find objects in repository, like database tables, views, table fields, function groups, function modules, programs, logical databases, message classes, message number, SET/GET parameters, transactions, variants, screens, business add-ins, customer exits, change requests and authorizations.
    A useful hint: You can also search by application hierarcy. For example, in 4.6c to find customer exits within MM, do as follows:
    1. Start SE81
    2. Select subtree MM with F9
    3. Click Information system. SE84 is displayed.
    4. Click Envir. and then Exit techniques and then Customer exits. Click enhancements. A search screen is displayed and development class field is pre-filled.
    5. Press F8
    What is your favorite transaction and why?
    Regards,
    Jarmo Tuominen

    clearly SE80.
    Starting 4.7 you have a button on top of the tree navigation where you can click the information system.
    So you have (at least) three transactions in one: SE80, se84(85 and SE38.
    I wonder why still some people prefer SE38. It's just SE80 minus functionality and overview plus wasted screen space.
    Is there any existing function you can execute from SE38 that is not available in SE38? A lot the other way round.
    regards,
    Clemens

  • Every time I try to download Java for Lion (no matter what the source) all I get is a document image labelled "unconfirmed download" and a warning that this type of file may harm my computer. What am I doin wrong?

    Every time I try to download Java for Lion (no matter what the source) all I get is a document image labelled "unconfirmed download" and a warning that this type of file may harm my computer. What am I doin wrong?

    Donna...
    Even from Apple?  >  Java for OS X Lion Update 1
    Restart your Mac before trying to download the file.
    Do you have anti virus software installed or a program like LIttle Snitch?
    If you are using Safari to download files, go to the Safari menu bar click Safari > Empty Cache
    If that doesn't help, back to the menu bar, click Safari > Reset Safari. Select the top 5 boxes then click Reset.
    If you still can't download the Java file, go to ~ / Library / Caches / com.apple.Safari
    Move the Cache.db file from the com.apple.Safari folder to the Trash and restart your Mac. Try downloading that file again.
    If it still won't download without that dialog, go to ~/Library/Safari. Move the Downloads.plist file from the Safari folder to the Trash.
    Try again.
    ~ (Tilde) character represents the Home folder.
    For Lion:   To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

  • What are your favorite U.S. cities to travel to?

    Can't speak for Chicago, but my favourite city to either live in or visit since I've been in the US is Seattle - by far. Always something going on, great food. And football (Sounders!)

    I am heading to Chicago tomorrow to visit friends and the countdown is in full swing...I've only been to Chicago when it was freeeeezing, so I am very much looking forward to spending time on the water this time around!My mom is a flight attendant, so I've grown up traveling around the U.S., and so far, I'd say my two favorite cities (aside from Austin, where I live) are Chicago (even in the snow it was absolutely amazing) and San Diego. Nothing like the energy of a metropolitan city or the calmness of the beach.What are your favorite U.S. cities to travel to?PS. If you have any "must-do" recommendations while I'm in Chi-Town, I'm all ears! =)
    This topic first appeared in the Spiceworks Community

  • What's Your Favorite Game to Play?

    Hi,
    Just curious to see, for those Blackberry users among you who play games from time to time, what is your favorite game?  For me, it is Ka-Glom.  Another favorite of mine is Word Mole.  Just wanted to hear from some of you and get your thoughts.
    Doc
    Happy Birthday America...

    Doc I have had to delete all my games but Word Mole because of low memory. I guess that is my one biggest complaint on the Storm 1 is the low amount of Mb that comes on board. I assume there is no way to go into the MOBO of the phone and unsolder the memory chip and put a 500Mb chip instead?
    Happy Fourth to every one!!!

  • What is your favorite improvement in Firmware v1.2.0

    Hello,
    We have recently posted a new firmware version to the download center for the Cisco Smart Storage series.
    Improvements
    Resource Monitor
    Web File Manager
    UPS Support improvements
    NFS version4
    SFTP
    HFS+
    iSCSI v3
    Multimedia Station
    Mount ISO Shares
    Virtual Host
    Time Machine updates
    Download the new version and let us know what is your favorite improvement?

    Hi Eric,
      Sorry for the frustration. The firmware 1.2.0 comes with new version of iSCSI (v2). The NSS is now can support multiple LUN on the same iSCSI target and the maximun increase to 256 iSCSI target instead of iSCSI version in firmware 1.1.0 where user can only work with the max of 8 iSCSI targets. While the upgrade can produced much more value, including the migration of iSCSI target to the new scheme of iSCSI version 2. It is neccessary for user to re-initiate the iSCSI initiator again in order to establish the stable iSCSI connection.  All your data are still intact. When you re-do the iSCSI initiator, you will have everything back like you used to have and much more new improve/enhancement features that FW 1.2 has to offer.
    SInce you are using iSCSI feature,  the backward firmware compatibility is strongly not recommended.  Please call support team to understand the iSCSI scheme changes.
    Please let us know so we can provide further assistant to you.
    Best Regards,
    Clint Doan

  • ***What is your favorite VI or other software to view large sets of waveform data?

    What is your favorite VI or other software to view large sets of
    waveform data?
    I have to look at waveforms with several sets of y data of 10000 or so
    points. Should I put this into Excel? There are no cursors, or zoom
    capabilities, and so on in Excel.
    Using a graph in LV is very slow when loaded down with this much data.
    Frankly a scope is easier for viewing waveforms. A scopelike utility
    for Windows?
    MathCAD?
    Is there any neat shareware out there?
    Thanks for your opinion,
    Mike

    There are a large number of analysis packages on the market that can display very large datasets. The one to choose depends largely on the nature of the data and what you want to do with it after you have loaded it in. Wandering down the software aisle at your local Staples you will find at least two or three.
    With datsets the size you are contemplating, a major feature to look for is a zoom function that initially shows the entire waveform but lets you narrow in on the data you want to see.
    DIGRESSION ALERT
    Actually, this sort of algorithm isn't to hard to code. I wrote a viewer once that allowed you to view datasets of arbitrarily large size (in V3 I think... though it may have been in V4). The code initally presented an overview of the entire dataset
    by decimating it down to a size that LV could display rapidly. As the user zoomed in using the cursors (not LV's graph zoom) the code would extract the selected portion of the data, redecimate it if necessary and redraw the display. (Which by the way is all the fancy packages really do anyway.)
    The tricky part is selecting a decimation function that retains the overall shape of the data.
    ENDOF DIGRESSION
    Several years ago I wrote an article for a magazine (Personal Engineering and Instrumentation News) that dealt with graphing packages that could handle a million datapoints at that time (late eighties) there were over a dozen programs--and they were all better than Excel...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

Maybe you are looking for

  • An error has occurred: An unknown error has occurred

    I have a report using InvoView for input parameters and displaying the output.  The report uses a date range to select data from the database.  I can run the report for many dates and date ranges, but when I use one particular date the report produce

  • SAP NW BPM deploy issue

    Hi Gurus, I got an issue of SAP NW BPM deployment after I developed a NW BPM process example. The BPM example is used for interacting with SAP PO AEX for message orchistration. I paste the error text as below, hope someone could help me: ============

  • Reading Environment Variable

    Hi everybody I'm trying to read an environment variable value, but I don't know how to do it. Thanks.

  • Toast 8:  number of jpegs on CD - Mac: unlimited  PC: limited but how many?

    I Make "Photo CDs" on Mac using Roxio Toast 8. They work fine on Mac. But some of my PC customers are having problems with pictures displaying on their Windows XP systems. A PC friend says their may be a limit to how many pic files a PC can handle fr

  • Monitoring Transactions by name

    Hi, when monitoring transactions by name, the name is the class and method of the called ejb. This does not make a sense if the same physical bean is deployed several times with different jndi names. Is there any possibility or plan to distinguish tr