What kind of audio filter would i use.

i need an audio filter that will bring out a distant clapping noise thats you cant even hear during playback. i have raised the dB as high as possible. is there a way to get it heard at all?

Just be aware, that if the audio is very slight and you raise the level .. you will also raise the levels of any surrounding room noise, etc ... so you will get a lot of hiss and maybe even echo. You can also double up the clip to increase the volume but I doubt you would be left with anything useful
Been there, done that, cursed the cameraman

Similar Messages

  • What kind of CD-R should I use?

    I've recently had problems burning CD's from iTunes . . .the CD's seem to burn correctly, but when I insert them into one of several DVD players, they skip, pop and do other weird things. (Burning DVDs from iDVD runs smoothly.) I have the original drive that came with my G5 as follows: PIONEER DVD-RW DVR-117D.
    Reading through the forums, it seems that the type of media used is a common cause of problems like this. I don't know what kind of CD's I was using before, but the spindle I have now contains Memorex CD's with a 52X max speed, and hold 700 MB.
    I think my drive has a maximum speed of 16X, so I tested burning at 16X and then 4X . . .I got the same results.
    If I'm reading the threads correctly, my drive would work best with 650 MB disks with a max burn speed of 16X. As far as I can tell from Goggling however, that kind of disk is no longer exists.
    So what specs should I look for that will be most compatible with my drive?
    Thanks!
    Bryce

    Thanks! It looks like these drives are only $26 . . .I'll bet I've spent at least half that much in wasted CD's over the past few days.
    Perhaps this next question should go over to the Final Cut Pro discussions, but I'll start here . . .as long as I'm considering replacing the drive, I'm wondering if I should upgrade to something better/faster.
    I remember there being an issue some years ago that software like iDVD and DVD Studio Pro would only write to certain Apple sanctioned DVD burners.
    For me, it's less about the money and more about have equipment that works properly . . .and faster (time is money).
    Any advice about upgrading?

  • What kind of VGA adaptor do I use with my ibook G4?, What kind of VGA adaptor do I use with my ibook G4?

    I bought a VGA adaptor wire for my Mac ibook G4, but it doesn't fit my port.  What kind of VGA adaptor do I use?

    Hi, and welcome to Apple Support Community.
    You need the Apple VGA Display Adapter. This is for video-out to an external display. It will not get you the audio.
    If you want video out to a TV, it will require a different adapter.
    https://discussions.apple.com/docs/DOC-1908

  • What kind of FIR filter in Labview SignalExpress Tektronix Edition?

    I am using FIR filter in Labview SignalExpress Tektronix Edition to process signal acquired from the TDS3032B.But i dont know what kind of this filter(Window,least-squares,or equiripple...).Does any one know about this?

    Check out some of NIs links:
    Virtual Instrumentation Empowers Digital Signal Processing Design
    http://zone.ni.com/devzone/cda/tut/p/id/4759
    Designing Filters Using the NI LabVIEW Digital Filter Design Toolkit
    http://zone.ni.com/devzone/cda/tut/p/id/3237
    lots of information about different FIR can be found by searching on google as well.
    National Instruments

  • What kind of blank discs should I use on my macbook?

    What kind of blank discs should I use on my macbook?

    cd-r - for burning audio and MP3 cd's for playback on stereos via iTunes and storing under 700MB in files.
    dvd-r - for burning data dvd's and movies to 4.5GB
    dvd-r ds - dual sided for 9GB
    dvd-r dl - for dual layer on one side about 9GB total, good for making copies of OS X install disks
    dvd-r dl ds  - dual layer double sided for about 18GB total
    then there is blueray dvd's but that requires a external burner and special disks for even larger amounts of data.
    If you see "+" instead of "-" like cd+r, it's a differnet format on the disk, but most all new modern machines can read/burn either now.
    Older machines might only be "-" or "+" with "-" being the most commonly used.

  • What kind of view object would I need to create to achieve this ADF form?

    I have an entity that has several dates. The dates are stored in a table separate from the entity, each entity date has a date type (open, close, interview, etc) associated with it. The DBAs idea (who else of course!) was to have the flexibility to add new types of dates for entities when needed.
    So you have tables like this -
    Table: EntityTable
    Columns: EntityId, EntityName
    Table: DatesTable
    Columns: EntityId, Date, DateTypeCd
    I need to display an editable ADF form where I can update the entity and the entity dates
    The ADF form would contain something like this
    Entity Name: []
    Opening Date: []
    Closing Date: []
    Interview Date: []
    What kind of view object would I need to create to achieve this?

    That would be a master-detail relation 1-* between 'entity' and 'entity dates'. If your dba has set up the foreign key association in the db and you use the wizard to create the business objects, jdev pick up the relation and create the correct master detail relation in the vo layer for you.
    By the way naming a table 'entity' is not a good idea when working with ADFbc. We all talk about entities when we relate to a business object (in this case a row of a table or entity object or EO). So it's hard to distinguish the two, your specific table 'entiyt' and the common term entity or EO which can be a row of any table.
    Timo

  • What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    Really, this is a question you should be asking yourself...
    What do you shoot? Makes a difference...
    Typical ISO that you shoot? Makes a difference...
    Shooting for clients or yourself? Makes a difference...
    Look, there is no magic bullet...the ACR/LR "Default" should only be changed for those adjustments you make 70-90% of the time and sould not be confused with image by image adjustments...
    So, as asked, your question can not really be answered other than to say, use a default that suits you.

  • What is facetime audio and can I use it to make free international calls between iPhones?

    what is facetime audio and can I use it to make free international calls between iphones?

    First, check
    1. Settings > General > Restrictions: should be OFF > FaceTime: ON?
    2. Settings > FaceTime > FaceTime: ON?
         ou can be reached by FaceTime at: your phone number?
    If all the above are correct, see below:
    FaceTime is available with iPhone 4 or latter, except those iPhones that were sold in the Middle East.
    Can you tell us which iPhone model that has no FaceTime?

  • What kind of video formats can i use to import into imovie?

    what kind of video formats can i use to import into imovie?

    Hello,
    Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
    http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
    Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
    As for video streaming, there are lot of apps for that and it's just a matter of your preference.
    Hope that helps

  • What kind of glass or plastic is used for camera lens

     What kind of glass or plsastic is used for camera lens protection?
    Solved!
    Go to Solution.

    Its glass but I'll see if I can find more info on it
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • What kind of material type i should use?

    Dear all,
    I am wondering what kind of material type I should use for the following type of material:
    The material is Chicken used in like KFC- type of eatery franchise store.
    The eatery franchise store buy the chicken from external party, next, this store process this chicken (i.e. cut into pieces) and become chicken salad and sell this chicken salad to their consumer.
    Personally, I donu2019t think this kind of material can be classified as HAWA (i.e. trading mat type) as the material is not buying and later selling as a same physical product like the retail store.
    But it is buy and process it, and sell.
    Please help shed some light for me. Thanks.
    tuff

    Hi we have not using SAP, it is a new project.
    kindly please read my question carefully...
    basically it is like this...
    the chicken the restaurant chain purchased are later process into multiple meal dishes (i.e. Salad Chicken, Chicken with rice, Roast Chicken), and sell to customer directly.
    Therefore, looking at your feedback, I can use the SEMI-FG material type for the Chicken for the buying, correct?
    But this raise another question in which how do I track the goods issue quantity when the meal dishes is sold, so that my Chicken stock quantity can reflect correctly in the SAP system?
    currently they are not using BOM as the franchise holder does not wish to disclose the meal ingredient scret (i.e BOM) to their invidual franchise store.
    please advise. thanks
    Thanks.
    Tuff

  • What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

    Hi,
    What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
    Ushas Symon

    It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
    Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
    Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
    The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
    your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
    Good luck.

  • What kind of range extender can I use with airport express

    WHat kind of range extender can I use with an airport express?

    WHat kind of range extender can I use with an airport express?
    Use any router that you want if you will be connecting the extender/router back to the AirPort Express using a permanent, wired Ethernet cable connection.
    If you are planning to use a wireless connection to extend the range of the network.....then another AirPort Express, AirPort Extreme or Time Capsule will be required.

  • ActiveX in BradySoft (CodeSoft) - What Class/Method/Object's would I use to send variable form data to BradySoft?

    What Class/Method/Object's would I use to send variable form data to BradySoft? I have a basic label setup in BradySoft and I want to send it variable form data (a serial number) from Labview ActiveX. I have attached Brady's ActiveX programmers guide but can't figure out what to use for this. P.S. I would call Brady or TekLynx tech support about this but they have a strict policy whereas BradySoft supports ActiveX but their tech support doesn't provide programming help with it. I figured I'd try the NI Forums.  

    Aaronb, I presume by publishing an ActiveX programmers manual the BradySoft software installs Active X objects. You may choose to interact with these objects within LabVIEW using Active X controls. The following link will provide a starting point for LabVIEW help topics on Active X communication: Select ActiveX Object Dialog Box
    http://zone.ni.com/reference/en-XX/help/371361F-01/lvdialog/insert_active_x_object/
    Building a Simple Web Browser Using ActiveX (Example of ActiveX arcitecture)
    http://zone.ni.com/devzone/cda/epd/p/id/81 Hope this helps provide a bit of guidance. Cheers!  

  • What kind of external microphone can I use with the MacBook Pro?

    What kind of microphone can I use with GarageBand in MacBook Pro ?

    It depends which MBP you have. Some of the newer ones don't have an audio in port, so you need a USB adapter with an audio in jack.

Maybe you are looking for