What key combination do i use?

To drag a box around a part of the screen and then for it took save the area as a picture?

Apple-shift-4 will give you a crosshair cursor that will let you drag to select a part of the screen. If you press Apple-shift-4 and then press the space bar, you can take a picture of a whole window that will be cropped for you. The files are saved on your Desktop.
-Doug

Similar Messages

  • What key combination cleans up system files on restart?

    My system has become slow and I think it has a lot of junk files and such that need to be deleted.  I remember there is a key combination that you can use on a restart to delete this files.  Anyone remember what that combination is?

    CoyoteBMW wrote:
    I remember there is a key combination that you can use on a restart to delete this files. 
    Wish it was that easy.  The most simple way is to empty your trash.
    Other Resources:
    Seven ways to free up drive space Where did my  Disk Space  go?
    Slimming your hard drive
    Seven ways to free up drive space
    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.
    FreeSpace cost $.99 - FreeSpace shows you how much space is available on all local, connected, and network drives with a single click.
    Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

  • Key combination on wireless keyboard

    please can someone let me know what the key combination is to get the hashtag symbol

    If you go to System Preferences/Keyboard/Keyboard and check to show viewers in menu bar, then in the menu bar show Keyboard viewer, you can see what key combinations do what.

  • Restrict key combination using authorisation

    Hello experts
    Need a help.
    I have a scenario, wherein I go to tcode MN04 or MN05, enter any output type for purchase order eg. NEU.
    When I click on key combination button, I want the second radio button to work only and give me the output ie. Puchasing output determination Doc Type/puch org/vendor.
    When I would try to use the first radio button ie. Puchasing output determination Purch org/vendor for EDI or the third radio button
    Puchasing output determination: Document type, I should get an error.
    Is it possible to restrict them using authorosation or any path in SPRO to restrict the radio buttons for key combination in MN04/ MN05.
    Thanks
    Amitava

    V1 is for Sales, V2 fo shipping, V3 for Billing.....................
    As i said earlier - what you ask for cannot be done for MN04 and MN05 and both transactions check for V_KONH_VKS authorization object and this object has only 2 fields Activity and Condition type
    So with what we have we can restrict only on the condition type but not at the access key level
    Could you let us know, why would you want to restrict a few access keys for particular condition type? What is the target to achieve ?

  • Re: Using Alt-Key combinations

    Unfortunately this happens not only with Alt-Key combinations. It also
    happens with the ordinary F10 key: Windows activates the menu and then
    Forte gets the FKey event. The problem is that now the user has to press
    ESC to deactivate the menu and continue normal processing. There is no
    known cure yet...
    Tony Elmore wrote:
    >
    We are attempting to use Alt-Key combinations for a shortcut key combination
    for push buttons using the SetAsFunctionKey method and FunctionKeyPress
    event. When we press the Alt-Key combination, it appears that Windows is
    trying to find a menu item with that shortcut combination or a button with
    that combination. Since Windows can not find the proper element with that
    combination, it beeps at us. At that point, Forte picks up the key
    combination and will post the FunctionKeyPress event.
    The application will work fine, but the beep is not only annoying, but also
    is misleading for those individuals using accessibility tools like screen
    readers who rely upon audible queues for detecting errors in keyboarding.
    Has anyone found any viable solutions to this problem?--
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    petelewis wrote:
    Mr.Elendig wrote:it returns ^[a as it should.
    Ah ha - okay. So you're using escapes too, rather than meta8 (this is the default, so makes sense). Yeah, I got it working doing that, but had to adapt my .vimrc to get it to acknowledge the ^[ as "alt". Didn't you, or did a simple map of e.g. <A-a> suffice?
    Are you running it in screen/tmux btw? and what is your TERM set to?
    Yeah, I thought that too and though I do run it in tmux usually, I've been testing it both with and without (TERM is set to screen-256color BTW) and it made no difference. Still, unless I specifically map the ^[ to alt in vim, it doesn't work. With meta8 it works so long as the locale is not UTF-8.
    Guess I've got a workaround for now, but it would be nice if meta8 and utf-8 worked nicely together.
    Thanks.
    Could you please show how your vimrc looks like? I have the same problem and I'm interested in your workaround.

  • I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

    I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

    Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
    Stefan

  • Today I tried to shutdown my computer and a window popped up saying that my computer could not shut down because the mail application was open, it wouldn't close, so I used a key combination to force mail to quit and now I can't log in. Help?

    Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Avast! Uninstall

  • When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    See if this post by turingtest2 fixes it : key not valid for use in specified state

  • I get this error when downloading key not valid for use in specified state what do i do

    i get this error when downloading key not valid for use in specified state what do i do

    What is your operating system?  What are you trying to download?

  • When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it?

    When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it? I am using a pc laptop if that makes any difference.

    Try reading through this thread: key not valid for use in specified state. Possible solution involves moving the RSA folder. Rather than deleting it as aniwack suggested I'd try this:
    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    tt2

  • What is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro

    I need to send a CTRL-BREAK key sequence to a router via console terminal. what is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro
    I can't seem to find any documentation on how to send a CTRL-BREAK sequence
    TIA

    In the Terminal application, select the 'Help > Terminal Help' menu item. In the help window that opens, click on the link 'Shortcuts for Terminal.' Scroll down to the line beginning 'Send break.'

  • Repricing of Custom Field used in Key combination for Pricing

    Hi,
    we have created a custom field and this field is being used in the Key combination for Pricing. For standard fields we all know that the pricing condition is repriced once the value of the key field is changed in the document automatically (not manual update)
    The problem with this having the custom field in the Key combination is that when this fiel value is changed in the document the condition is not repriced automatically. We need to Do the price update manually for determining the new condition value.
    Request you to help in solving the issue. Do explain the things to be carried out for automatic pricing for the Custom fields added.
    Thank you in advancd.
    Regard
    Kula

    Hi Kulasekar,
    I think you have to implement Badi CRM_COND_COM_BADI, update communication structure with updated value from transaction should do reprice.
    Hope this helps!!!

  • Using the Alt Key combination

    Hi,
    I am using the alt-key combination, Alt-9734, to produce this star ☆ in a marquee I created in DW 5.5. Works fine in IE but not Safari or Chrome. In these two browsers the star is showing as,
    ☆  ☆  ☆   , any ideas. Thanks,
    Frank

    You could use the following html entity code in your source view where you want the star, remove the spaces...
    & # 9734 ;
    or
    & star ;
    Here's a  reference page for all of the other speical characters..
    http://dev.w3.org/html5/html-author/charref

  • HT201974 What Key combo is used to see extended info regarding my airport signal?

    Can someone tell me the key combinations used to allow me to see extended info regarding my airport signal when I click on airport icon in menubar? things like security key, transmit rate, etc.
    I remmeber it being a combination of keys using command button and then left clicking on the aiport icon in the menubar.
    Thanks
    RezF

    Hold down the option key on your Mac while you click on the AirPort icon at the top of the screen.

  • When using scroll lock key to save work what keys do I use

    When using scroll lock key to save work what keys do I use

    Welcome to Apple Support Communities
    To mirror your Mac's display onto your TV, press Command and F1 keys. Read > http://support.apple.com/kb/HT5019

Maybe you are looking for

  • How to update a single field in Word macro

    Hello, I am trying to create an AutoOpen() macro that will update the file name and path when user opens in a Word document, but I can't seem to find anything explaining how to update a single field, specifically the {FILENAME \p} field.  There are o

  • Editing and sharing custom metadata/keywords through Adobe Drive in Adobe Bridge

    I am part of a four-person video production unit operating within a local governmental entity. We are currently using four licenses of Adobe Master Collection CS5, and are about to get access to dedicated SAN storage. We would like each user to have

  • Gx620 HDMI higher refresh rates

    Hello, I've bought a Samsung SyncMaster 2233rz to get a lower inputlag and higher refresh rates. GeForce 9600m GT doesn't have a DVI-D port, thus I'm using the HDMI port with a DVI-D adapter as the monitor only has a DVI-D port. I've read you couldn'

  • Between ......and........operator

    Hi all, I am using between and operator and getting the following result. select empno,ename,sal from emp where sal between 1500 and 3000; EMPNO ENAME SAL 7499 gunit 1600 7566 gunit 2975 7698 gunit 2850 7782 gunit 2450 but when i use null it gives me

  • Frame Duration not selectable when clicking on show info for jepgs & stills

    I have imported still images into imovie HD6 and cannot select the duration any clip. I have tried both, pressing apple+i and double-clicking the image. The only thing that works is the manual slider control in the timeline section. The problem is I'