What kind of analysis should i use for these signals?

i'm developing a lie detection system,i have one respiratory sensor and a hand grip heart rate monitor to acuire the physiological signals from the sensors.i have attached a screenshot of the application.the top signal represents the heart beat and bottom one is respiratory signals.my question is that what analysis mwthods should i be using for these signal types?would you please care to help me on this? thank you.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

Similar Messages

HT5299 What kind of cable should I use for movies on my macbook pro if I want to watch it on my 60 inch tv?

What kind of cable for my macbook pro, do I use to watch movies on my 60 inch tv ?

Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Clinton

What kind of motor should I use for lifting a heavy load?

I'm working on an automation application in which I need to control a lifting mechanism with heavy load (about 120 lbs). I will be getting constant temperature readings and based on that data I can determine the rate of change of the temperature. If the temperature rate is too fast then I need to be able to slow down the motor, if it is too slow then I need to speed it up. I'm looking for some support with choosing the right motor and hardware so that I have full speed control, while still being able to lift this heavy load, hold the load in a certain position, and then raise the load back to its original position. I was considering a stepper motor for this due to its ability to brake so the load can stabilize. Is this the right call or should I use a continuous servo? Where can I get such a stepper that can handle this type of load and has software that interfaces with LabVIEW? Would I be safe getting low-cost hardware for this application? Any guidance would be sincerely appreciated. Thanks.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

What Kinde of program should I use for mastering?

I had a litle problem with mastering my songs what I made with Logic Pro X is not enough laud. I need some help that what is a program to use mastering?

You can master your tracks in logic. Bounce the song and import into a fresh logic project, then just apply your mastering processes there. However, mastering is a task that does require a very special skill set and a very good listening environment. Just having the software doesn't make a good master.
Cheers,
Jazz

What frame rate timeline should I use for 1080p 60fps premiere pro

When using 1080p 60fps clips what sequence should I use when creating a timeline that would work the best for slow mo application?
I read that you should use a 24 fps timeline but i'm not sure?
Also I have a few 720 @ 120 fps, should I create a separate sequence for that and what kind of timeline should I use since cs5 only has 1080 @ 60fps option?

24 is a good frame rate for most animations but some people like 30 and for the max stress on user systems and animation smoothness, use 60.

What external Hard drive should I use for Final Cut Pro?

Hi:
I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
PD: I have a NVIDIA on a PCI Express graphic slot.
Thanks,
Cabezon

You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
bogiesan

Question About what Azure Services I should be using for mobile app with website.

Hello,
I am wondering what Azure service would be best for my new application. I need to have an SQL database that I can connect to and modify from both a website and a mobile app preferably WP8 and Android. I was not really understanding whether I would need a
mobile service or normal SQL database. Which should I use or am I completely off track?
Thanks,
Matthias

Mobile Services uses SQL Database, nothing special on that SQL Database, its just like any other "normal" SQL Database.
Mobile Services provides "back-end services" that simplifies accessing SQL Database, Notification services, authentication, etc...
Let's assume you don't use Mobile Services, to use SQL Database, you would need your app (both mobile and web) to connect to the database. In practice, you will not want to expose your SQL database directly, so you'd end-up writing some kind of a "facade"
that your app will access instead of directly connecting to the database.
Instead of writing that "facade", Mobile services provides that for you (you still have to write code though, but less than what you need to write if you're rolling your own).
Both your web app and mobile apps can share the same SQL database (pay attention to the mobile service schema).
To help you decide, ask yourself what other features will your mobile app require? Authentication? Notification? etc... are you prepared to write those on your own or use various libraries instead of one?

My iMac was infected with a virus or malware the other night. I was told that I didn't have any firewall protection. How do I fix that? And what kind of software should I use to protect my computer from further attacks?

I am running OS X Version 10.9.5 on n iMac I brought in 2011. Had a virus or malware attack the other night and a window opened with a # to call for help. Didn't know if I should trust the # but ended up calling it anyway and paid to have them 'fix' things. Was told I didn't have firewall protection. Am not sure if I do now. [It still says to allow all incoming connections]. So what do I do now? And what kind of antivirus program is recommended?
Firewall

Read "Ransomware" web pages.
Assuming you let the scam outfit remotely control your Mac, the information on it can no longer be considered secure. Neither can the Mac itself. You should immediately shut it down and take actions to prevent or recover from identity theft, which is quite likely to have occurred. This means contacting the financial institutions and other companies that may permit access to your accounts using login names and passwords, canceling and replacing credit cards, and similar actions that only you can know.
Determine if you can contest the charge made to your credit card for this criminal transgression.
And what kind of antivirus program is recommended?
None. The Mac is highly secure against malware or virus intrusion, but nothing can prevent you from willfully installing dubious software or granting remote access to criminals. No "anti-virus" software in the world will protect you from that. The OS X application firewall is not intended to prevent this sort of occurrence.

What external hdd bus should I use for FCP 7?

Howdy! My colleague and I are editing a film in FCP 7, and media handling has become somewhat, complicated, shall we say. So we decided that we're both going to buy external hard drives, and keep them in synch using something like Super Duper, or Carbon Copy Cloner. I've been doing some research, but I'm still unsure as to what connection I should use? We're both using MacBook Pro's with firewire 800 ports, and USB 2.0 ports (No thunderbolt). Since these drives are going to be used exclusivly for video and audio, how fast of a connection should we have so that the connection doesn't cause a bottle neck? I know that Sata III can do up to 6.0 Gb/s, but I also know that a hard drive can't utilize that much bandwidth. So will USB 2.0 slow it down, or would it be fast enough? Or should I opt for firewire 800?
This is the hard drive I'm looking at getting, and I'll put it in an external encloser:
http://http://www.newegg.com/Product/Product.aspx?Item=N82E16822145475&nm_mc=EMC -IGNEFL082611&cm_mmc=EMC-IGNEFL082611-_-EMC-082611-Index-_-InternalHardDrives-_- 22145475-L0B
Thanks!
Paul
P.S. is 5200rpm's enough, or should I get 7200rpm?

If you plan to use the drive for editing/rendering media files, you'll need a 7200rpm drive and a Firewire or eSATA connection.
If you're only using the drive for backup purposes or general data storage, USB and 5400rpm will work.
-DH

What kind of virus protection to use for

wondering what kind of virus protection would be able to use although that the I'Macs has Melware and also what kind of security system would go good with a time capsule?
thanks
Richard Descoteaux Jr.

Regarding the anti-virus software, see my Mac Malware Guide.
As for the security system for a Time Capsule, what kind of security system are you referring to? If you want your backups to be encrypted, see:
http://pondini.org/TM/31.html
If that's not it, you'll need to be more specific.

What kind of inforobject can be used for compounding while creating charac

Hi all :
     what kind of standard inforobject can be used for compounding while creating characteristic ?
    I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1      Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text)      QLong text exists
2              0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
   Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AM

Hi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit.

What kind of SSD should I use and will it benefit my laptop?

My Macbook Pro (either early or late 2008, not sure) is in dire need of an upgrade. I'm thinking about upgrading it to a 128 GB SSD-drive and was wondering if anybody has experience with the performance-gains (especially in Adobe Photoshop) and what kind of drives anyone would recommended? It's quite difficult to find recent info on this online so any help would be greatly appreciated.
Cheers,
Michiel

Ah, this opens up new perspectives. Could you shed some light on the RAM-subject? How can I find out what model I have and what kind of RAM I need? I mean, logic dictates I need the same RAM I have now, but I'm sure there has been some development on those voodoo-sticks that should make them faster etc.
Also, any info on the SSD-thing is still greatly appreciated. Upgrading RAM ánd HD is ofcourse better then just switching to an SSD..

Isolate lips--what face paint color should I use for best green screen keying effect?

Hello there! I am using Elements 11.
It sounds like I answered my question in my question. Green, right? But , face paint doesn't have the reflective, glossy quality that a true green screen would have. Does that change anything? Should I look for green face paint or would another color work better in this context?
Again, I'd like to isolate the lips of my subject. The shot will be a close-up, framed to where it only includes lips, chin and nose. Let me know if it'll help to provide a screenshot.
One more question... Once I've removed the background and isolated the lips, is it possible to move them around the frame discretely? Meaning, they appear here in bottom center and then suddenly appear in upper left corner?
Thanks for your time!

Thanks for replying AT!
I am using Mac version. Good question since I do NOT have Chromakey.
To help us along, I have uploaded a number of images from a test I did yesterday.
I am getting some results but they are imperfect.
I do believe my main issue has to do with a lack of uniform LIGHTING. As my subject's lips move, it creates shadows thus making it difficult for Elements to pick up the green.
I used Non-Red Key and then Garbage Matte to get the results that you see.
Thanks!

What are the tables to be used for these reports

hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.

Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps

What type of DVD should I use for Windows Backup?

I am wanting to do my Windows Backup and I was wondering what type of DVD media I should use. Is it better to use a RW or only R type DVD.
I have an HP Omni 220-1180qd, A5W89AV#ABA, running Win7 64 bit.
I thought I read it can use CD's, DVD's but I want to know which would be the better choice.
Thanks for any help and all help is appreciated.
This question was solved.
View Solution.

Honestly, an external hard drive would be a better choice. The difference between +R and +R/W is that +R is "Recordable" and +R/W is "Re-Writable". If you intend on making periodic backups, go with an extrernal hard drive... If you intend on making very few backups, consider the DVD+R discs.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

What kind of analysis should i use for these signals?

Similar Messages

Maybe you are looking for